Honeywell HDZ302DIN User manual

1
4
3
5
6
7
2
0
x3
M3 T15L
Honeywell | HDZ Series Cameras
8
HDZ Series IP PTZ Dome Camera
HDZ302DIN
Quick Installation Guide
Micro
SD
D
=
E
Honeywell | HDZ Series Cameras
HDZ Series IP PTZ Dome Camera
HDZ302DIN
Quick Installation Guide
Optional

WARNING
WARNING
Caution
Cautions and Warnings
2
1
5
1234
admin
6
****
****
2
3
4
1xx
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
To ensure compliance with electrical safety standards,
CSA Certified/UL Listed LPS or Class 2 power adapters are required. Power
over Ethernet (PoE) shall be provided by listed Information
Technology Equipment meeting the IEEE 802.3at PoE+ standard. The
PoE is not intended to be connected to exposed (outside plant)
networks.
To comply with EN50130-4 requirements, a UPS should be
employed when powering the camera from 24 V AC.
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Regulatory Statements
Note Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
FCC Statement of Compliance
Manufacturer's Declaration of Conformance
Waste Electrical and Electronic Equipment (WEEE)
Correct Disposal of this Product (applicable in the European Union and other
European countries with separate collection systems).
Important Safeguards
• Read and keep these instructions.
• Please ensure that your installation area can safely support the weight of the camera.
• Do not aim the camera toward a bright light source for extended periods to prevent
damage to the imager. Avoid operating the unit under or close to unstable light sources
(may cause flickering), or close to fluorescent lamps or objects reflecting light.
• Do not touch the camera lens.
• Do not drop the camera or subject it to physical shock.
• Do not use a strong or abrasive detergent when cleaning the camera.
• Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments,
where the operating temperature is outside the recommended range of 14°F to 140°F
(-10°C to 60°C).
• Avoid operating the unit close to sources of powerful electromagnetic radiation, such as
radio or TV transmitters.
The manufacturer declares that the equipment supplied with this guide is compliant
with the European Parliament and Council Directive on the Restrictions of the use of certain
hazardous substances in electrical and electronic equipment (2011/65/EU), General Product
Safety Directive (2001/95/EC), and the essential requirements of the EMC
Directive (2014/30/EU), conforming to the requirements of standards EN 55032 for
emissions, EN 50130-4 for immunity EN 60950-1 for electrical equipment safety, and,
Information to the User: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
This product should be disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.
Honeywell
[phone] (North America only)
https://www.honeywellsystems.com/ss/techsupp/index.html
Document 800-22492 – Rev.C – 11/2016
© 2016 Honeywell International Inc. All rights reserved. No part of this publication may be
reproduced by any means without written permissionfrom Honeywell. The informationin this
publication is believed to be accurate in all respects. However, Honeywell cannot assume
responsibility for any consequences resulting from the use thereof. The information contained
herein is subject to change without notice. Revisions or new editions to this publication may be
issued to incorporate such changes. For patent information, see www.honeywell.com/patents.
www.honeywell.com/security
HDZ302DIN
HDZ302DIN-001F55241124
HDZ302DIN-001F55241124
HDZ302DIN
HDZ302DIN
HDZ302DIN
1
3
Manufacturer's Name and Address
Honeywell Security(China) Co., Ltd.
Building 21, 22, 28, Section 2, Huaide Cuigang Industrial Estate,
Fuyong, Bao’an District, ShenZhen, China.
EN 50581 for RoHS.