Honeywell ULTAMAX PRO FC20 User manual
Cordless Floor Cleaner
User Manual
Read and save these instructions before use
Model number
FC20 ULTAMAX PRO
If you have any questions about the operation of this
product, please call us toll-free at 1-800-281-1378 or
EN | 2 EN | 3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed,
including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• This appliance has been designed
for household use only, and not for
commercial or rental services.
• This appliance must only be used in
accordance with these instructions.
The manufacturer will not be held
responsible for any damage caused by
improper or misuse of the appliance.
• The appliance is only to be used with
the power supply unit provided with the
appliance.
• If the battery pack needs to be
replaced, please only use authorized
Honeywell brand battery packs. Please
Email: [email protected].
• Check that the voltage marked on the
rating label matches your residence
voltage.
• To remove battery, please make
sure appliance is turned off and
disconnected from the charger.
• The battery is to be disposed of safely.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• Turn OFF all controls before plugging
or unplugging charger.
• Use extra care when cleaning on stairs.
• DO NOT use appliance in an enclosed
space filled with vapors given off by
oil-based paint, paint thinner, some
moth-proofing substances, flammable
dust, or other explosive or toxic vapors.
• Always Turn OFF this appliance before
connecting or disconnecting the
motorized roller nozzle or any other tool
or attachment.
• DO NOT incinerate the appliance even
if it severely damaged. The batteries
can explode in a fire.
• DO NOT pick up anything that is
burning or smoking, such as cigarettes,
matches or hot ashes.
• Turn OFF all controls, including
the power switch and disconnect
charger from electrical outlet, and
remove the battery before making
any adjustments, performing
maintenance, troubleshooting,
changing accessories or storing
appliance. Such preventative safety
measures reduce the risk of starting
the appliance accidentally, damage or
injury.
• Risk of injury from moving parts. Brush
may start unexpectedly. Turn OFF
before cleaning or servicing.
• DO NOT switch the appliance on if it
can be detected that it is not operating
correctly or if it has suffered any type of
damage.
• DO NOT attempt to repair this product
yourself.
• DO NOT use with a damaged main
power cable or plug. If the main power
cable is damaged it must be replaced
by manufacturer, its service agent or
similarly qualified person in order to
avoid a hazard.
• Any type of repair work other than that
stated in “Cleaning & Maintenance”
must be done by a manufacturer
service technician or an authorized
repair center.
EN | 3
IMPORTANT SAFETY INSTRUCTIONS
(CONTINUED)
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by
a person responsible for their safety.
Keep children and pets away from
the appliance. Children should be
supervised to ensure that they do not
play with the appliance.
Caution for Operation & Vacuuming
• Empty the appliance after each
use. Keep it free of dust, lint, hair, or
anything that reduces airflow. Please
store carefully.
• DO NOT allow to be used as a toy.
Close attention is necessary when used
by or near children or pets.
• DO NOT use for any purpose other
than described in this user manual.
Use only manufacturer’s recommended
attachments and/or replacement parts.
• DO NOT use appliance that is
damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
• DO NOT expose battery pack
or appliance to fire or excessive
temperature. Exposure to fire or
temperature above 130°C/265°F may
cause explosion.
• Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
• DO NOT modify or attempt to repair
the appliance except as indicated in
the instructions for use or care.
• Follow all charging instructions and
do not charge the appliance outside
of the temperature range specified
in the instructions. Charging
improperly or at temperatures
outside of the specified range may
damage the battery and increase
the risk of fire. Once fully charged,
please fully disconnect from charger
cable.
• DO NOT use wet hands when handling
the appliance or plug.
• Turn off and unplug the machine
before checking for blockages. Always
keep the openings clear and prevent
dust or dirt from blocking the air
passage.
• NEVER use the appliance without the
filter or dust cup in place.
• DO NOT dismantle the appliance while
the motor is still operating.
• DO NOT touch the rotating parts of
power brush when in operation.
• DO NOT use with damaged cord or
plug. If appliance is not working as it
should, has been dropped, damaged,
left outdoors, or dropped into water,
return it to a service center.
• NEVER leave the appliance
unattended while it is running.
• DO NOT unplug charger by pulling on
cord. Unplug the charger by grasping
the charger plug, not the cord.
• DO NOT use floor cleaner to pick up
flammable materials such as gasoline,
kerosene, lighter fluid, etc.
• DO NOT use floor cleaner to pick up
toxic materials such as detergent,
bleach, ammonia, solvents, acids, or
flammable liquids. etc.
EN | 4 EN | 5
• DO NOT use floor cleaner to pick up
sharp or hard objects such as broken
glass, nails, screws, coins, etc.
• DO NOT use floor cleaner to pick up
cement, gypsum powder, wall powder
and other powder or small particles, or
large objects that may cause vacuum
blockage and motor burn out.
• DO NOT use floor cleaner to pick up
anything that may still be burning such
as cigarette butts or ash/cinders.
• Keep the plastic film away from
children to avoid danger of suffocation.
• DO NOT rinse the roller brush and floor
brush assembly separately after the
roller brush is removed.
• DO NOT leave appliance when plugged
in. Unplug from outlet when not in use
or before servicing.
• DO NOT drag the cable or move the
product by the cable, nor use the cable
as a handle
• Use indoor only during charging and
cleaning mode.
Caution for Li-ion batteries
• This product includes rechargeable
Li-ion batteries. DO NOT disassemble,
short circuit, apply heat, drop or strike
the batteries, as they can cause electric
shock or explode.
• If the battery is used incorrectly, liquid
may leak out of the battery. AVOID
touching the liquid. In the event of
accidental contact, rinse the affected
area with water. If the liquid comes into
contact with the eyes, seek medical
assistance. If battery liquid leaks, it can
irritate or burn the skin.
• Recharge appliance only with the
charger specified below in this
manual. A charger that is suitable for
one type of battery pack may create
a risk of fire when used with another
battery pack.
• For use only with Kingclean model
T-DC60-SAM battery and E-TEK
charger model ZD024M342100US.
• DO NOT incinerate the appliance even
if it is severely damaged. The batteries
can explode in a fire.
• Keep batteries out of reach of children.
• The battery must be removed from the
appliance before it is scrapped.
• When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws,
or other small metal objects, that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
• Do not use a battery pack or appliance
that is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
Transportation information
• The Li-ion batteries in the appliance
are subject to the requirements of
dangerous goods legislation. The
batteries can be transported by the
user by road without any further
requirements. In the event that they
are shipped by a third party (e.g.
transported by air or freight carrier),
special requirements regarding
packaging and identification must
be met. In this case, a dangerous
goods expert must be consulted when
preparing the goods for dispatch.
IMPORTANT SAFETY INSTRUCTIONS
(CONTINUED)
EN | 5
Disposal information
• The appliance, batteries, accessories
and packaging should be recycled
in an environmentally responsible
manner.
• DO NOT dispose of the appliance or
the batteries along with your normal
household waste.
Packaging
• The packaging is designed to protect
the appliance from being damaged in
transit. Dispose of packaging that is
no longer required at an appropriate
recycling point.
• Please dispose of all packing material
in a safe and environmentally friendly
manner.
Old appliance
• Old appliances often still contain
valuable materials. You should
therefore take appliances that have
reached the end of their service life
to your dealer or a recycling center so
that they can be recycled.
• Ask your dealer or your local council
about current disposal methods.
• This product can be applied on hard
floors in the indoor environment,
including waxed floors, rubber floors,
marble floors, granite floors, seamless
wood floors, solid wood floors and
various ceramic tiles. If the surface is
uneven, the best results may not be
achieved.
• When the machine does not start,
please do not shake or bump the
machine up and down to prevent dirty
water from flowing into the motor;
when the machine is started, please
do not lift or carry the machine up
and down, nor tilt the machine to
one side nor lay it flat on the floor to
prevent dirty water from flowing into
the motor.
• Always clean out the dirty water tank
after each use to keep the machine
performing well.
• Do not use the machine if the dirty
water tank and the clean water tank
are not installed properly.
• After using the machine, clean the
dirty water tank, the suction nozzle,
then air duct before storing in a cool,
dry place.
Notes on Cleaning Solution
1) If a large amount of cleaning
solution enters the motor, this
may affect the performance of the
appliance.
2) Please follow the instructions on
the user guide (the ratio of the
cleaning solution to the water
is 1:40, about a 2.5 bottle cap
of cleaning solution) to prepare
the cleaning solution. It is
recommended to use the cleaning
solution produced by the company
and the manufacturer approved
by the company, and it must
not contain acid, alkali solution
or substances harmful to the
environment.
3) The cleaning solution should be
kept in a well-ventilated place
to avoid sunlight and in a place
where children can’t reach. If the
cleaning solution accidentally
gets into the eyes, it should be
rinsed thoroughly with clean water
IMPORTANT SAFETY INSTRUCTIONS
(CONTINUED)
EN | 6 EN | 7
IMPORTANT SAFETY INSTRUCTIONS
(CONTINUED)
immediately. In case of accidental
ingestion, seek medical attention
immediately.
4) When disposing waste from dirty
water tank and the cleaning
solution from clean water tank,
please follow current environmental
protection requirements for proper
disposal.
SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
COMMERCIAL USE OF THE PRODUCT VOIDS THE
MANUFACTURER’S WARRANTY.
WARNING
This product contains Lithium-Ion
rechargeable batteries. DO NOT mix
Lithium-Ion batteries with general
household waste. According to
Federal and State regulations, removal
and proper disposal of Lithium-Ion
batteries is required. For specific
battery disposal instructions please
contact Call2Recycle at 877-723-
1297 or visit www.call2recycle.org.
EN | 7
THANK YOU
A. Switch Button
B. Mode Button
C. Self-Cleaning Button
D. Display
E. Metal Handle
F. Clean Water Tank
G. Dirty Water Tank Release Button
H. Dirty Water Tank
I. Water Spray
GETTING TO KNOW YOUR CORDLESS FLOOR CLEANER
Thank you for purchasing a Honeywell Cordless Floor Cleaner. This User Manual
is intended to provide you with important information needed to set up, operate,
maintain, use safely, and troubleshoot this product.
J. Brushroll Cover
K. Brushroll Window
L. Brushroll
M. Handle Assembly
N. Water Spray Button
O. Mute / Language Switch Button
P. Battery Pack
Q. Battery Pack Cover
Included in Box
Open the box, take out the protective materials, and take out the product & all
accessories included.
Keep the outer packaging for future transportation and maintenance.
A
C
D
E
F
G
B
M
P
Q
O
N
H
J
K
L
I
Name of each part
EN | 8 EN | 9
GETTING TO KNOW YOUR CORDLESS FLOOR CLEANER
Main Body X1
Metal Handle X1
Charge Base X1
High-Capacity Battery Pack X1
Charger X1
Easy-Change Power Scrub Rollers X2
Filter X2
Triangle Screwdriver X1
Long Cleaning Brush X1
Short Cleaning Brush with Cutter X1
Multi-Surface Cleaning Solution X2
Accessory Storage 1 X1
Accessory Storage 2 X1
User Manual X1
R
R1 R2
S T U
V W X
R. Charging Base
R1. Accessory Storage 1
R2. Accessory Storage 2
S. Power Scrub Roller
T. Charger
U. Short Cleaning Brush with Cutter
V. Triangle Screwdriver
W. Multi Surface Cleaning Solution
X. Long Cleaning Brush
Y. User Manual
Y
Packing List
Cordless Floor Cleaner
User Manual
Read and save these instructions beforeuse
Modelnumber
FC20ULTAMAX PRO
Ifyou have any questions about the operation of this
product,please call us toll-free at 1-800-281-1378 or
EN | 9
GETTING STARTED
Product Assembly
Insert the metal handle into the main body as shown on (Fig.1). Once you hear a
“click”, then the handle should be properly installed.
To remove the handle, insert the triangle screwdriver into the handle release hole
and pull the handle upwards as shown on (Fig.2).
Battery Pack Installation
Remove the battery pack cover plate by using the provided triangle screwdriver
Insert the battery pack into the slot and replace the battery pack cover (Fig.3).
Note: The battery pack does not need to be taken out unless it needs replacement.
Metal tube
lock
Handle release hole
Battery pack
assembly
Battery
pack
cover
Screws
13
2
EN | 10 EN | 11
GETTING STARTED (CONTINUED)
Charge Base and Accessory Storage Assembly
Place the accessory holder 1 and 2 in the direction of the arrow on (Fig.4) and
push them against the charging base. You will hear a “click” once they are installed
properly.
Placing the Machine in to The Charge Base
Placing the machine into the charge ensuring it seats properly on the base pin
module as shown on (Fig.5). When using the product, pick up the machine by
holding the handle and lifting it up out of the charge base.
Installation and Removal of Dirty Water Tank
To remove the dirty water tank, hold the machine, hold the dirty water tank handle
with the other hand, and then press the dirty water tank release button with your
thumb to remove the dirty water tank; to install the dirty water tank, first you
should insert the bottom of the dirty water tank into the machine body, and then
press the dirty water tank until a click is heard in the body, at this moment, it
means the installation is successful. (Fig.6)
Accessory
holder 2
Dirty water
tank release
button
Accessory
holder 1
Rear charge slot
4 5 6
Charging base
Base pin
module
EN | 11
click
sound
GETTING STARTED (CONTINUED)
To remove the clean water tank, support the machine with one hand, hold the
clean water tank handle with the other hand and turn it counter-clockwise in the
unlock position. Lift up the clean water tank.
To install the clean water tank, place it back in the unlock position and twist
clockwise to locked position. (Fig.7)
Roller Brush Removal and Installation
1. Remove the cover plate by gently pulling up the brushroll cover lock.
2. Remove the roller brush lock toward the middle and pull out the roller brush.
To reinstall, insert the left side of the roller brush into the slide until you hear a
click. Reinstall the cover plate by placing it on top of the roller brush and press
firmly until you hear a click. (Fig.8)
Clean
water tank
Brushroll
cover
lock
7
8
Brushroll
lock
Slide
EN | 12 EN | 13
GETTING STARTED (CONTINUED)
Use the Product
Note: Please ensure that the machine is charged before using the product.
If not, please charge it in time and use it after fully charged.
1. Light Strip: When you turn on the machine, it will start in auto mode (the machine will
automatically adjust the suction mode depending on the density of dust). Blue light
strip means minimal dust density. Red light strip means heavier dust density.
While charging, it will show a blue light strip.
2. Mode Indicator: There are 2 suction modes, auto mode and max mode. Auto mode is
the default when you turn on the machine.
3. Air-drying indicator : indicates when the brush roll is being air-dryed when placed
on the charging base for self-cleaning.
4. Error indicator : it will flash to prompt in case of errors such as full water tank,
water shortage of clean water tank, insufficient power or roller brush blockage.
5. Dirty Water Tank Full Indicator : when the dirty water reaches the maximum level,
this icon will flash and a voice prompt will remind the user to clean out the dirty water
tank. *Note: when using the product, you may hear a reminder to clean out the dirty
water tank if the water splashes onto the sensor. The machine will stop automatically.
6. Water shortage indicator of clean water tank: When the water in the clean water
tank is empty, the water shortage icon “ ” flashes, reminding the user to add clean
water.
7. Power digital display: display the real-time power level.
8. Power icon display : power warning light.(When the power is lower than 20%, the
icon turns red to indicate charging, and in other cases it is a cool white light)
9. Self-cleaning display: When the machine enters the self-cleaning mode, the self-
cleaning icon “ ” flashes to remind the user that the machine is self-cleaning.
Display Screen
Self-cleaning display
Light strip
(to show dust density)
Mode indicator
Air drying indicator
Error indicator
Full water indicator of
Dirty Water Tank
Water shortage
indicator of clean
water tank
Power icon display
Power digital display
Battery percentage
Display
EN | 13
OPERATION
Fill the Clean Water Tank
1. Hold the handle of the tank and rotate counterclockwise to remove the tank.
2. Open the cover of the clean water tank, and pour clean water to the maximum
water level.
3. Close the cover to ensure that it is tight, and then put the clean water tank
back into the machine.
4. Hold the handle of the tank and rotate downward clockwise (lock) until you
hear a click for proper installation.
5. Water temperature requirement: below 104°F / 40°C.
6. Cleaning Solution: Only use the provided cleaning solution. Using a cleaning
solution other than what was provided may damage the machine. Pour 2.5
bottle cap of the cleaning solution and add clean water until the maximum
water line (ratio of 1:40).
Using the Machine
1 The On/Off button is located on the top of the handle. Press once to turn on the
machine, auto mode will be the default mode. Press the mode button to switch to
Max mode. Press the On/Off Button again to turn off the machine. (Fig.10)
2. When using the machine, press and hold the water spray button to spray water on
the floor. Release the button to stop spraying. (Fig.11)
3. When the machine is power on or charging, press the mute button to stop the
voice prompt, and press the mute button again to resume the voice prompt. When
the voice function is on, you can switch the language by pressing mute button
for 3 seconds and switch among 5 language voices, in a sequence of English,
German, Italian, French, and Spanish. (Fig.11)
Clean water
tank cover
Max line
Clean water
tank filling port
9
EN | 14 EN | 15
OPERATION (CONTINUED)
4. When the machine is power on, put it upright and the brush motor stops working
immediately, while suction motor works at higher power for 3 more seconds
before it stops.
On/Off button Water
spray
button
Mute button
10 11
12
Note:
1. The water spray button cannot be used together with the On/Off button or the
mode button simultaneously.
2. It is recommended to use the Max mode to work in heavily polluted environments
or when there are many water spots. (Fig.12)
3. When the dirty water tank is full, the full water indicator of Dirty water tank on the
display screen will flash to give an alarm prompt, and the machine motor will stop
working immediately.
4. After using the machine, always put it back on the charge base to prevent the
product from falling over.
5. When clean water tank is in shortage of water, the display screen shows “ ” to
remind user to fill in clean water tank.
6. No matter whether it is powered on or not, please do not wash the floor brush
assembly with water to prevent water from entering the motor, water pump, circuit
board and other electrical components in the floor brush, otherwise it may result in
damage.
7. Do not use the product to suck foaming liquid, nor put high-foaming cleaning
solution into clean water for use.
Max mode
Auto mode
Mode button
EN | 15
13 14
OPERATION (CONTINUED)
Charging the Machine
Put the machine into the charge base, connect one end of the adapter to the
charge base, and plug in the adapter to a socket.
When charging, the display screen shows the battery percentage and light strip
in blue is turning. When it is fully charged, the display screen shows 100% power
and the light strip will remain blue. When put on the charge base while voice
function is on, there will be voice prompts for each steps accordingly.
Ensure to place the charging base in an area close to the wall or a corner to
prevent tripping over it.
Charging
status
Status
in use
Charging
Battery %
Remaing
Battery %
Power cord
Back cover
of changing
base
Note:
1. If the product will not be used for a
long time, charge it every 3 months to
maintain the battery life.
2. Do not keep the charger plugged in
when the product is fully charged. Put
away the charger for safe keeping.
3. When the machine is used for the first
time, the capacity of the battery pack
of the machine may not be full. Please
charge the battery fully before use.
4. The battery percentage showed on the
display when charging is in a opposite
direction when using. (Fig.13)
5. There is space for power cord at back
side of the charging base, to avoid
power cord to be placed on the floor.
(Fig.14)
Base pin
module
plug in the
adapter to a
socket
Put the machine
into the charge
base
EN | 16 EN | 17
OPERATION (CONTINUED)
Air Dry Mode for Brushroll
1. You can manually turn on air-dry mode while the machine is charging. If using
the Self-Cleaning Mode, the machine will automatically turn on the Air-Dry mode
after each Self Cleaning.
2. To manually turn on air dry mode you need to press Mode button while it is
charging. After you turn on the air dry mode, there is voice prompt saying “start
drying brushroll” and the display shows a fan icon. (Fig.16)
3. Air dry function lasts for 4 hours.
4. Air dry mode does not have memory: When it is interrupted, it will restart next
time again with a 4 hour process. It does not have a memory for it being turned
on: when you turn on air dry function, but remove it from charging base and put
it into charging base again, the air dry mode is turned off.
Always Empty the Dirty Water Tank Before Using Self-Cleaning Mode.
Place the machine on the charge base, insert the adapter into the socket, keep at
least 1/2 of the water in the clean water tank, press the self-cleaning button and the
self-cleaning icon on the display screen will flash.
If the voice function is on, the voice will say: start self-cleaning, make sure there is
enough water in water tank. Press any of the On/Off button or mode button or self-
cleaning button to stop self-cleaning, and just return to charging mode or air dry
mode. (Fig.15)
1. Please clean the dirty water water tank before and after the self-cleaning mode.
2. If the dirty water tank is full, the product will not start the self clean mode.
3. Make sure there is more than 25% battery for self-cleaning function.
Press
self-cleaning
button
Remain 1/2
water in the
clean water tank
Pour out the
dirty water
in the Dirty
Water Tank
15 16
Mode
Button
Air dry indicator
EN | 17
CLEANING & MAINTENANCE
Full Dirty Water Tank Reminder
When the product is at use or at self-cleaning mode, once it detects that the dirty
water tank is full, the machine will stop, and the voice prompt gives reminder. Please
clean the dirty water tank accordingly.
Roller Brush Stuck Reminder
When the machine is working or in the cleaning mode, if the roller brush is stuck, it
will cause the machine to stop, and send a voice reminder-”the roller brush is stuck,
please clean the roller brush”. At this time, please take out the roller brush, clean the
foreign objects or entangled hairs stuck in the roller brush, and then return to work.
Refer to page 19 for floor brush assembly cleaning instructions.
Air Duct Block Reminder
When the machine is working or in the cleaning mode, if the air duct is blocked, it will
send a voice prompt-please clean the roller brush, elbow and air duct. Please clean
the air duct in the floor brush assembly and the air duct on the dirty water tank.
Air duct cleaning method: remove the dirty water tank, take out the upper cover of the
dirty water tank and the filter assembly, clean the parts of the dirty water tank and
assemble the dirty water tank, use a tube brush to dredge the garbage in the air duct
of the floor brush assembly, and then put the dirty water tank back in the machine.
(Fig.17)
17
use a tube brush to
dredge the garbage
in the air duct
air duct
Long
Cleaning
Brush
EN | 18 EN | 19
CLEANING & MAINTENANCE (CONTINUED)
Battery Capacity Reminder
When the machine is working, if you hear the voice prompt- “battery power is low”,
stop using the machine and charge it.
The machine will shut down if the battery is totally discharged.
Dirty Water Tank Cleaning
When the water level electrode of the dirty water tank detects that the water is full,
the full water indicator on the machine display screen will flash continuously, and the
machine will stop working, reminding the user to clean the dirty water tank as soon
as possible. Take out the upper cover of the dirty water tank, pour out the dirty water
and garbage in the dirty water tank and garbage basket, and rinse the dirty water
tank and garbage basket with clean water. If the surface of the filter sponge and the
filter assembly is covered with dirt, they can also be washed with water. After rinsing,
the above parts need to be dried, and then put back into the machine. If you find that
there are stubborn stains on the inner wall of the dirty water tank and garbage basket,
please clean it directly with a tube brush. (Fig.18)
Note: 1. It is recommended to clean the dirty water tank after each use.
2. If the water level detection electrode is dirty, it can be cleaned with a rag
or rinsed with clean water and then wiped with a rag.
Dirty water tank
Water level detection
electrode
18
Filter dirty
water tank
Sponge
Cover
Garbage Basket
EN | 19
CLEANING & MAINTENANCE (CONTINUED)
Floor brush assembly cleaning
Use your fingers to buckle the roller brush cover lock and push it upwards, take out
the roller brush cover assembly, pinch the two roller brush locks in the middle, take
out the roller brush assembly, use dry cloth to clean the empty roller position. Use a
small brush to clean the foreign matter wrapped around the roller brush. Clean, wash
the roller brush and the roller brush cover in clean water. After cleaning is complete,
assemble the brush and the cover in place.
Note: 1. If it is not to be used immediately, please air dry the dirty water tank body,
the upper cover of the dirty water tank, the filter sponge, the filter assembly,
the garbage basket, the roller brush body and the roller brush cover plate
assembly in a ventilated place before re-installing them into the machine.
2. The roller brush can also be placed in the accessory holder to dry.
Filter sponge
Long Cleaning
Brush with
Bristles
Use Short Cleaning Brush with Cutter to
clean brushroll
to hold Long Cleaning
Brush with Bristles
19
20
to hold
brush
roller
to hold filters
Charging base
EN | 20 EN | 21
CLEANING & MAINTENANCE (CONTINUED)
Daily Maintenance and Storage
1. After each use, it is recommended to clean the dirty water tank, the upper cover
of the dirty water tank, the garbage basket, the filter assembly, the filter sponge,
the roller brush body and the roller brush cover plate assembly for the next
use. After the accumulative use time of the filter element reaches 30-50 hours
(depending on the use of the filter element), it is recommended to purchase
and replace the filter element at the designated location, so as not to affect the
performance of the machine.
2. After usage place the machine on the charge base to ensure that the product
can stand upright reliably and reduce damage to the machine due to accidental
touch and dumping. When connecting to AC power supply, it starts to charge the
machine.
3. When packing and storing, if you need to disassemble the battery pack parts,
please remove the battery pack cover, hold the battery pack and pull it out to
take out the battery pack.
4. When the machine won’t be used for a long time, please put the machine in a
cool and dry place, rather than in direct sunlight or humid environment.
5 When the air duct is blocked, please take out the roller brush assembly, the roller
brush cover plate assembly and the dirty water tank assembly, and insert a tube
brush into the the air inlet at the junction of the body and the dirty water tank
and then poke down to remove the garbage blocking the air duct.
6. There is accessory storage 1 and accessory storage 2 on the charge base that
can be used to store accessories. The large cylinder on accessory storage 1 can
hold the brush roller, and the small cylinder can hold the long cleaning brush
with bristles. Accessory storage 2 can hold the filters.
• Store the appliance indoors. Do not expose the appliance to outdoor weather
conditions, moisture, rain, snow or heat. Do not use or store in temperatures
below 41°F (5°C) or above 100°F (38°C). Ensure that the appliance is stored in
room temperature before operating.
• DO NOT IMMERSE THE MOTOR HOUSING, MAIN POWER CABLE OR
ADAPTER IN WATER OR ANY OTHER LIQUIDS.
• DO NOT leave the appliance close to heat sources such as ovens, heaters and
radiators nor allow the cord to come into contact with hot surfaces.
• Clean the appliance only with a dry cloth. DO NOT use any lubricants, cleaning
agents, polishes or air fresheners on any part of the appliance.
Table of contents
Languages:
Other Honeywell Vacuum Cleaner manuals
