Honeywell Series A User manual

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
START A SHIFT -PREPARE BELT
Honeywell A-series Mobile Devices
1. Open belt
2. Slide the holster onto the belt
3. Close belt
4. Put on belt
5. Slide device into holster
Release Velcro®
... and slide belt out of
buckle clip
Talkman A730 holster
OR
Talkman A710 or A720 holster
Feed belt back through buckle
... and close Velcro®
Release buckle,
wrap belt around waist
and click buckle ends together
Talkman A730
Align device slot runners with
holster and slide until click
Talkman A710 or A720
Adjust Velcro,
slide in device
and fasten Velcro
or

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
START A SHIFT -WIRELESS HEADSET
Honeywell A-series Mobile Devices - for personal electronic modules
1” (2cm) from
corner of mouth
solid green
8. Touch electronic module to device at symbol
6. Select device 7. Power on SRX2
9. Put on headset and position microphone

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
START A SHIFT -WIRELESS HEADSET
Honeywell A-series Mobile Devices - for shared electronic modules
1” (2cm) from
corner of mouth
solid green
9. Touch electronic module to device at symbol
10. Put on headset and position microphone
6. Select device 7. Power on SRX device
8. Touch headband to device at symbol

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
START A SHIFT -WIRED HEADSET
Honeywell A-series Mobile Devices
yellow
1” (2cm) from
corner of mouth
10. Tilt connector toward device until it clicks
8. Fasten cable clips
7. Put on headset and position microphone
6. Select device
9. Match port colors

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
START A SHIFT -SIGN ON
Honeywell A-series Mobile Devices
0, 1, 2, Ready.
Password? *****
*****
Correct? Yes.
Ready.
11. Power on device
12. Press Operator
13. Press Play/Pause
14. Do a noise sample
16. Say and confirm password
Confirm operator name
Power on device
IF NEEDED. Change operator
15. Confirm readiness
Press Operator button
Press Operator button
Press Operator button
Press + or - until “Change Operator”
Press + or - until you hear your name

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
ADJUST FEATURES
Honeywell A-series Mobile Devices
Change operator.
Change task.
Change pitch. Change speed. Change speaker.
1. Access the menu
2. Press + or - button until desired menu item
3. Press Operator button to select menu item
Press Operator button
TIP. Press the Play/Pause button at any time to cancel the action
5. Press Operator button to confirm
4. Press + or - button until feature is adjusted

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
device state indicator
small segment
green & pulsing:
sleeping
DEVICE STATE INDICATORS
Honeywell A-series Mobile Devices
small segment
green & solid:
on
small segment
yellow & pulsing:
no task loaded
entire ring
yellow & rotating:
loading or starting
entire ring
red & rotating:
loading software
or shutting down
device state indicator
1. Device state indicator - out of device charger
2. Device state indicator
- in device charger
3. TouchConfigTM
charging
charging complete
charging fault
small segment yellow & solid:
sender mode
large segment yellow & solid:
receiver mode
entire ring fast blink:
TouchConfig successful

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
CHANGE BATTERY
Honeywell A-series Mobile Devices
Push until it clicks
Green = fully charged
1. Slide battery release button away from battery
4. Pick charged battery
2. Lift out battery 3. Place in empty slot
5. Insert pins-end first

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
END A SHIFT -WIRED HEADSET
Honeywell A series Mobile Devices
Open Velcro®
and slide device out
Grasp connector,
tilt bottom of
connector away from
device and lift up
Press and hold Play/Pause
until LED rotates red
Insert device with button
controls facing out
and Operator button on top
Release buckle
7. Remove belt
3. Slide out holster 4. Insert into slot
1. Power off device 2. Remove connector
5. Detach cable clips 6. Remove headset

© Copyright 2020 Honeywell International, Inc. All rights reserved. Vocollect, Vocollect Voice, Talkman, and TouchCong are either
registered trademarks or trademarks of Vocollect. All other trademarks are property of their respective owners.
END A SHIFT -WIRELESS HEADSET
Honeywell A-series Mobile Devices
4. Power off headset
1. Power off device
2. Slide device out of holster
3. Insert into slot
5. Remove battery
7. Remove belt
A730
Pull device away from
you, sliding along clip
Insert device with button
controls facing out and
Operator button on top
6. Place in charger
A710 or A720
Open Velcro® and slide
device out
Press and hold
Play/Pause until
LED rotates red
Squeeze battery
release buttons
Release buckle
or