Honeywell HCD5HIH User manual

Document 800-07067V5 – Rev A – 07/2013
Reference Guide
equIP® Series
True Day/Night
Network Box Camera
NTSC / PAL
HCD5HIH HCD5HIHX
HCD5MIH HCD5MIHX
HCD5WIH HCD5WIHX

Reference Guide

Revisions
Issue Date Revisions
V2 A 11/2011 Changed 800-07067V1from a User Guide exclusively for HCD5MIH/X. Added the
HCD5HDIH(X) and HCD5MWIH(X) cameras to this User Guide.
Added a note in Chapter 2 advising that the camera should not be connected to two
different power sources at the same. Changed the number of users that can be
logged on at the same time. Changed the length of time required to hold down the
reset button. Added a note in the IP installation section suggesting that all Norton
AntiVirus software be disabled before installing the IP software.
Added the information for installing the Honeywell IP Utility on Windows 7. And added
Frame Rate to the list of available priority settings in the Compression Settings
section.
V3 A 11/2011 Removed sentence in Specifications which states that only 4 users can log on at a
time. Removed notes throughout that referred to a limited number of users that can
be logged on at a time. Updated the System Requirements. Added the step for
Enabling Microsoft .NET Framework 3.5 to the Install Honeywell IP Utility Software
section. Expanded on the Disable User Account Control section. Added WDR and
LDC to the Auto Exposure Settings table. Changed the Immunity Regulatory
specification from EN 50024 to 50130-4.
V4 A 08/2012 Corrected the description of the Alarm I/O and Audio I/O connectors in the
specifications for HCD5MIH(X) and HCD5WIH(X).
Changed EQUIP to equIP.
Updated the method for connecting to the Download Center website and
downloading the IP Utility.
V5 A 07/2013 Updated URLs on back cover.
Updated the method for finding the User Guide.
Changed "Honeywell Camera ActiveX Software" to "Honeywell PSIA IP ActiveX
Software".
Added notes about the removal of the credentials window for V49 or higher.
Updated the descriptions of ELC, ALC, and DSS, and of the descriptions of White
Balance.
Updated Specifications for the cameras, including the minimum illumination for all
cameras, the power consumption, the temperatures for all cameras, the Primary
Stream Resolutions, the AES/ELC .
Moved the "Uninstalling the ActiveX" section from Chapter 3 to Chapter 4, as well as
all Web Client information to Chapter 4.
Updated the Regulatory for all cameras.
Added a note about the automatic installation of a signed version of ActiveX when
users log onto the Honeywell IP Utility for the first time.
Changed the Conformance from LVD 2006/95/EC to GPSD 2001/95/EC.
Changed the selections for and description of DNR.
Added information about D/N Control and Alarm Interlock Day/Night Switching.
4

HCD5 equIP® Series True Day/Night Network Box Camera Reference Guide
Document 800-07067V5 Rev A 5
07/2013
Contents
About This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Overview of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cautions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Manufacturer’s Declaration of Conformance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
North America. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty and Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2 Installation and Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Before you Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Overview of the Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the Back Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Mounting the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connecting Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Restoring Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3 Installing the Honeywell IP Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
About the Honeywell IP Utility and Web Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
About the Honeywell IP Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step 1: Confirm Your System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Step 2: Install the Honeywell IP Utility Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Finding the equIP Series User Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Step 3: Log Onto the IP Utility and Discover Network Devices . . . . . . . . . . . . . . . . . . . . . . 29
Step 4: Connect to a Device and Configure Network Settings . . . . . . . . . . . . . . . . . . . . . . 31
Connecting to or Disconnecting from Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Configuring the IP Network Settings Automatically or Manually . . . . . . . . . . . . . . . . . 32
Interfacing with the equIP PSIA Device Via a Network Video Recorder . . . . . . . . . . . . . 34
Step 5: Launch the Web Client to View Live Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Uninstalling the IP Utility and/or the Bonjour Software . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Uninstalling the IP Utility Using the Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . 36
Uninstalling the IP Utility and/or the Bonjour Software Using the Control Panel . . . . . . . . 37

6
Contents
4 IP Camera Web Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
About the Web Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
User Profiles: Web Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Confirming Your System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Configuring Your OS and Browser for ActiveX Installation on Microsoft IE . . . . . . . . . . . . . . . . 41
Configuring Windows 7 (32-bit and 64-bit) and IE Security Settings . . . . . . . . . . . . . . 41
Configuring Windows XP Service Pack 3 and IE Security Settings . . . . . . . . . . . . . . . 48
Logging On and Off the IP Web Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Launching the Web Client from IP Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Logging Onto the Web Client from Internet Explorer . . . . . . . . . . . . . . . . . . . . . . 54
Uninstalling the Honeywell PSIA IP ActiveX: Microsoft IE . . . . . . . . . . . . . . . . . . . . 55
Logging Out of the Web Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Navigating the Web Client User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Live View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Taking a SnapShot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configuring IP and Firmware Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Resetting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Compression Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Primary Stream Video Codec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Secondary Stream Video Codec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Statistics: Received Bit Rate and Frame Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Camera Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Basic Camera Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Auto Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
White Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Video Analytics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Tamper Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Configuring Video Motion Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Alarm and Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Alarm Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Alarm Interlock Day/Night Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Appendix A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Problem: Live View Does Not Display the Expected Video . . . . . . . . . . . . . . . . . . . . . . . . 83
Problem: Failure of IP Utility Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Problem: Web Client Does Not Display the Expected Video . . . . . . . . . . . . . . . . . . . . . . . 84
Problem: Cannot Connect to a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Appendix B HCD5HIH(X) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Appendix C HCD5MIH(X) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Appendix D HCD5WIH(X) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Appendix E Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

HCD5 equIP® Series True Day/Night Network Box Camera Reference Guide
Document 800-07067V5 Rev A 7
07/2013
Figures
Figure 1-1 Camera Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 2-1 Back Focus Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Figure 2-2 Camera Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 2-3 Camera Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 2-4 Alarm Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 2-5 Normal Alarm States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 2-6 Alarm Output Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 3-1 Honeywell IP Utility Log On Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 3-2 Honeywell IP Utility User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 3-3 Setting the IP Network Settings Automatically or Manually . . . . . . . . . . . . . . . . . . 33
Figure 3-4 ActiveX Prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 3-5 Web Client Interface After Logging On . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 4-1 Windows Firewall Settings for IE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Figure 4-2 Allowed Programs List in IE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Figure 4-3 Adding IE to the Allowed Programs List. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Figure 4-4 Searching for UAC in the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Figure 4-5 User Account Control Settings Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure 4-6 Preferred UAC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Figure 4-7 Run IE as Administrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Figure 4-8 Camera Login Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Figure 4-9 Trusted Sites Configuration Page in IE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Figure 4-10 Trusted Sites List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Figure 4-11 Adding a Whole Subnet to the List of Trusted Sites. . . . . . . . . . . . . . . . . . . . . . 48
Figure 4-12 Allowing IE through the Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Figure 4-13 Camera Login Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Figure 4-14 Trusted Sites Configuration Page in IE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 4-15 Trusted Sites List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 4-16 Adding a Whole Subnet to the List of Trusted Sites. . . . . . . . . . . . . . . . . . . . . . 52
Figure 4-17 Launching the Web Client from the IP Utility . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 4-18 ActiveX Prompt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Figure 4-19 Web Client Window Layout: Administrator Log On . . . . . . . . . . . . . . . . . . . . . . 56
Figure 4-20 Web Client: Administrator User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 4-21 Web Client: Guest User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 4-22 Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 4-23 IP and Firmware Settings: Device Information Tab . . . . . . . . . . . . . . . . . . . . . . 60

8
Figures
Figure 4-24 Compressions Settings Tab: Primary Stream . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 4-25 Primary Stream Video Codec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Figure 4-26 Secondary Stream Video Codec Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Figure 4-27 Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Figure 4-28 Bit Rate Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Figure 4-29 Frame Rate Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Figure 4-30 Camera Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Figure 4-31 Video Analytics Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Figure 4-32 Tamper Detection Settings on the Video Analytics Tab. . . . . . . . . . . . . . . . . . . . 71
Figure 4-33 Video Analytics Alarm Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Figure 4-34 Video Motion Detection Configuration - 30% Sensitivity Level . . . . . . . . . . . . . . . . 77
Figure 4-35 Video Motion Detection Configuration - 50% Sensitivity Level . . . . . . . . . . . . . . . . 77
Figure 4-36 Video Motion Detection Configuration - 80% Sensitivity Level . . . . . . . . . . . . . . . . 78
Figure 4-37 Video Motion Detection Configuration - 30% Sensitivity Level for a Wide Field of View . . . 78
Figure 4-38 Video Motion Detection Configuration - 50% Sensitivity Level for a Wide Field of View . . . 79
Figure 4-39 Video Motion Detection Configuration - 80% Sensitivity Level for a Wide Field of View . . . 79
Figure 4-40 Video Motion Detection Configuration - A Combination Setup . . . . . . . . . . . . . . . . 80
Figure 4-41 Audio and IO Settings Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Figure 4-42 D/N Control Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Figure 4-43 Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Figure A-1 Limited or No Connection Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Figure B-1 Camera Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Figure C-1 Camera Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Figure D-1 Camera Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

HCD5 equIP® Series True Day/Night Network Box Camera Reference Guide
Document 800-07067V5 Rev A 9
07/2013
Tables
Table 1-1 Network Cameras Model Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 3-1 PC Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Table 3-2 Items Installed On Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Table 3-3 IP Network Device Setting Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Table 4-1 User Profiles and Permissions for the Web Client . . . . . . . . . . . . . . . . . . . . . . . 40
Table 4-2 PC Minimum Requirements for ActiveX . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Table 4-3 Tabs in the Web Client Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 4-4 Video Streaming Resolutions - 1080p Resolution Primary Stream . . . . . . . . . . . . . . 63
Table 4-5 Video Streaming Resolutions - 720p Resolution Primary Stream . . . . . . . . . . . . . . . 64
Table 4-6 Video Streaming Resolutions - 1080p Resolution Secondary Stream. . . . . . . . . . . . . 64
Table 4-7 Video Streaming Resolutions - 720p Resolution Secondary Stream . . . . . . . . . . . . . 64
Table 4-8 Compression Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Table 4-9 Selecting Quality, Bit Rate, or Frame Rate.. . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Table 4-10 Auto Exposure Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Table 4-11 White Balance Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Table 4-12 Blur Threshold Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Table 4-13 Blinding Threshold Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Table 4-14 Scene Change Threshold Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

10
Tables

HCD5 equIP® Series True Day/Night Network Box Camera Reference Guide
Document 800-07067V5 Rev A 11
07/2013
About This Document
This document introduces the Honeywell HCD5 Series of High Resolution True Day/Night
Network Box Cameras. This series includes the following cameras:
• HCD5HIH(X) 1080p True Day/Night Network Box Camera
• HCD5MIH(X) 720p True Day/Night Network Box Camera
• HCD5WIH(X) 720p Wide Dynamic True Day/Night Network Box Camera
This document explains how to install, configure and operate the camera in a network
environment. This document is intended for system installers, administrators, and
operators.
Overview of Contents
This document contains the following chapters and appendixes:
•Chapter 1, Introduction, introduces the Honeywell network box camera and gives a
functional overview of its components.
•Chapter 2, Installation and Setup, provides procedures for installing cameras, lens
adjustment, and setting up a network camera environment.
•Chapter 3, Installing the Honeywell IP Utility, describes how to install and use the
Honeywell IP Utility and web client software.
•Chapter 4, IP Camera Web Client, describes how to use the web client application to
view video and configure the available settings for the network camera.
•Appendix A, Troubleshooting, lists common problems encountered when setting up
the network camera.
•Appendix B, HCD5HIH(X) Specifications, provides specifications for HCD5HIH(X)
cameras.
•Appendix C, HCD5MIH(X) Specifications, provides specifications for HCD5MIH(X)
cameras.
•Appendix D, HCD5WIH(X) Specifications, provides specifications for HCD5WIH(X)
cameras.
•TheGlossary explains terms and initializations used in this guide.
•TheIndex provides quick access to commonly searched terms.

12
About This Document
Cautions and Warnings
Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
WARNING! 24 V AC models require the use of CSA Certified/UL Listed
Class 2 power adapters to ensure compliance with
electrical safety standards. Power over Ethernet (PoE)
should meet the IEEE 802.3 af PoE standard.
Caution When powering the camera from 24 V AC, a UPS source should
be considered to ensure satisfactory performance.
FCC Compliance Statement
Information to the User: This equipment has been tested and found to comply with the
limits for a Class B digital device. Pursuant to Part 15 of the FCC Rules, these limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
CAUTION
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND•
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this
product (applicable in the European Union and other European countries with
separate collection systems). This product should be disposed of, at the end of
its useful life, as per applicable local laws, regulations, and procedures.

HCD5 equIP® Series True Day/Night Network Box Camera Reference Guide
Document 800-07067V5 Rev A 13
07/2013
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference. For example, try reorienting or relocating the receiving antenna,
increasing the separation between the equipment and receiver, or connecting the
equipment to an outlet on a different circuit.
Caution Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Manufacturer’s Declaration of Conformance
North America
The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No.
60950-1.
Europe
The manufacturer declares that the equipment supplied with this guide is compliant with
the European Parliament and Council Directive on the Restrictions of the use of certain
Hazardous Substances in electrical and electronic equipment (2011/65/EU), the General
Product Safety Directive (2001/95/EC) and the essential requirements of the EMC
directive (2004/108/EC), conforming to the requirements of standards EN 55022 for
emissions, EN 50130-4 for immunity, and EN 60950-1 for electrical equipment safety.
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
products returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer
Service at 1.800.323.4576 for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available
for the technical service representative.

14
About This Document
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped
to Honeywell without a clearly identified Return Merchandise Authorization (RMA)
number may be refused.

Document 800-07067V5 Rev A 15
07/2013
1
Introduction
Honeywell’s High Resolution True Day/Night Network Box Cameras provide high picture
quality remote video surveillance over a network connection. See Table 1-1 for a list of
camera models.
Figure 1-1 Camera Overview
Table 1-1 Network Cameras Model Numbers
Model Number Description
HCD5HIH True Day/Night 1080p Network Camera, NTSC
HCD5HIHX True Day/Night 1080p Network Camera, PAL
HCD5MIH True Day/Night 720p Network Camera, NTSC
HCD5MIHX True Day/Night 720p Network Camera, PAL
HCD5WIH True Day/Night Wide Dynamic 720p Network Camera, NTSC
HCD5WIHX True Day/Night Wide Dynamic 720p Network Camera, PAL
Reset button restores
factory default settings
CS lens mount
Lens connector for
DC Auto Iris lens plug

16
Introduction
Features
The Honeywell Megapixel IP Box Camera has the following features:
• Mechanical Infrared (IR) cut filter ensures excellent low light performance
• Camera Tamper Detection
• Video Motion Detection
• H.264 and MJPEG compression
• Dual digital video streams simultaneously, independently configurable
• Remote firmware updates
• Support of both Dynamic and Static IP address assignment
• Multiple levels of password-protected remote access prevents unauthorized users
from altering system settings
• Advanced IP Utility software
• Web server for remote setup of camera video and network parameters
• 24 V AC or PoE IEEE 802.3 af choice of power inputs
• Input and output alarm contacts support
• Bi-directional audio support
• Local video out – aim and focus
• PSIA compliant
Camera Resolution Progressive Scan Sensor
HCD5HIH/X 1080p (1920 x 1080) 1/2.7" color CMOS
HCD5MIH/X 720p (1280 x 720) 1/4" color CMOS
HCD5WIH/X 720p (1280 x 720) 1/3" color CMOS

Document 800-07067V5 Rev A 17
07/2013
2
Installation and Setup
This chapter describes how to:
• Mount the camera(s)
• Adjust the camera(s) for the clearest image
• Set up cameras in a network system
Before you Begin
Before you install your IP box camera:
• Please read this guide carefully. Keep this guide for future reference.
• Before installing the camera, Honeywell recommends that you download the latest
software updates. Go to
http://www.honeywellsystems.com/support/download-center/index.html and follow
the instructions on the page to logon, find your camera, and then download the
latest software updates.
Note You will need a Username and Password to log in to the Download Center. To
receive a Username and Password, contact the customer service center for
your region. Contact information is found on the Download Center page.
Unpack Everything
Check that the items received match those listed on the order form and packing slip. The
packing box should include, in addition to this User Guide:
• One network camera
• 3-pin terminal block for Power input
• 4-pin terminal block for Alarm input/output
• One product warranty
• One DVD containing the product software and the User Guide

18
Installation and Setup
If any parts are missing or damaged, contact the dealer you purchased the camera from or
call Honeywell Customer Service (see Warranty and Service on page 13).
Overview of the Installation Procedure
This network camera is intended for indoor use only. If you choose to mount the camera
outdoors, you must employ a suitable weatherproof enclosure (such as Honeywell’s
HHC12 camera housing). Seewww.honeywellvideo.com/products/cameras/index.html for
information on Honeywell weatherproof enclosures and mounting brackets.
Note Please familiarize yourself with the installation procedure and complete each
step in the sequence given.
The initial installation of a network camera consists of the following steps:
Installation
Selecting the Lens
The network camera supports the use of a manual iris lens or DC (Direct Drive) auto iris
lens. When using a DC auto iris lens, it should be connected to the camera through the
4-pin square socket located at the side of the camera (see Figure 2-1).
If you are dissatisfied with the sharpness of the image, then you should ensure that you are
using a megapixel lens. For a list of recommended lenses, go to
www.honeywellvideo.com/products/cameras/index.html.
Step See …
1 Select the lens. Selecting the Lens, page 18
2 Adjust the back focus. Adjusting the Back Focus, page 19
3 Mount the camera. Mounting the Camera, page 19
4 Connect the camera. Connecting Video, page 20
5 Program the camera. Camera Setup, page 67

HCD5 equIP® Series True Day/Night Network Box Camera Reference Guide
Document 800-07067V5 Rev A 19
07/2013
Adjusting the Back Focus
The back focus adjustment is accessible at the front end of the camera housing to adjust
the back focal length or picture focus.
The range of adjustment allows the CS-mount lenses to be used without the need for a
spacer ring.
Figure 2-1 Back Focus Adjustment
1. Loosen the setscrews with a Phillips screwdriver.
2. Adjust the focus ring at the front end of the camera housing to focus the picture.
3. Re-tighten the setscrews.
Mounting the Camera
Mounting points are provided on the top and bottom of the camera and are used to mount
the camera on a bracket or tripod for indoor applications. They are designed to accept
standard sized mounting bolts (1/4 x 20). The mounting bracket must be capable of
supporting the weight of the camera and its lens.
Caution Some installation codes state that the mounting bracket must be
capable of supporting up to four times the combined weight of the
camera and lens.
For outdoor applications, mount the camera inside a weatherproof enclosure. See
www.honeywellvideo.com/products/cameras/index.html for information on Honeywell
weatherproof enclosures.
Setscrews
Reset button restores
factory default settings
Lens connector for
DC auto Iris lens
Focus
ring

20
Installation and Setup
Figure 2-2 Camera Mount
Wiring
Figure 2-3 Camera Connections
Caution Installation must be performed by a qualified service technician and
must be in accordance with all national and local mechanical and
electrical codes.
Connecting Video
Spot Monitor
The analog video connection is available as a test output and should be used during
installation to aim and focus the camera as needed.
Connect the VIDEO connector on the rear of the camera to the video input connector on
your spot monitor.
Use standard size
mounting bolts (1/4 x 20)
to mount the camera on
a bracket or tripod.
Analog video connection
for a spot monitor
24 V AC power
Audio line level input and
output connections (600
Ohm impedance).
RJ45 Ethernet network
connection (using
10Base T or 100Base
TX cable). Also for
Power over Ethernet
(PoE 802.3 af).
Alarm input (maximum rated
voltage level 24 V DC) and output.
Contacts rated 12 V DC @ 0.5 A.