Honeywell ScanPal EDA51 User manual

ScanPal™ EDA51
powered by Android™
Quick Start Guide
EDA51-A-EN-QS-01 Rev A
11/19



1
Out of the Box
Make sure that your shipping box contains these items:
• ScanPal EDA51 mobile computer
(Model EDA51-0 or EDA51-1)
• Rechargeable Li-ion battery (see page 7)
• Hand strap (optional)
• Product documentation
If you ordered accessories for your mobile computer, verify that
they are also included with the order. Be sure to keep the original
packaging in case you need to return the mobile computer for
service.
Note: EDA51-0 models do not include a WWAN radio.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC)
industrial grade microSD™ or microSDHC™ memory cards with
ScanPal mobile computers for maximum performance and
durability. Contact a Honeywell sales representative for
additional information on qualified memory card options.

2
Mobile Computer Features
Power Indicator
Touch Panel
Return Key
Scan Status LED
Home Key
Function Key
Speaker
USB Cover
I/O Connector
Microphone

3
Scan Button
Battery Cover
Laser Safety
Label Location
Volume Button
Battery Latch
Scan Engine
Camera Lens and
Flash
Speaker

4
Remove the Battery Cover
12
3
4
5

5
Install a Nano SIM Card
Only EDA51-1 (WWAN) models support Nano SIM card use for
cellular phone feature.
Note: Always power off the computer before attempting to install or
remove a card.
Card Cover
SIM
SIM Card

6
Install a MicroSD Card (Optional)
Note: Format the microSD card before initial use.
Note: Always power off the computer before attempting to install or
remove a card.
MicroSD

7
About the Battery
The EDA51 mobile computer ships with a Li-ion battery
manufactured for Honeywell International Inc.
Model Configuration battery P/N Power
EDA51-0 50129589-001,
50134176-001
3.8 VDC,
15.2 watt-hour
EDA51-1 50129589-001,
50134176-001
3.8 VDC,
15.2 watt-hour
Configuration number (CN) is located on the label in the battery well of
the mobile computer.
We recommend use of Honeywell Li-ion battery
packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
Ensure all components are dry prior to placing the
battery in the computer. Mating wet components
may cause damage not covered by the warranty.

8
Install the Battery
1
2
Battery
(Refer to page 7)
5
3
4

9
Install the Hand Strap (Optional)
1
2
3
4