Honeywell T10 Pro Smart User manual

T10 Pro Smart thermostat with RedLINK
User Guide
Welcome
This user guide is designed to help you get acquanted with your new T10 Pro Smart thermostat with RedLINK. Check out the table of
contents on page 2 to browse by topic.
Need help? Get in touch.
WEB: honeywellhome.com
PHONE: 18006333991
SOCIAL: Twitter: @HoneywellHome, Facebook: Honeywell Home

33-00428–01 2
TABLE OF CONTENTS
Thermostat Features..........................................................................page 3
Thermostat overview..........................................................................page 4
Honeywell Home App overview .....................................................page 5
Basic thermostat operation
Main thermostat menu options ....................................................page 6
Using Priority for sensors ................................................................page 7
Selecting system mode.....................................................................page 8
Auto changeover mode.....................................................................page 9
Emergency heat mode ......................................................................page 9
Setting the fan................................................................................... page 10
Setting the Time/Date.................................................................... page 11
WiFi settings and connectivity
Connecting to a WiFi network ................................................... page 12
Disconnecting and reconnecting to a WiFi network........ page 13
Turning thermostat WiFi on and off ...................................... page 13
Scheduling options
Scheduling on thermostat............................................................ page 14
Scheduling on App....................................................................page 1516
Geofence and Smart scheduling ............................................... page 16
Schedule override on device........................................................ page 17
Setting Preferences (language, time/date, F/C, etc.) ....... page 18
Cleaning the display ....................................................................... page 19
Security settings ............................................................................... page 19
IAQ Control
Humidification settings................................................................. page 20
Dehumidification settings............................................................ page 21
Ventilation settings ......................................................................... page 22
Advanced features
Adaptive Intelligent Recovery...................................................... page 23
Compressor protection .................................................................. page 23
P + I control ......................................................................................... page 23
Alerts and notifications...........................................................page 2425
Maintenance reminders ................................................................ page 26
Identifying a wireless sensor ....................................................... page 27
Replace sensor batteries............................................................... page 28
Frequently Asked Questions (FAQs) ..................................page 2930
Troubleshooting................................................................................ page 31
Regulatory information.................................................................. page 32
Specifications .................................................................................... page 32
Warranty information ..................................................................... page 33

3 33-00428–01
Thermostat Features
Flexible scheduling: You can choose to use location-based temperature control (geofence technology), program a set schedule or
use a combination of both to make sure your home is always comfortable.
• Location-based temperature control: Using geofence technology, the T10 Pro Smart thermostat will automatically use
your smartphone’s location, which can save you energy when you leave and make your home comfortable by the time you
return.
• Smart Scheduling: Adds a Sleep period to location-based temperature control.
• Time-based scheduling: You can program a schedule where every day is different, a schedule where weekdays and
weekends are different or a schedule where every day is the same. There are four adjustable periods per day: Wake, Away,
Home, and Sleep.
• No schedule: You can also choose not to set a schedule and adjust the thermostat manually.
• You can also choose not to set a schedule and adjust the thermostat manually
• Schedule Using Sensors
• Up to 20 wireless indoor temperature/humidity/motion sensors per thermostat.
• Sensor Priority for each program period or when used manually.
Tip: The Honeywell Home app can be used to manage multiple thermostat and multiple users in a household.
!Smart Alerts: The T10 Pro Smart thermostat will send alerts for things like extreme indoor temperatures and reminders for
things like filter changes.
Auto change from heat to cool: When Auto mode is selected, the T10 Pro Smart thermostat can automatically determine
whether your home needs heating or cooling to reach the desired temperature.
Adaptive Intelligent Recovery: The T10 Pro Smart thermostat learns your heating and cooling cycle times to make sure the
system delivers the temperature you want, when you want it.

33-00428–01 4
Getting the most from the T10 Smart Thermostat
Prioritize Rooms
Prioritize a specific room or multiple rooms, or let comfort follow your move using built-in motion detection.
Control on the Go
Adjust your thermostat from anywhere using your tablet or smartphone.
Save Energy
With geofencing, you can save money on the most expensive part of your energy bill while you’re away.
Simple Installation
The thermostat automatically programs itself. Just answer a few simple questions and you’ll be up and running in no time.
WholeHome Range
With a 200-foot range, 20 sensors with temperature, humidity, and occupancy detection can connect to your thermostat from
throughout your home.
Know Your Home Is Safe
Get customizable alerts on your mobile device when the basement is so cold a pipe could burst, or if the baby’s room is getting
too hot.
Using Your Thermostat
The screen will wake up by pressing the center area of the displayed temperature.
74
2
18%
Indoor Temperature
Displays the current
indoor temperature.
Adjust Temperature
Touch the up and
down arrows to
set your desired
temperature.
Current Priority
Displays the type of
priority and number
of rooms being
prioritized.
Menu
Contains features
such as mode, fan,
schedule, priority,
and other thermostat
settings.
Indoor Humidity
Displays the current
indoor humidity.
Desired
Temperature
Displays the desired
temperature.

5 33-00428–01
Using the Honeywell Home App
Cha
nge System
Mo
de
Ch
ange Fan
Se
tting
Set Desired
Temperature
Set Sensor Priority
Change Schedule
Type
Access Menu
Options
Available options
shown in screens
below
Home Screen
Menu Options

33-00428–01 6
Main Menu on Thermostat
From Home Screen, press the menu icon at bottom of the
display (3 horizontal lines). If this is not shown at home
screen, touch screen to wake display first.
Main Menu options
System mode (Available modes vary depending on how the
thermostat was configured)
• Heat
• Off
• Cool
• Auto – Operation on page 9.
• Em Heat – Operation on page 9.
Fan (Fan setting not available for all system types)
• Auto (Fan only runs with a call for heat or cool, or if set to
run with Hum, Dehum, or Vent call)
• On (fan runs continous)
• Circulate (fan runs randomly approx. 33% of the time)
Priority
If wireless indoor temperature/humidity/motion sensors are
used, select which sensors are used for temperature control.
You can choose active sensor (ones detecting motion) or
manually select which sensors to use.
Schedule
• Create new schedule (Set a time-based schedule)
• Disable schedule
• Reset to default Schedule
NOTE: To enable geofencing, use the Honeywell Home app.
Management:
Devices & Sensors
• View the temperature and humidity reading from
individual sensors
• Identify a wireless indoor sensor
• Add a new wireless indoor sensor
• Remove a wireless indoor sensor
Thermostat information
• Mac Address
• IP Address
• Date Code
• Model Number
• Build Date
• Collection Version
• WiFi Bootloader Version
• WiFi Application Version
• RedLINK Application Version
Equipment Status
• System mode
• Heat stages (on or off)
• Cool stages (on or off)
• Fan on or off
• IAQ (Hum, Dehum, or Vent) on or off
Dealer Information
• Model number
• Date code
• Dealer company name and contact information if
provided by installer.
Configuration:
• WiFi
• Security
• Preferences
• Installer Options
Scroll down to see more options

7 33-00428–01
Selected Rooms
Rooms you manually select create an average
temperature in your home.
Unselected Room
Will not contribute to the average temperature.
Selected Room
Will contribute to the average temperature.
72 72
72 72
72 72
72 72
ProSeries
ProSeries
Active Rooms
Rooms with detected motion are automatically
selected to create an average temperature in
your home
.
Room without Activit
y
No motion is detected. Will not contribute to
the average temperature.
Room with Activit
y
Motion is detected. Will contribute to the
average temperature.

33-00428–01 8
Selecting system mode
Touch homescreen to wake the thermostat.
Touch the menu icon and then touch “Select Mode.”
• Heat: Controls the heating system.
• Cool: Controls the cooling system.
• Off: Turns the heating and cooling systems off.
• Auto: When enabled, the thermostat will automatically
use heating or cooling to reach the desired temperature.
Operation on page 9.
• Em Heat: Controls auxiliary or emergency heat; only
available on systems with a heat pump. Operation on
page 9.
Notes:
• All available modes may not be shown for some
applications. Scroll down to see more mode options (if
available).
• Auto mode may not appear on the thermostat screen or
in the app depending on your equipment, and how your
thermostat is configured.
• When Auto is selected, “Heat to” and “Cool to” will both
be shown from the “active” home screen.
• Em Heat is only available for heat pump systems. The
thermostat must also be configured to control a heat
pump and an auxiliary/emergency heat stage.
• When Auto is selected, “Heat to” and “Cool to” will both
be shown from the “active” home screen.

9 33-00428–01
Auto Changeover operation
Auto changeover is available if the thermostat is configured for at least 1 heat stage and 1 cool stage and the installer enabled
auto changeover.
When configured this way, you can select “Auto” as one of the options under “System mode”.
When in auto mode, the customer can always set the heat and cool setpoint to the same temperature, regardless of the
differential setting although most customer prefer to have a cool setpoint that is at least 3 degrees above the heat setpoint.
When configured for 0 differential by the installer, we enforce a 1.5°F differential behind the scenes to ensure the heat doesn’t
come on after cooling shuts off or vice-versa.
The differential is the minimum number of degrees the temperature needs to rise or fall before switching from heat to cool while
in auto changeover mode. Example: With a 3 degree differential, If heat and cool were both set for 70, and heat had been used
last, the temperature would need to rise at least 3 degrees above the heat setpoint before the thermostat would turn on cooling.
Then it would cycle cooling on and off to maintain setpoint and the temp would need to drop at least 3 degrees below the cool
setpoint before heat could come on.
If the AC is used for dehumidification then we enforce an additional temp drop below the overcooling amount, prior to switching
back to heat.
Em Heat mode
Emergency heat runs when you manually switch the thermostat to the em heat mode. When the thermostat is in emergency heat
mode, the heat pump is locked out. When the thermostat is set to em heat mode, the heat pump is locked out and the backup
heat is used to maintain the heat setpoint.
Emergency heat mode is only available when the thermostat was configured for a heat pump with Backup heat by the installer.
From home screen touch the menu icon and then “system Mode”. You can set the thermostat to heat, off, cool, emergency heat,
or auto (auto only available if configured by installer).

33-00428–01 10
Setting the Fan
Note: Fan setting not available for all system types.
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Touch Fan
Choose on, auto, or circulate.
Touch arrow in upper left to return to previous screen.
Auto setting only runs the fan with the heating or cooling
system.*
On setting runs the fan continuously.
Circ setting runs the fan approx 33% of the time to ensure air
circulation.
* The fan may also run with the humidifier, humidifier, or
ventilator depending on how the thermostat was configured.
Scheduling the Fan
You can set the fan to on, auto, or circ for each program when
using time-based scheduling or geofencing.

11 33-00428–01
Setting the Time/Date
When the thermostat is linked to the home WiFi router and
registered to an account using the Honeywell Home app, the
date and time will update automatically.
If not using WiFi you can set the time/date as follows:
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select “Preferences”.
4. Select “Date and Time”.
5. Date and time information are displayed.
Set date
• If the date shown is incorrect, touch “date”.
• Scroll up or down on the left of the display until the
correct month is in the middle of screen.
• Scroll up or down on the center of the display until the
correct day is in the middle of screen.
• Scroll up or down on the right of the display until the
correct year is in the middle of screen.
• Touch “Done”.
Set time
• If the time shown is incorrect, touch “time”.
• Scroll up or down on the left of the display until the
current hour is in the middle of screen.
• Scroll up or down on the center of the display until the
current minutes are in the middle of screen.
• Scroll up or down on the right of the display until the
correct am or pm is in the middle of screen.
• Touch “Done”.
After touching “Done”. Use the arrow at the top of the display
to return to the previous menu. To return to home screen from
main menu, press the arrow at top center of display.

33-00428–01 12
Connect to WiFi
1. Open the Menu
2. Scroll to and select “WiFi”
3. Tap “Choose Network”
4. Select a network
1 2
Wi-Fi
3
Choose
Network
4
Connect to the Honeywell Home App
1. Open the Menu
2. Tap “Connect App”
3. Follow the on-screen instructions
1 2
Connect
App
3
1. Select thermostat model
2. Select location where the thermostat is installed or create a new location.

13 33-00428–01
Enabling or disabling WiFi and
Disconnecting and reconnecting to a
WiFi network
On thermostat
Enable WiFi
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select “WiFi”
4. Verify “Enable” is selected.
Connecting to a WiFi network
1. Verify WiFi is enabled using steps above.
2. Touch “Choose network”
3. Select the network you wish to connect to from the list and
enter the password.
Disable WiFi
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select “WiFi”
4. Verify “Enable” is de-selected.
Disconnecting from a WiFi network
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select “WiFi”.
4. Touch “Choose network”
5. Select the network you wish to connect to from the list and
enter the password.

33-00428–01 14
Setting a schedule on thermostat
Select the menu icon at the bottom of the homescreen
display. Then select Schedule.
• If you want all days the same, select “grouped days.”
• Touch the period you wish to edit (Wake, Away, Home, or
sleep).
• If you want all days separate, select “Single days.”
• Touch the period of the day you wish to edit (Wake, Away,
Home, or sleep). Scroll down to see additional days).
• If you want weekdays grouped but weekend days
separate, or if you do not want to use a schedule, select
“Schedule
• Touch “create new schedule”. The thermostat will then
walk you through the schedule setup.
• Touch “Time” to edit the time for that schedule period.
• Touch “priority” to select which sensors will be used for
that period.
• Touch “Temperature” to set the heat and cool setpoints
for that period.
• Touch “Fan” to select fan on, auto, or circ for that period
(See page 10).
NOTE: to utilize Geofencing, set the schedule through the app

15 33-00428–01
Scheduling through the app
Flexible scheduling: You can choose to use location-based temperature
control (geofence technology), time-based scheduling, or use a combination
of both to make sure your home is always comfortable.
• Location-based temperature control: Using geofencing technology,
the T10 Pro Smart thermostat will automatically use your smartphone’s
location, which can save energy when you leave and make your home
comfortable by the time you return.
• Smart scheduling: Adds a Sleep period to location-based temperature
control.
• Time-based scheduling: You can program a schedule where every day
is different, a schedule where weekdays and weekends are different, or a
schedule where every day is the same. There are four adjustable periods
per day: Wake, Away, Home, and Sleep.
• No schedule: You can also choose not to set a schedule and adjust the
thermostat manually.
• Sensor Priority: Select which sensors are used for each program period
or when used manually.
1. In the Honeywell Home app, select the thermostat you wish to schedule.
Touch the calendar icon in the lower right of the display
2. Select Grouped days for all days the same or Single day if you want some
days to be scheduled different than others.

33-00428–01 16
Scheduling through the app (continued)
1. Select “Options” to turn schedule off, create a new time-based
schedule, or switch to Geofencing.
2. Set priority sensor(s) for each program.
When location-based temperature control is used, the thermostat active
homescreen display will show ”Using Home settings”, “Using Away
Settings” or “Using “sleep settings” below the room temperature. If you set
an additional Sleep period in the Honeywell Home app, you’ll also see the
Following Schedule in the upper left corner of the thermostat screen.
If you manually change the temperature when location-based temperature
control is active, the new temperature will remain in effect until you cross
the geofence.
To adjust the geofence boundary, follow the steps below.
1. Open the Honeywell Home app, tap the menu icon in the upper left
corner and then tap Geofence.
2. Tap Geofence Radius, and when the map and current geofence appear,
touch, hold and drag the black dot to adjust the geofence boundary.
3. Tap SAVE to finish.

17 33-00428–01
Schedule override on Device
With thermostat in heat, cool, auto, or em heat mode, press the up or down arrow to change the setpoint. (if thermostat is in auto
mode, you need to press “heat to” or “cool to” first).
If scheduling is enabled it will say “Hold until” and show a time at the bottom of the screen. Touch this.
Display says “Use current temperature, fan, and comfort priority settings until…”
Options are:
• Next Period
• A Specific Time
• Permanently
• Remove hold
Choose the appropriate option. If you chose “A Specific time” Select the time you want to hold to.
Press “Done” to return to Home screen.

33-00428–01 18
Setting Preferences
Preference menu options let you select how the thermostat
displays information or responds to certain situations.
To access the Preferences menu:
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select “preferences”.
Select an option and follow prompts:
Display
• Temperature units (Fahrenheit or Celsius)
• Language (English French or Spanish)
• Idle Screen Style (Temperature or Analog Clock)
• Inactive backlight setting (0% to 100%)
• Inactive Sleep backlight setting (0% to 100% and
inactive sleep time settings. Note: these can be set
different than the schedule sleep times)
• Indoor display offsets (temperature and humidity)
• Clean screen (allows you 30 seconds to clean display
without accidently adjusting a setting)
Date and Time
• Set date
• Set time
• Set to 12 or 24 hour clock
• Set for daylight savings time
Reminders (these vary based on ISU settings)
• Air Filter 1
• Air Filter 2
• Electronic Air Cleaner PreFilter
• Electronic Air Cleaner PostFilter
• Humidifier Tank / Water Filter
• Humidifier Pad
• Dehumidifier Filter
• Ventilator Core
• Ventilator Filter
• UV Bulb 1
• UV Bulb 2
Adaptive recovery
• On or Off
Touch Done to save your settings.
Idle Screen Style - Analog clock
Idle Screen Style - Temperature

19 33-00428–01
Cleaning the Thermostat Screen
When you select the Clean Screen option, the screen is locked
to prevent accidental changes to the thermostat while you
clean the screen.
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select “Preferences”.
4. Select “Display”.
5. Select “Clean Screen”
A prompt asks if you want to clean the screen for 30 seconds.
6. Touch Yes. A countdown timer displays elapsed time until
the screen is reactivated.
NOTE: Do NOT spray any liquid directly on the thermostat.
Spray liquids onto cloth, then use the damp cloth to clean the
screen. Use water or household glass cleaner. Avoid abrasive
cleansers.
Adjusting Security Settings
You can adjust security options to prevent unauthorized
changes to system settings.
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Scroll down and select Security.
4. Select “Change lock mode” or “create password”.
Lock mode options
• Unlocked: Full access allowed.
• Partially locked: Only temperature can be changed.
• Fully locked: No access allowed.
NOTE: If you choose to create a password for additional
security, write it down for reference.

33-00428–01 20
Indoor Air Quality control
Humidification
The thermostat reads the indoor humidity level and allows the user to set a humidification setting with or without window
protection.
Control Humidification Level
1. Touch any part of the display to wake the thermostat.
2. Touch the MENU icon at the bottom of the screen.
3. Select Humidification.
4. Touch ^ or v to select humidity level.
5. Touch Done to save your settings.
6. If frost or condensation appears on the windows, press MENU, scroll down and select “options”. Then select “Window
Protection Level.”
Window Protection is set on a scale from 110. A setting of 1 represents poorly insulated windows and a setting of 10 represents
well insulated windows. A lower number automatically reduces the humidity to help prevent frost or condensation on your
windows. Use a higher number if indoor air seems too dry. To prevent frost/condensation on your windows during cold outdoor
temperatures, poorly insulated windows require a lower Window Protection setting, which will limit how much your humidifier
can run.
7. After you set the Window Protection setting, check for frost/condensation on your windows in the morning. If frost/
condensation is present, adjust the Window Protection setting to the next lowest number and check for frost/condensation on
your windows the next morning. Continue to adjust the Window Protection setting to a lower number until frost/condensation
is no longer present.
NOTE: Window Protection option is only available if a wired outdoor sensor or Internet is used to provide outdoor temperature
and the installer configured the thermostat for window protection on.
Window Protection
Window Protection limits the amount of humidity to prevent frost or condensation on windows. Window Protection requires
either an outdoor sensor or use of Internet weather. The thermostat prevents frost or condensation on windows by not allowing
the humidifier to run above a certain level. To prevent frost or condensation, the thermostat may turn off the humidifier before
the humidity setting is reached.
If Window protection is enabled by the installer, you can adjust this setting by pressing MENU, then scroll down and select
HumidificationOptionsWindow Protection Level. Window Protection is set on a scale from 110. A setting of “1” represents
poorly insulated windows and a setting of “10” represents well insulated windows. A lower number automatically reduces the
humidity to help prevent frost or condensation on your windows. Use a higher number if indoor air seems too dry. To prevent
frost/condensation on your windows during cold outdoor temperatures, poorly insulated windows require a lower Window
Protection setting, which will limit how much your humidifier can run.
After you set the Window Protection setting, check for frost/condensation on your windows in the morning. If frost/condensation
is present, adjust the Window Protection setting to the next lowest number and check for frost/condensation on your windows
the next morning.
Continue to adjust the Window Protection setting to a lower number until frost/condensation is no longer present If Window
Protection is turned Off, the thermostat controls the humidity level to the user’s desired humidity setting. Frost or condensation
may appear on windows.