Honeywell FocusBT AP-010-BT User manual

Access Point 
AP-010BT/AP-100BT
Quick Start Guide
Rev E
7/15
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Idźna stronę: www.honeywellaidc.com po quick start w języku polskim.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Pre slovenčinu choďna www.honeywellaidc.com
Para Português, acesse www.honeywellaidc.com.br.
日本語 : www.honeywellaidc.com をご覧ください。
如要到中国 www.honeywellaidc.com（简体）。
查看繁体版请登陆 www.honeywellaidc.com
한글 www.honeywellaidc.com 로이동합니다 .
ʲʡʤʱʸʢʬʡʺʩʸˬʺʡʥʺʫʡʨʰʸʨʰʩʠʤʸʺʠʬʸʥʡʲwww.honeywellaidc.com.
Çäè´á Åàˆ moc.cdiallewyenoh.www ààú¬ ÇàõÑéí¬

Connecting the Access Point
Note: Refer to your User’s Guide at www.honeywellaidc.com to
determine which Access Point model is compatible with your
scanner.
1. Slide the O-ring into the groove in the connector.
Note: If you choose not to install the O-ring, the Access Point will be
rated to IP41, instead of IP54.
2. Plug the interface cable into the Access Point first and then into
the appropriate port on the computer. The Page button blinks
when the Access Point is first connected to the host.

3. Turn on the computer (laptop/desktop).
USB Connection:

RS232 Connection:
RS485 Connection:

Keyboard Wedge Connection:
Linking a Scanner
4. Scan the linking bar code on the top of the Access
Point to establish a connection between the
Access Point and the scanner. 

The scanner emits a short beep and flashes the
green LED to confirm a connection with the
Access Point. The Access Point’s Page button
light turns solid blue.

Linking a 4820 Scanner
5. Remove the 4820 Linking bar code from the Access Point kit and
attach it to the Access Point. Scan the 4820 Linking bar code to
establish a connection between the Access Point and the 4820
scanner. The scanner emits a short beep and flashes the green
LED to confirm a connection with the Access Point. The Access
Point’s Page button remains blue. If you have difficulty
connecting with your 4820, it may be due to Code XML software
in your scanner. Scan the following bar code, then scan the 4820
Linking bar code. These steps may resolve this connection
problem.
Managing Connections
Auto Reconnect Mode
By default, the Access Point is set to Auto Reconnect On, so
the scanner begins the relink process immediately, when a con-
nection to the Access Point is lost. If you do not want to relink
automatically, scan the Auto Reconnect Off bar code.
Code XML Off
* Auto Reconnect On
Auto Reconnect Off

Changing Batteries
If the scanner turns off due to a low battery, you can change the
battery without losing the link with the Access Point, provided
the scanner is in range. A few seconds after the scanner pow-
ers up, the scanner relinks to the Access Point. Refer to your
User’s Guide at www.honeywellaidc.com for additional informa-
tion about charging the batteries.
Low Power Mode
When there is no activity within a specified time period, the
scanner enters a low power mode. The default time out period
is one hour. Press the scanner’s trigger to power the scanner
back up. If the scanner was linked to the Access Point when it
went to “sleep,” it will re-link as long as it is in range.
If multiple scanners use the same Access Point, it is possible to
inadvertently unlink a scanner that is in “sleep” mode, that has a
dead battery, or is in the process of getting a new battery. To
prevent this from happening, you can disable the sleep mode
(time out) by scanning the No Time Out bar code below.
Unlinking the Scanner from Access Point
If you know that your scanner is not going to be used for a while,
you can unlink the scanner by scanning the Unlink Scanner
bar code below.
No Time Out (0)
Unlink Scanner

Page Button
Note: This feature does not apply to 4820 scanners.
When you press the Page button on the
Access Point, the scanners associated
with that Access Point will begin beeping
(3 short and 1 long beep). If you press the
trigger on a scanner that is beeping in
response, or press the Page button on the
Access Point a second time, all associ-
ated scanners will stop beeping.
LED Dimmer
Scan a bar code to set the brightness of your Page button.
Page
button
LED Dimmer Off
LED Dimmer - Low
LED Dimmer - Bright

Adding Carriage Return Suffix
If you want a carriage return (CR) to display after the bar code data
on your output, scan the Add CR Suffix bar code below. Scan the
Clear All Suffixes bar code to remove suffixes.
Standard Product Defaults
This bar code resets all standard product default settings.
Note: Resetting standard defaults disconnects the scanner from the
Access Point. Scan the Linking bar code to re-establish a
connection. Refer to your User’s Guide at
www.honeywellaidc.com for additional information about
product defaults.
Add CR Suffix
Clear All Suffixes
Standard Product Default Settings

Additional Programming
The Access Point has all the programming capability of a Cordless
Charge Base. Refer to Cordless System Operation information in
your User’s Guide at www.honeywellaidc.com for programming
information.
Required Safety Labels
Label location for item number, serial
number, revision information, compli-
ance, and safety information

Product Specifications
Parameter Specification
Dimensions (Typical):
Height 1.1 inch (28mm)
Length 4.3 inches (109mm)
Width 2.8 inches (71mm)
Weight 2.3 ounces (66g)
Voltage Requirements 5 VDC + 0.5V
Current Draw
100mA @ 5 volts typical
300mA @ 5 volts maximum
Temperature Ranges:
Operating 32F to +122F (0C to +50C)
Storage -40F to +158F (-40C to +70C)
Radio:
Frequency 2.4 to 2.5 GHz (ISM Band) Frequency
Hopping Bluetooth v.2.1
Range - AP-010BT 33 ft. (10m) typical
Range - AP-100BT 328 ft. (100m) typical
Data Rate Up to 1MBps
Humidity 5 to 95% non-condensing
Mechanical Drop
Operational after 50 drops from 3.28 feet 
(1 m) to concrete
Vibration 5G Peak from 22Hz to 300Hz
ESD Sensitivity
Up to 15kV direct air
Up to 8 kV indirect coupling plane

Technical Assistance
Contact information for technical support and product service can be
found at www.honeywellaidc.com.
Limited Warranty
Refer to www.honeywellaidc.com/warranty_information for your
product’s warranty information.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the fur-
nishing, performance, or use of this material.
This document contains proprietary information that is protected by copy-
right. All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written con-
sent of HII.
2010-2015 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com