Honeywell oneWireless XYR 6000 User manual

Honeywell Process Solutions
OneWireless XYR 6000 Transmitter
Professional Installation Guide
34-XY-25-47
Revision 3
September 2012

ii OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
Notices and Trademarks
Copyright 2012 by Honeywell International Inc.
Revision 3, September 2012
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied
warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may
be stated in its written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and
specifications in this document are subject to change without notice.
Honeywell, PlantScape, Experion PKS, and TotalPlant are registered trademarks of Honeywell International Inc.
Other brand or product names are trademarks of their respective owners.
Honeywell Process Solutions
1860 West Rose Garden Lane
Phoenix, Arizona 85027

iii OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
About This Document
This document outlines professional installation requirements for the Honeywell XYR 6000 Transmitter
for the Honeywell OneWireless Network. Professional installation is required to comply with certification
agency and legal requirements. This document must be adhered to for all installations of the Honeywell
OneWireless XYR 6000 Transmitters.
Honeywell does not recommend using devices for critical control where there is a single point of failure or where
single points of failure result in unsafe conditions. OneWireless is targeted at open loop control, supervisory
control, and controls that do not have environmental or safety consequences. As with any process control solution,
the end-user must weigh the risks and benefits to determine if the products used are the right match for the
application based on security, safety, and performance. Additionally, it is up to the end-user to ensure that the
control strategy sheds to a safe operating condition if any crucial segment of the control solution fails.
Revision Information
Document Name
OneWireless XYR 6000 Transmitter Professional Installation
Guide
Document ID
34-XY-25-47
Revision Number
Publication Date
New Revision 1 January 2011
ANATEL and INMETRO certificates added Revision 2 January 2012
Korea certificate added, adjusted TX power settings for
Australia Revision 3 September 2012
References
The following list identifies all documents that may be sources of reference for material discussed in this publication.
Document Title
XYR 6000 Transmitters Quick Start Guide 34-XY-25-21
Getting Started with Honeywell OneWireless Solutions OW-CDX010

References
iv OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
Support and contact info
United States and Canada
Contact: Honeywell Process Solution
•Global Technical Support - Phone: [phone]
•Customer Service (HFS) - Phone: [phone]
•Outside United States - Phone: [phone]
Calls are answered by dispatcher between 6:00 am and 4:00 pm Mountain Standard
Time. Emergency calls outside normal working hours are received by an answering
service and returned within one hour.
Email support: [email protected]
Mail: Honeywell Process Solutions
1860 West Rose Garden Lane,
Phoenix, AZ, 85027
For more contact details for Europe, Asia, North and South Americas, please see back page.
World Wide Web
Honeywell Solution Support Online:
www.honeywellprocess.com
Elsewhere
Call your nearest Honeywell office. See back page for details.
Training Classes
Honeywell Automation College:
http://www.automationcollege.com

Symbol Definitions
Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide v
September 2012
Symbol Definitions
The following table lists those symbols used in this document to denote certain conditions.
Symbol Definition
ATTENTION: Identifies information that requires special consideration.
TIP: Identifies advice or hints for the user, often in terms of performing a task.
CAUTION Indicates a situation which, if not avoided, may result in equipment or work (data) on
the system being damaged or lost, or may result in the inability to properly operate
the process.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe
practices.
CAUTION symbol on the equipment refers the user to the product manual for
additional information. The symbol appears next to required information in the
manual.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could
result in serious injury or death.
WARNING symbol on the equipment refers the user to the product manual for
additional information. The symbol appears next to required information in the
manual.
WARNING, Risk of electrical shock: Potential shock hazard where HAZARDOUS
LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60 VDC may be accessible.
ESD HAZARD: Danger of an electro-static discharge to which equipment may be
sensitive. Observe precautions for handling electrostatic sensitive devices.
Protective Earth (PE) terminal: Provided for connection of the protective earth
(green or green/yellow) supply system conductor.
Functional earth terminal: Used for non-safety purposes such as noise immunity
improvement. NOTE: This connection shall be bonded to Protective Earth at the
source of supply in accordance with national local electrical code requirements.
Earth Ground:Functional earth connection. NOTE: This connection shall be
bonded to Protective Earth at the source of supply in accordance with national and
local electrical code requirements.
Chassis Ground: Identifies a connection to the chassis or frame of the equipment
shall be bonded to Protective Earth at the source of supply in accordance with
national and local electrical code requirements.
continued

Symbol Definitions
vi OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
Symbol Description
The Factory Mutual®Approval mark means the equipment has
been rigorously tested and certified to be reliable.
The Canadian Standards mark means the equipment has been
tested and meets applicable standards for safety and/or
performance.
The Ex mark means the equipment complies with the requirements
of the European standards that are harmonized with the 94/9/EC
Directive (ATEX Directive, named after the French "ATmosphere
EXplosible").
For radio equipment used in the European Union in accordance
with the R&TTE Directive the CE Mark and the notified body (NB)
identification number is used when the NB is involved in the
conformity assessment procedure. The alert sign must be used
when a restriction on use (output power limit by a country at certain
frequencies) applies to the equipment and must follow the CE
marking.
The C-Tick mark is a certification trade mark registered to ACMA
(Australian Communications and Media Authority) in Australia under
the Trade Marks Act 1995 and to RSM in New Zealand under
section 47 of the NZ Trade Marks Act. The mark is only to be used
in accordance with conditions laid down by ACMA and RSM. This
mark is equal to the CE Mark used in the European Union.
N314 directly under the logo is Honeywell’s unique supplier
identification number.
The ANATEL mark is certification trade mark registered to the
Brazilian Agency of Telecommunications (in Portuguese, Agência
Nacional de Telecomunicações - Anatel). Anatel is a special
authority created by the general telecommunications law (Act 9472,
16/07/1997) in 1997 and regulated by the decree 2338, 07/10/1997.
The INMETRO mark is a certification trade mark registered to the
National Institute of Metrology, Standardization and Industrial
Quality (INMETRO). INMETRO is a Brazilian federal autarchy,
linked to MDIC, the Ministry of Development, Industry and Foreign
Commerce. INMETRO was created by Brazilian Law 5966, of 11 of
December 1973.

Symbol Definitions
Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide vii
September 2012
Contents
Support and contact info........................................................................................................................iv
1. DESIGNATION, SCOPE AND PREFACE .............................................................1
1.1 Designation....................................................................................................................................1
1.2 Scope..............................................................................................................................................2
1.3 Preface ...........................................................................................................................................2
1.4 Site survey.....................................................................................................................................2
1.5 Abbreviations & Definitions.........................................................................................................3
2. FEDERAL COMMUNICATION COMMISSION (FCC) ...........................................5
2.1 FCC Compliance Statement.........................................................................................................5
2.2 Industry Canada (IC).....................................................................................................................5
2.2.1 IC Compliance Statements.....................................................................................................................5
2.2.2 RF Safety Statement ..............................................................................................................................5
2.3 FCC and Industry Canada (IC) Identification Numbers.............................................................6
2.3.1 FHSS Radios..........................................................................................................................................6
2.3.2 DSSS and ISA100 Radios......................................................................................................................6
2.4 Japan MIC Identification and Certification Numbers.................................................................7
2.4.1 DSSS and ISA100 Radios......................................................................................................................7
2.5 Brazil Anatel Identification Number ............................................................................................7
2.5.1 DSSS and ISA100 Radios......................................................................................................................7
2.6 Intended Country Usage...............................................................................................................7
2.6.1 NORTH AMERICA .................................................................................................................................7
2.6.2 ASIA PACIFIC........................................................................................................................................7
2.6.3 EUROPEAN UNION...............................................................................................................................8
2.6.4 MIDDLE EAST........................................................................................................................................8
2.6.5 Central and South America.....................................................................................................................8
3. XYR 6000 TRANSMITTER GENERAL DESCRIPTION.........................................9
3.1 Intended Used................................................................................................................................9
3.2 XYR 6000 Transmitter Diagrams..................................................................................................9

Contents
Symbol Definitions
viii OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
4. PRODUCT SPECIFICATION...............................................................................10
4.1 Frequency Hopping Spread Spectrum (FHSS) Radio, 2.4 GHz..............................................10
4.2 Direct Sequence Spread Spectrum (DSSS) and ISA100 Radio, 2.4 GHz..............................11
4.3 Direct Sequence Spread Spectrum (DSSS) Radio for Kuwait Oil Company Applications,
2.4 GHz....................................................................................................................................................11
4.4 XYR 6000 Transmitter User Environment.................................................................................12
4.5 XYR 6000 Instrument Power Specifications.............................................................................12
4.6 Weight ..........................................................................................................................................12
4.7 Dimensions..................................................................................................................................13
5. CABLES...............................................................................................................14
5.1 XYR 6000 Transmitter with RP-TNC Connectors Antenna or Lightning Arrestor Cables...14
5.2 XYR 6000 Transmitter with N Connectors Antenna or Lightning Arrestor Cables..............14
5.3 Transmitter connection status...................................................................................................15
5.4 Antenna Lightning Arrestors In PV display..............................................................................15
6. APPROVED ANTENNA TYPES/GAINS..............................................................16
6.1 Antenna Details...........................................................................................................................16
7. EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP)...........................18
7.1 EIRP LIMITS.................................................................................................................................19
8. SETTING TX POWER..........................................................................................25
8.1 TX Power Setting.........................................................................................................................25
9. AGENCY LABEL INFORMATION.......................................................................26
9.1 External FCC/IC Labels...............................................................................................................26
9.1.1 50016195-001 – Transmitters with FHSS Radios..............................................................................26
9.1.2 50016195-002 – Transmitters with Intrinsically Safe FSSS Radios ...................................................26
9.2 Internal FCC/IC Labels................................................................................................................27
9.3 Internal Japan Ministry of Internal Affairs and Communications Label................................27
9.4 External Brazil Anatel Label.......................................................................................................27

Contents
Symbol Definitions
Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide ix
September 2012
10. RF SAFETY, MAXIMUM PERMISSIBLE EXPOSURE (MPE) STATEMENT......28
10.1 MPE Statement.........................................................................................................................28
11. AGENCY COMPLIANCE.....................................................................................29
11.1 Radio and EMC Certifications................................................................................................29
11.1.1 Federal Communication Commission (FCC)........................................................................................29
11.1.2 Industry Canada (IC) ............................................................................................................................29
11.1.3 European Telecommunications Standards Institute (ETSI)..................................................................29
11.1.4 Australian communications and media authority (ACMA).....................................................................29
11.1.5 Thailand National Telecommunications Commission (TNTC) ..............................................................29
11.1.6 Japan Ministry of Internal Affairs and Communications (MIC)..............................................................29
11.1.7 Kuwait Ministry of Communications (KMOC)........................................................................................29
11.1.8 Brazil Anatel .........................................................................................................................................30
11.2 Product Safety Agency Certifications...................................................................................30
11.2.1 Canadian Standards Association (CSA)...............................................................................................30
11.2.2 Factory Mutual (FM).............................................................................................................................30
11.2.3 European ATEX Certification (ATEX)...................................................................................................31
11.2.4 European Union Certification (CE-mark) ..............................................................................................31
11.2.5 Japan Technology Institution of Industrial Safety (TIIS) Certification....................................................31
12. REFERENCE DOCUMENTS ...............................................................................32
12.1 OneWireless reference documentation.................................................................................32

Contents
Tables
x OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
Tables
Table 1-1 – XYR 6000 Transmitter Types.....................................................................................................1
Table 1-2 –Table of Abbreviations and Definitions........................................................................................3
Table 4-1 Specifications of FHSS Radio Module in XYR 6000 Transmitter................................................10
Table 4-2 Specifications of DSSS and ISA100 Radio Module in XYR 6000 Transmitter ...........................11
Table 4-3 Specifications of DSSS Radio Module in XYR 6000 Transmitter for KOC Applications.............12
Table 4-4 User Environment Specifications for XYR 6000 Transmitter......................................................12
Table 5-1 Transmitter toAntenna or Lightning Arrestor Cable Specifications for XYR 6000 with RP-TNC
connectors............................................................................................................................................14
Table 5-2 Transmitter to Antenna or Lightning Arrestor Cable Specifications for XYR 6000 with N
connectors............................................................................................................................................14
Table 6-1 Approved Antenna Types/Gains .................................................................................................16
Table 7-1 Maximum EIRP Limits for FHSS Radios.....................................................................................19
Table 7-2 Maximum EIRP Limits for DSSS and ISA100 Radios.................................................................20
Table 7-3 FHSS Transmit Power Settings for the antennas and cable lengths specified above for FCC,
IC, ETSI, ACMA and TNTC approvals.................................................................................................22
Table 7-4 DSSS and ISA100 Transmit Power Settings for the antennas and cable lengths specified
above for FCC, IC, ETSI, ACMA, MIC, KMOC and TNTC approvals..................................................23
Table 12-1 – Reference documents............................................................................................................32
Figures
Figure 3-1 XYR 6000 Transmitters showing Right-angle -2 dBi Integral Antenna (left), Straight Integral -2
dBi Antenna (center) and Remote Antenna connector (right) options...................................................9
Figure 4-1 Dimensions of a typical XYR 6000 Transmitter with the Right-angle -2 dBi Integral Antenna
Option...................................................................................................................................................13
Figure 6-1 Comparison of instruments with -2 dBi Integral Antenna (left) and 4 dBi Integral Antenna.......17
Figure 6-2 Remote Antennas.......................................................................................................................17