Honeywell HD4US User manual

Configuration Guide
True Day/Night
Ultra Wide Dynamic
Fixed Minidome Camera
Document 800-08435 – Rev A – 04/11
HD4US HD4USX
NTSC / PAL

2
Revisions
Issue Date Revisions
A04/11Newdocument.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
DO NOT OPEN
RISK OF ELECTRIC SHOCK

Document 800-08435 Rev A 3
04/11
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Accessing the OSD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Exposure Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Color Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Day&Night Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Motion Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Privacy Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sync Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Exit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4

Document 800-08435 Rev A 5
04/11
Introduction
This document provides instructions for configuring the HD4US(X) indoor/outdoor vandal-resistant mini-
dome camera. These instructions are intended for system installers, administrators, and operators.
Features
•PiximSeawolfsensor
•Highresolution
• Second video output
• DC varifocal lens (3.3–12 mm)
• Top-down OSD (on-screen display) control
• Wide voltage input operation [12V DC (10 V–16 V) / 24V AC (20 V–28 V)]
• Line lock mode (at 24 V AC)
•Heater
•UTPinterface
Before You Begin
Please read this guide carefully before you install your camera. Keep this guide for future reference.
Model Number Description
HD4US NTSC
HD4USX PAL

6

Document 800-08435 Rev A 7
04/11
Configuration
Accessing the OSD Menu
Press the OSD controller joystick to access the OSD menus.
Move the joystick in the desired direction to navigate through
menu options. Two dots (..) indicates that a submenu is
present. Press the joystick to enter or exit a submenu.
Monitor Out Connector (2nd Video)
Use the monitor out connector if you want to connect a
portable monitor to verify the view angle and change the
settings. An adapter cable is supplied.
Menu Structure
Monitor Out
OSD
Controller
EXP: Lens, AE Preference, BLC, WDR, AGC,
Sense-Up, Meter Zone
RGB: WB Mode, Color Gain
D&N: D&N Mode, Burst
FUN: Mirror, Sharpness, Gamma, 3D DNR,
D-Zoom
MOT: Motion, Motion Zone
PRI: Privacy Mask, Mask Color
SYC: Sync
SET: Title, Language, Fluorescent, Digital
Video Output
EXT: Exit, Save&Exit, Factory Set

8
Exposure Menu
Lens
Select DC as the lens mode. Enter the DC setup menu to focus the lens using the focus meter. The
maximum focus number corresponds to the best focus.
Note Only DC mode is supported at this time. Choosing MANUAL mode might cause
incorrect operation.
AE Preference
Select INDOOR or OUTDOOR as the automatic exposure preference.

Document 800-08435 Rev A 9
04/11
BLC (Backlight Compensation)
Backlight compensation prevents subjects in the center of the scene from appearing too dark when
backlighting is present.
Select ON or OFF. If ON is selected, enter the BLC setup menu to select the amount of backlight
compensation you want to use. Select a value from 10 to 50. The higher the number, the greater the
amount of backlight compensation.
WDR (Wide Dynamic Range)
Wide dynamic range provides clear, balanced images in high-contrast lighting conditions.
Select from LOW, NORMAL, MEDIUM, HIGH, or CUSTOM. If CUSTOM is selected, enter the auto
range menu to adjust the values for bias and limit.

10
AGC (Automatic Gain Control)
Automatic gain control adjusts the video signal strength to compensate for changes in light levels.
Select from LOW, MEDIUM, HIGH, or CUSTOM. If CUSTOM is selected, enter the AGC menu to
adjust the values for bias and limit.
Sense-Up
Sense-Up lets you adjust the frame integration to provide a clear image under low light conditions.
You can set the maximum frame integration from 2× (default) to 64×.