Honeywell HWC-D101 User manual

1
IP Flat Vandal-proof Dome Camera
HWC-D101
User Manual
Option: N(NTSC), P(PAL), T(TDN), I(IR-LED)
Overview
Accessories
Before installing and using the product,
please read this manual carefully.
Be sure to keep it handy for later reference.
The adaptor and LAN cable are sold separately.
•1/3” Sony Super HAD CCD
•Fixed Lens
•D1 resolution at 30FPS
•Multi-codec support : H.264 / MJPEG / MPEG-4
•Multi-stream with variable resolution & frame
- 1st stream : H.264 or MJPEG @ all resolutions
- 2nd stream : H.264 or MJPEG @ all resolutions
- 3rd stream : MPEG-4 @ QCIF resolution
•Stream based motion detection
•VBR / CBR support
•Two-way audio supported (Full Duplex)
•Multi-codec audio support : G.711 / G.726
•TDN (ICR, True Day&Night) - Option
•Power : DC 12V, PoE (IEEE 802.3af-compliant)
HWC-D101
(IR-LED option)
Quick Manual
Mounting Template

2
Precaution
WARNING
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS
■ Do not open or modify
Do not open the case, as it may be dangerous and cause damages.
■ Do not put objects inside the unit
Make sure that no metal objects or flammable substances get inside the camera. It could cause
fire, short-circuits or damages.
■ Be careful when handling the unit.
To prevent damage, do not drop the camera or subject it to strong shock or vibration.
■ Install away from electric or magnetic fields.
■ Protect from humidity, dust and high temperature.
An additional case that is temperature-controllable, damp-proof and waterproof is required for
outdoor use.
■ Cleaning
Dirt can be removed from the case only by wiping it with a soft cloth moistened with a soft
detergent solution.
■ Mounting Surface
The mounting surface material must be strong enough to support the camera.
■ HWC-D101 can be used for surveillance purpose.
Be thoroughly informed of related regulations prior to installation to ensure compliance with such
regulations .

3
Overview
Features
HWC-D101 is a network video server that transmits real-time high-resolution digital
video and audio data with H.264 high compression rate over Internet or Intranet.
Appearance
▶
Top
▶
Side
▶
Bottom
▶
Rear
Cable Hole
▶
Front
Cable Hole (Rubber Cover)
120mm
60mm
(Pad)

4
Overview
Dimensions
▶Side
▶Bottom

5
Connection
1. Remove the dome cover
After determining the place to be installed, remove the dome cover with the wrench in the
package.
(It is assumed that the power and network connector are installed.)
2. Connect the network
Connect the RJ45 jack from the network device to the Ethernet connector of the product.
(If the PoE device is used, confirm that the network devices and cables are the products by
IEE802.3af.)
3. Connect the power
Connect the power of a DC 12V 1A adaptor
(If a PoE device is used, it is not necessary to connect the power.)
4. Fix the product
Fix the product on the mounting surface after connecting the cables.
5. Setup an IP address
Refer to p.7~8 (Network)
6. Adjust the camera module
Adjust the direction of the camera module with monitoring the image
on the web monitoring page.
(The lens focus cannot be adjusted.)
7. Assemble the dome cover
Assemble the dome cover with the wrench and remove the vinyl on the cover.
▶
Fixing Hole
(Bottom)
Fixing Hole (4EA)

6
Internet
or
Intranet
Connection
Connection Example
REF Monitoring PC Requirements
Item
Specification
Monitoring
PC
Processor
Pentium Core2 Duo or more
RAM
2GB or more
Graphic Card
512MB or more
OS
Windows 2003 / XP / Vista / 7
Monitor Resolution
1024 X 768 pixels or more
Network
10/100 Base-T LAN
HWC-D101
···
·
1
2
N
POWER
HUB
Monitoring PC
Local Network
Public Network
LAN (UTP) Cable
LAN (UTP) Cable
LAN Cable
Router
Monitoring PC
POWER
POWER

7
Network
Setting an IP address
Change the network setting value with the program “NVTManagement”
1. NVTManagement execution
• Execute the file “NVTManagement.exe”
2. IP address set-up
• Click the button “NVT Scan”, select the model.
• Input the IP address, Subnet Mask, Gateway and DNS Server IP address, click the button
“Apply”
• If you don’t have a proper IP address, ask the network administrator.

8
Network
3. Accessing to HWC-D101 with a web browser
Open a web browser on a monitoring PC and enter the IP address assigned to an HWC-D101
as following
Example> http://192.168.1.2
• The page as below shows up after the connection is completed.
ID / Password :
root / pass (Initial Value)
Login button :
it enables you to move to the Web
Monitoring Page. On checking the
Setting box and clicking the button,
you can move to the Web Setting
Page.
Guest Login :
you can move to the Web
Monitoring Page as “guest”
Refer to the document “HWC-D101_Web_Manual.pdf” for the Web server.
< 초기 접속화면 >
< 영상 모니터링>
▶The Initial Page
▶Web Monitoring Page