Honeywell V-PLEX 5192SD User manual

The Honeywell 5192 Series low profile, addressable V-Plex
smoke detectors deliver state-of-the-art features and
benefits in a cost-effective package. These detectors are
designed to provide open area coverage and are
compatible with Honeywell’s VISTA controls supporting
V-Plex technology.
An LED on the detector will blink periodically during normal
conditions, remain on steady during alarm and cease to
pulse if the chamber is out of acceptable sensitivity range.
An extremely powerful feature available within the 5192
Series is the Automatic Maintenance Alert/Reporting
capability – a feature normally found in today’s high end
analog addressable systems. The detectors continually
monitor their own sensitivity levels in addition to the basic
normal and alarm conditions. These HIGH and LOW
SENSITIVITY signals are communicated back to the
control, via the V-Plex addressable loop, to indicate locally
and at the central station that the detector may not be able
to detect smoke or may false alarm. This feature works
with VISTA-32FB, 128BP, 128FBP, 250BP, 250FBP, 40,
50P, 100-24 and FAP FA1600C, FA1660C and FA1700C.
More important is the cost saving associated with
Automatic Maintenance Reporting. The feature is an
approved alternate to NFPA 72 field sensitivity calibration
testing that require external test meters. This eliminates the
need to schedule inspections to determine detector
sensitivity/viability. Another important benefit of these V-Plex
(addressable) smoke detectors is their ability to operate on
existing wiring.
There is no need to run special twisted pair, data grade or
shielded wires, providing you with the right choice for all
your retrofit applications. That equates to cost savings in
time and materials!
• Low profile design
• V-Plex addressable loop device
• Automatic maintenance reporting
• Available with integral heat sensor
• Simple 2 wire installation
• DIP switch or serial number
programmable
• Lines on existing or
conventional wiring
FEATURES
The 5192 Series smoke detectors are designed to provide open area coverage and are well suited for most fire detection
applications. These smoke detectors are compatible with all Honeywell VISTA Fire and Burglary controls that support V-Plex
addressable loop technology. These agency listed alarm initiating devices support most commercial and residential applications. They are
suited for use in museums, hospitals, day care centers, retail stores, strip malls, schools, libraries, fast food chains, medical or
professional office suites and in factory and warehouse environments.
APPLICATIONS
5192SD/5192SDT
V-PLEX®SMOKE DETECTOR

L/5192/D
May 2009
© 2009 Honeywell International Inc.
ORDERING
5192SD Addressable Photoelectric Smoke Detector
5192SDT Addressable Photoelectric Smoke Detector with Integral Heat Sensor
SPECIFICATIONS
5192SD/5192SDT
V-PLEX™ SMOKE DETECTOR
Installation
The 5192 Series smoke detectors are
supplied with a convenient mounting
bracket that allows the detector to
be mounted to a variety of electrical
junction boxes. A removable terminal
block, that accepts 14 to 22 gauge wire
to provide easy wiring connections. The
detectors are designed to meet
all applicable requirements for UL
Commercial and Residential Fire
installations as well as NFPA 72
requirements when installed in
compliance with the National
Electric Code and approved/listed control
panels.
CompatibilIty
These smoke detectors are compatible
with all VISTA control panels that support
V-Plex (addressable) polling
loop technology. The detectors support
DIP switch or serial number addressing.
DIP switch configuration are compatible
with 5140XM, VISTA-40, and
VISTA-50P controls.
Serial number addressing is supported on
VISTA-32FB, 128BP, 128FBP, 250BP,
250FBP, 100-24 and FAP FA1600C,
FA1660C and FA1700C controls. (Refer to
control panel and smoke detector
installation instructions for details.)
Automatic Maintenance
Reporting Compatibility
The automatic maintenance feature is
compatible with the following control
panels:
– VISTA-32FB
– VISTA-128BP
– VISTA-128FBP
– VISTA-250BP
– VISTA-250FBP
– FA1600C
– FA1660C
– FA1700C
The automatic maintenance may be
disabled for all other controls that
do not support this feature. Refer
to control panel and smoke detector
Installation Instructions for details.
Electrical:
• System voltage range: 7-14 V
Standby current (maximum @ 12V):
– LED off: 1.2mA
– LED on: 2.8mA
Mechanical:
• Diameter: 5.5 inches (140mm) (including
mounting bracket)
• Height: 1.7 inches (43mm)
(including mounting bracket)
• Weight: 5.3 ounces (150 grams)
Environmental:
• Installation temperature range:
32° to 100°F (0° to 38°C)
• Installation humidity range:
10% to 93% RH, non-condensing
• Heat sensor (5192SDT only):
135°F fixed temperature
electronic thermistor
• EMI: Meets or exceeds the
following requirements:
– FCC Part 15, Class B Device
– IEC EMC Directive
Agency Listings
• UL268 Commercial System
Smoke Detector
• Meets UL 217 Requirements
for Residential
VISTA SERIES UL LISTED
COMPATIBLE CONTROL PANEL
REMOVABLE
TERMINAL BLOCK
DIP
SWITCH
Wiring diagram for 5192SD/SDT smoke detector
For more information: www.honeywell.com/security/hsc
Automation and Control Solutions
Honeywell Security & Communications
2 Corporate Center Dr. Suite 100
Melville, NY 11747
1.800.467.5875
www.honeywell.com