Hoshizaki FM-120KE-HC User manual

FM-120KE-HC
FM-120KE-HCN
FM-120KE-50-HC
FM-120KE-50-HCN
FM-80KE-HC
FM-80KE-HCN
FM-60KE-HC
CM-50KE-HC
Telford 70 Sta󰀨ord Park 7, Telford, Shropshire TF3 3BQ UK L1F114202 (021521)
SELF-CONTAINED ICE MAKER
MACHINE A GLACE A BACINTEGRE
EISBEREITER MIT EINGEBAUTEM VORRATSBEHÄLTER
IJSMACHINE MET INGEBOUWDE BUNKER
MÁQUINA DE CUBITOS DE HIELO AUTÓNOMA
MACCHINA PER LA PRODUZIONE DI GHIACCIO AUTOCONTENUTA
FOR END USER
POUR UTILISATEUR
FÜR DEN ENDKUNDEN
VOOR DE GEBRUIKER
PARA USUARIO
PER L’UTENTE FINALE
INSTRUCTION MANUAL
(original instructions)
NOTICE D’UTILISATION
(instructions traduites)
BEDIENUNGSANLEITUNG
(Übersetzung)
GEBRUIKSAANWIJZING
(vertaalde instructies)
MANUAL DE INSTRUCCIONES
(instrucciones traducidas)
MANUALE D’ISTRUZIONI
(traduzione)
FM-120/80KE-HC

IMPORTANT SAFETY INFORMATION ...................................................................................................1
I. INSTALLATION INSTRUCTIONS ......................................................................................................3
1. CONSTRUCTION...........................................................................................................................3
2. LOCATION .....................................................................................................................................3
3. ELECTRICAL CONNECTIONS ......................................................................................................4
4. WATER SUPPLY AND DRAIN CONNECTIONS ...........................................................................4
II. OPERATING INSTRUCTIONS...........................................................................................................5
1. START UP ......................................................................................................................................5
2. SHUT DOWN..................................................................................................................................5
3. PREPARING THE ICEMAKER FOR LONG STORAGE ................................................................5
III. MAINTENANCE..................................................................................................................................6
1. CLEANING .....................................................................................................................................6
2. INSPECTION AND MAINTENANCE ..............................................................................................7
3. BEFORE CALLING FOR SERVICE ...............................................................................................8
4. DISPOSAL......................................................................................................................................9
5. WARRANTY ...................................................................................................................................9
SPECIFICATIONS..................................................................................................................................10
INFORMATIONS DE SECURITE IMPORTANTES................................................................................10
I. CONSIGNES D’INSTALLATION ......................................................................................................12
1. CONSTRUCTION.........................................................................................................................12
2. EMPLACEMENT ..........................................................................................................................12
3. BRANCHEMENTS ELECTRIQUES .............................................................................................13
4. BRANCHEMENTS D’ARRIVEE ET DE VIDANGE D’EAU...........................................................13
II. CONSIGNES D’UTILISATION..........................................................................................................14
1. MISE EN MARCHE ......................................................................................................................14
2. ARRET..........................................................................................................................................14
3. PREPARATION DU DISTRIBUTEUR DE GLACE EN VUE D’UN ENTREPOSAGE
DE LONGUE DUREE ...................................................................................................................14
III. ENTRETIEN .....................................................................................................................................15
1. NETTOYAGE................................................................................................................................15
2. INSPECTION ET ENTRETIEN.....................................................................................................16
3. AVANT D’APPELER UN REPARATEUR .....................................................................................17
4. MISE AU REBUT..........................................................................................................................18
5. GARANTIE ...................................................................................................................................18
SPECIFICATIONS..................................................................................................................................19
WICHTIGE SICHERHEITSHINWEISE...................................................................................................20
I. INSTALLATIONSANLEITUNG .........................................................................................................22
1. KONSTRUKTION .........................................................................................................................22
2. AUFSTELLORT ............................................................................................................................22
3. ELEKTRISCHE ANSCHLÜSSE ...................................................................................................23
4. WASSERZULAUF- UND WASSERABFLUSSANSCHLÜSSE.....................................................23
II. BEDIENUNGSANLEITUNG .............................................................................................................24
1. INBETRIEBNAHME......................................................................................................................24
2. AUSSCHALTEN ...........................................................................................................................24
3. MASSNAHMEN FÜR DIE LANGFRISTIGE LAGERUNG DES EISBEREITERS ........................24
III. WARTUNG .......................................................................................................................................25
1. REINIGUNG .................................................................................................................................25
2. INSPEKTION UND WARTUNG....................................................................................................26
3. VOR ANRUF DES KUNDENDIENSTES ......................................................................................27
4. ENTSORGUNG ............................................................................................................................28
5. GEWÄHRLEISTUNG....................................................................................................................28
TECHNISCHE DATEN...........................................................................................................................29
ENGLISH
FRANCAIS
DEUTSCH

NEDERLANDS
ESPAÑOL
ITALIANO
BELANGRIJKE VEILIGHEIDSINFORMATIE.........................................................................................30
I. INSTALLATIE-INSTRUCTIES ..........................................................................................................32
1. CONSTRUCTIE............................................................................................................................32
2. PLAATSING..................................................................................................................................32
3. ELEKTRISCHE AANSLUITINGEN...............................................................................................33
4. AANSLUITING VAN WATERTOEVOER- EN WATERAFVOERLEIDINGEN ..............................33
II. BEDIENINGSINSTRUCTIES............................................................................................................34
1. OPSTARTEN................................................................................................................................34
2. UITZETTEN ..................................................................................................................................34
3. DE IJSMAKER GEREEDMAKEN VOOR LANGDURIGE OPSLAG.............................................34
III. ONDERHOUD ..................................................................................................................................35
1. REINIGING ...................................................................................................................................35
2. INSPECTIE EN ONDERHOUD ....................................................................................................36
3. VOORDAT U BELT VOOR SERVICE ..........................................................................................37
4. VERWIJDERING ..........................................................................................................................38
5. GARANTIE ...................................................................................................................................38
SPECIFICATIES.....................................................................................................................................39
INFORMACIÓN IMPORTANTE DE SEGURIDAD.................................................................................40
I. INSTRUCCIONES DE INSTALACIÓN .............................................................................................42
1. ESTRUCTURA .............................................................................................................................42
2. UBICACIÓN..................................................................................................................................42
3. CONEXIONES ELÉCTRICAS ......................................................................................................43
4. SUMINISTRO DE AGUA Y CONEXIONES DE DRENAJE..........................................................43
II. INSTRUCCIONES DE UTILIZACIÓN...............................................................................................44
1. PUESTA EN MARCHA.................................................................................................................44
2. DESCONEXIÓN ...........................................................................................................................44
3. PREPARACIÓN DE LA MÁQUINA DE HIELO PARA UN ALMACENAMIENTO
PROLONGADO ............................................................................................................................44
III. MANTENIMIENTO............................................................................................................................45
1. LIMPIEZA .....................................................................................................................................45
2. REVISIÓN Y MANTENIMIENTO ..................................................................................................46
3. ANTES DE LLAMAR AL SERVICIO TÉCNICO............................................................................47
4. ELIMINACIÓN ..............................................................................................................................48
5. GARANTÍA ...................................................................................................................................48
ESPECIFICACIONES ............................................................................................................................49
INFORMAZIONI IMPORTANTI SULLA SICUREZZA ............................................................................50
I. ISTRUZIONI PER L’INSTALLAZIONE .............................................................................................52
1. COMPONENTI .............................................................................................................................52
2. UBICAZIONE................................................................................................................................52
3. COLLEGAMENTI ELETTRICI ......................................................................................................52
4. COLLEGAMENTO ALL’APPROVVIGIONAMENTO DELL’ACQUA E COLLEGAMENTO
DI SCARICO.................................................................................................................................53
II. ISTRUZIONI DI FUNZIONAMENTO ................................................................................................53
1. AVVIO...........................................................................................................................................54
2. ARRESTO ....................................................................................................................................54
3. PREPARATIVI PER LA CONSERVAZIONE A LUNGO TERMINE DELLA MACCHINA .............54
III. MANUTENZIONE .............................................................................................................................55
1. PULIZIA ........................................................................................................................................55
2. CONTROLLO E MANUTENZIONE ..............................................................................................56
3. PRIMA DI RIVOLGERSI ALL’ASSISTENZA ................................................................................57
4. SMALTIMENTO............................................................................................................................58
5. GARANZIA ...................................................................................................................................58
SPECIFICHE..........................................................................................................................................59

1
ENGLISH
IMPORTANT SAFETY INFORMATION
Throughout this manual, notices appear to bring your attention to situations which could result in
death, serious injury, or damage to the unit.
WARNING Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE Indicates a hazardous situation which, if not avoided, could result in damage
to the unit.
HYGIENE Indicates important precautions for hygiene and food safety.
IMPORTANT Indicates important information about the use and care of the unit.
This icemaker uses HFC-free refrigerant (propane) and HFC-free foam insulation that are non-
ozone-depleting and environmentally sustainable materials having very low global warming
potential.
WARNING
This icemaker contains ammable refrigerant in its cooling unit; installation, handling, servicing
and disposal must therefore only be carried out by authorized technicians.
The refrigerant contained in this icemaker is ammable and sealed in the refrigeration system.
Although the refrigerant does not leak out under normal usage, take utmost care when
handling this icemaker so as not to cause any damages to the system.
In the case of accidental damage to the refrigeration system causing refrigerant leak:
* Do not create a source of ignition in the area.
* Do not operate electrical switches or plugs in the area.
* Do not use naked ame.
* Immediately ventilate the area by opening doors and/or windows.
* Call service engineer.
IMPORTANT
This booklet is an integral and essential part of the product and should be kept and preserved
by the user.
Please read carefully the guidelines and warnings contained herein as they are intended to
provide the user with essential information for the continued safe use and maintenance of the
product. In addition, it provides GUIDANCE ONLY to the user on the correct services and site
location of the icemaker.
Please preserve this booklet for any further consultation that may be necessary.

2
ENGLISH
WARNING
This is a commercial icemaker, and should be destined only to be used for the purpose for
which it has been expressly designed and attached to a suitable storage bin as specied by
Hoshizaki.
Any other use should be considered improper and therefore dangerous. The manufacturer
will not be held liable or responsible for any damage caused by improper, incorrect and
unreasonable use.
The installation, and relocation if necessary, must be carried out by qualied personnel,
in accordance with current regulations, according to the manufacturer’s instructions.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
The use of any electrical appliance involves the observance of some fundamental rules. In
particular:
*Instances of high humidity and moisture increase the risk of electrical short circuits and
potential electrical shocks. If in doubt, disconnect the icemaker.
*Do not damage the power cord or pull it in order to disconnect the icemaker from the
electrical supply network.
*If the supply cord is damaged, it must be replaced by a replacement cord available from
Hoshizaki Parts/Service Centres.
*Do not touch the electrical parts or operate the switches with damp hands.
*This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, it can however be used
by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge providing they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
*Children shall not play with the appliance.
*Cleaning and user maintenance shall not be made by children without supervision.
* Do not attempt to modify the icemaker. Only qualied personnel may disassemble or repair
the appliance.
When positioning the appliance, ensure the supply cord is not trapped or damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the rear of the
appliance.
The meaning of this ISO 7010 W021 symbol is:
Warning: Risk of re

3
ENGLISH
2. LOCATION
WARNING
This icemaker is not intended for outdoor use.
The icemaker should not be located next to ovens, grills or other high heat producing
equipment.
This appliance is not suitable for installation in an area where a water jet could be used.
CAUTION
The location should provide a rm and level foundation for the icemaker.
NOTICE
Do not place anything on top of the icemaker or in front of the louver.
IMPORTANT
Normal operating ambient temperature should be within 5°C to 40°C. Water connection is
cold water only. Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may a󰀨ect production capacity.
Allow the clearance specied below for proper air circulation and ease of maintenance and/or
service should they be required.
Top View Side View
Rear
ICEMAKER
Front
Left Right Rear
Front
Top
ICEMAKER
15cm
15cm
15cm 15cm
15cm
In some high humidity environments, condensation may form inside the machine and drip onto
the oor. Do not install where the oor can be a󰀨ected by water.
Avoid prolonged exposure of the appliance to direct sunlight.
I. INSTALLATION INSTRUCTIONS
1. CONSTRUCTION
Top Panel
Front Panel (Left)
Air Filter Front Cover
Storage Bin
Louver
Operation Panel
Door
[FM-120KE-HC, 80KE-HC]
Top Panel
Storage Bin
Door
[FM-60KE-HC, CM-50KE-HC]
Front Panel
Air Filter
Operation Panel

4
ENGLISH
3. ELECTRICAL CONNECTIONS
WARNING
THIS APPLIANCE MUST BE EARTHED
This icemaker requires an earth that meets the national and local electrical code requirements.
Disconnect the main power supply before any maintenance, repairs or cleaning is undertaken.
* Usually an electrical permit and services of a licensed electrician are required.
For the U.K. and the Republic of Ireland only
* The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow = Earth
Blue = Neutral
Brown = Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is marked with the letter
E or by the symbol or coloured Green or Green-and-Yellow. The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Red.
* Should the socket outlets in the installation site not be suitable for the plug supplied with your product, the plug must be
removed (cut o󰀨 if it is moulded on plug) and an appropriate plug tted.
If the non-rewirable plug has been cut from the power supply cord, it must be disposed of. There should be no attempt to
reuse it. Inserting such a plug into a socket elsewhere presents a serious risk of electrical shock.
* The non-rewirable plug must never be used without a fuse cover being tted.
The correct replacement for the detachable fuse cover is identiable from the manufacturer’s reference number stamped on
the plug.
Supply of replacement fuse covers can be obtained from Hoshizaki Parts/Service Centres.
Fuses should be rated at 13A and approved to BS 1362.
4. WATER SUPPLY AND DRAIN CONNECTIONS
WARNING
Connect to potable cold water supply only.
* The connections to the mains water supply must be made in accordance with the countries’ current requirements of the Water
Supply or Water Fittings Regulations.
* Icemaking water must be potable water. Where scaling can be caused by water quality, installation of an external lter or
softener is recommended. Contact your local water treatment professional or Hoshizaki service agent.
* A plumbing permit and services of a licensed plumber may be required in some areas.

5
ENGLISH
II. OPERATING INSTRUCTIONS
CAUTION
Do not step into the storage bin, or put your hands into
the machine compartment inside the storage bin. Children
can get trapped inside, or the icemaking mechanism may
suddenly move, resulting in injury.
NOTICE
All parts are factory-adjusted. Improper adjustments may result in failure.
If the unit is turned o󰀨, wait for at least 3 minutes before restarting the icemaker to prevent
damage to the compressor.
HYGIENE
This icemaker is designed to produce edible ice. To keep the icemaker hygienic:
*Wash your hands before removing ice. Use the plastic scoop provided (accessory).
*The storage bin is for ice use only. Do not store anything else in the bin nor use other
electrical appliances in the bin.
*Clean the storage bin before use (see “III. 1. CLEANING”).
*Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.
*Close the door after removing ice to prevent entrance of dirt, dust or insects into the storage
bin.
1. START UP
The installer will normally commission the icemaker to start the automatic icemaking process. To ensure continuous operation,
make sure that:
* The water supply tap is on, and
* The icemaker is connected to the power supply.
To start the icemaking process, check the position of the operation switch on the operation panel:
“OFF” position - Move it to the “ON” position.
“ON” position - Press the ice button.
2. SHUT DOWN
Press the stop button on the operation panel. The “STOP” and “DRAIN” modes light up on the display. Then, only the “DRAIN”
mode goes o󰀨.
3. PREPARING THE ICEMAKER FOR LONG STORAGE
NOTICE
This icemaker will not work at subfreezing temperatures. To prevent damage to the water
supply line, drain the icemaker when air temperature is below zero.
HYGIENE
When shutting down the icemaker for two or more days, drain the icemaker to prevent
contamination in the water circuit.

6
ENGLISH
1) Follow the instructions in “2. SHUT DOWN”.
2) Move the operation switch to the “OFF” position.
3) Close the water supply tap.
4) Remove the inlet hose from the water tap, and drain the hose.
5) Disconnect the power supply.
6) Remove all ice from the storage bin, and clean the bin.
7) Ask for draining of the icemaker by professional qualified
personnel.
8) To restart the icemaker, follow the instructions in “1. START UP”.
III. MAINTENANCE
1. CLEANING
WARNING
Before carrying out any cleaning or maintenance operations, unplug the icemaker from the
electrical supply network.
This appliance must not be cleaned by use of a water jet.
CAUTION
When using a neutral cleaner or sodium hypochlorite, thoroughly read and understand the
instructions provided to prevent potential health problems.
NOTICE
Ask a trained service person to clean and sanitize the icemaker water system at least twice a
year and to check and clean the condenser at least once a year.
To prevent possible damage, do not clean the plastic parts with water above 40°C or in a
dishwasher.
[a] Machine and Bin Exterior
Wipe the exterior at least once per week with a clean, soft cloth. Use a damp cloth containing a neutral cleaner to wipe o󰀨
grease or dirt.
[b] Scoop and Storage Bin Handle Cleaning/Sanitisation (Daily)
1) Either mix 1 litre of water with 4 ml of 5.25% sodium hypochlorite solution in a suitable container, or the recommended
Hoshizaki sanitiser as directed.
2) Soak the scoop in the solution for more than 3 minutes. Rinse thoroughly, and shake to remove surplus liquid.
Note: Using a cloth to dry may re-contaminate.
3) Use a neutral cleaner to wash the storage bin handle. Rinse thoroughly.
4) Soak a clean cloth with the sanitising solution, and wipe the handle. Use fresh water and a clean cloth to rinse/dry.
[c] Storage Bin Interior Cleaning/Sanitisation (Weekly)
1) Open the storage bin door, and remove all ice.
Operation Panel
Ice Button Display Stop Button
Maintenance Button
(service use only) Operation Switch

7
ENGLISH
2) Slightly warp the slope to release it from the left and right shafts.
3) Remove the drain cap located in the base of the storage bin.
4) Wash the bin liner, slope and drain cap with a neutral non-abrasive cleaner.
Rinse thoroughly.
Note: Take care not to damage the bin control actuator at the top of the bin.
5) Either mix 5 litres of water with 18 ml of 5.25% sodium hypochlorite solution in a
suitable container, or the recommended Hoshizaki sanitiser as directed.
6) Soak a clean sponge or cloth with the solution, and wipe the bin liner surfaces,
slope and drain cap.
7) Ret the slope and drain cap.
8) Wipe the surface of the bin door with the solution. Close the bin door.
9) The remaining solution can be used to sanitise utensils.
Note: Do not wipe dry or rinse after sanitising, but allow to air dry.
[d] Storage Bin Door
Clean the storage bin door at least once a week, using a neutral non-abrasive cleaner. Rinse thoroughly after cleaning and
sanitise as required.
[e] Air Filter
Plastic mesh air lters remove dirt or dust from the air, and keep the condenser from getting clogged. If the lters get clogged,
the icemaker’s performance will be reduced. Remove and clean the air lter(s) at least twice per month:
1) Slide the air lter o󰀨 the louver.
2) Clean the air filter by using a vacuum cleaner. When severely clogged, use
warm water and a neutral cleaner to wash the air lter.
3) Rinse and dry the air lter thoroughly.
NOTICE
After cleaning, be sure to place the air lter back in position.
2. INSPECTION AND MAINTENANCE
NOTICE
To achieve optimum icemaker performance, the following parts need periodic inspection and
maintenance:
Extruding head (upper bearing)
Housing (lower bearing)
Mechanical seal
[a] Inspection
These parts should be inspected after two years from installation or 10,000 hours of operation, whichever comes rst, and once
a year afterwards. Replacement of these parts is required if wear exceeds factory recommendations.
Their service life, however, depends on water quality and environment. More frequent inspection and maintenance are
recommended in bad or severe water conditions.
Consult with your local Hoshizaki service agent about inspection and maintenance service.
Drain Cap
Slope
Air Filter Louver

8
ENGLISH
[b] Replacement
The extruding head (upper bearing) and mechanical seal must be replaced after four years from installation or 20,000 hours of
operation, whichever comes rst, to prevent the risk of serious accidents or failures. Contact your local Hoshizaki service agent
for replacement.
When the total operating time reaches 20,000 hours, the display ashes “PC”. Then, after 500 hours, the unit shuts down to
ensure safety. Contact your local Hoshizaki service agent for replacement as soon as the display starts ashing.
Once the unit shuts down after 500 hours, the operation can be resumed by turning o󰀨 the operation switch and turning it back
on. But the unit shuts down again after 500 hours. To resume the operation, contact your local Hoshizaki service agent for the
required replacement.
Replacement of the housing (lower bearing) may be required depending on water quality and wear condition.
3. BEFORE CALLING FOR SERVICE
WARNING
Do not damage the refrigerant circuit. In the case of accidental damage to the refrigeration
system causing refrigerant leak:
* Do not create a source of ignition in the area.
* Do not operate electrical switches or plugs in the area.
* Do not use naked ame.
* Immediately ventilate the area by opening doors and/or windows.
* Call service engineer.
[a] Error Code Indication
If the error code “E” is indicated on the display, before calling for service, check the following.
Code Remedy
E0 Possibility of water leaks. Turn OFF operation switch, and turn it ON again. If error code appears again, call for
service.
E1 Low ice production. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
E2 Water supply circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for
service.
E3 Gear motor failure. Turn OFF operation switch, and turn it ON again after 10 minutes. If error code appears again, call
for service.
E4 Abnormal high side pressure. Clean air lter. Check that icemaker is properly installed according to installation manual.
Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
E5 Electric circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
E8 Compressor could be overheated. Check that icemaker is properly installed according to installation manual. Turn OFF
operation switch, and turn it ON again after 10 minutes. If error code appears again, call for service.
EA Electric circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
Eb Electric circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
EC Electric circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
EE Gear motor failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
EF Supply voltage is too low. Check that voltage is in required range and icemaker is not sharing a single receptacle with
other appliances. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
EH Electric circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
EL Bin control switch has failed. Turn OFF operation switch, and turn it ON again. If error code appears again, call for
service.
En Electric circuit failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.
EU Controller board failure. Turn OFF operation switch, and turn it ON again. If error code appears again, call for service.

9
ENGLISH
[b] No Error Code Indication
If the icemaker does not work properly or does not work at all and no error code is indicated on the display, before calling for
service, check that:
* The power is supplied to the unit.
* The water is turned on.
* The air lter is clean.
For further assistance or advice, contact your local Hoshizaki service agent.
4. DISPOSAL
Comply with local regulations regarding disposal of this appliance and its refrigerant gas. Before you scrap the appliance, take
o󰀨 the door to prevent children trapped.
Correct disposal of this product:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device, use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
5. WARRANTY
Hoshizaki warrants to the original owner/user that all Hoshizaki branded products shall be free of defects in material and/or
workmanship for the duration of the “warranty period”. The warranty shall be e󰀨ective for two years from the date of installation.
Hoshizaki’s liability under the terms of the warranty are limited and shall exclude routine servicing, cleaning, essential
maintenance and/or repairs occasioned by misuse and installations not in accordance with Hoshizaki guidelines.
Warranty repairs should be completed by an approved Hoshizaki dealer or service agency using genuine Hoshizaki components.
To obtain full details of your warranty and approved service agency, please contact your dealer/supplier, or the nearest Hoshizaki
Service o󰀩ce:
Hoshizaki UK - UK, Ireland
TEL: [phone]
FAX: [phone]
[email protected]
Hoshizaki Middle East - Middle East
TEL: [phone]
FAX: [phone]
[email protected]
Hoshizaki Deutschland - Germany, Switzerland, Austria
TEL: [phone]
FAX: [phone]
[email protected]
Hoshizaki Benelux - Netherlands, Belgium, Luxembourg
TEL: [phone]
[email protected]
Hoshizaki France - France
TEL: [phone]
FAX: [phone]
[email protected]
Hoshizaki Italia - Italy
TEL: [phone]
TEL: [phone]
[email protected]
Hoshizaki Iberia - Spain, Portugal
TEL: [phone]
FAX: [phone]
[email protected]
Hoshizaki Europe B.V. - all other countries within Europe
and Africa
TEL: [phone]
FAX: [phone]
[email protected]

10
ENGLISH
SPECIFICATIONS
Model FM-120KE-HC FM-120KE-HCN FM-120KE-50-HC
Type Air-cooled, ake ice Air-cooled, nugget ice Air-cooled, ake ice
Power Supply 1 phase 220-240V 50Hz 1 phase 220-240V 50Hz 1 phase 220-240V 50Hz
Electric Consumption 355W 355W 355W
Ice Production per 24h 125kg
(ambient 10°C, water 10°C)
110kg
(ambient 10°C, water 10°C)
125kg
(ambient 10°C, water 10°C)
Dimensions 640mm(W) x 600mm(D) x
800(798-833)mm(H)
640mm(W) x 600mm(D) x
800(798-833)mm(H)
940mm(W) x 600mm(D) x
800(798-833)mm(H)
Refrigerant R290, 100g R290, 100g R290, 100g
Insulation Foam Blowing
Agent
HFC-free HFC-free HFC-free
Weight Net: 66kg (Gross: 76kg) Net: 66kg (Gross: 76kg) Net: 76kg (Gross: 88kg)
Ambient Temp 5 - 40°C 5 - 40°C 5 - 40°C
Water Supply Temp 5 - 35°C 5 - 35°C 5 - 35°C
Water Supply Pressure 0.05 - 0.8 MPa (0.5 - 8 bar) 0.05 - 0.8 MPa (0.5 - 8 bar) 0.05 - 0.8 MPa (0.5 - 8 bar)
Voltage Range Rated voltage ± 6% Rated voltage ± 6% Rated voltage ± 6%
Model FM-120KE-50-HCN FM-80KE-HC FM-80KE-HCN
Type Air-cooled, nugget ice Air-cooled, ake ice Air-cooled, nugget ice
Power Supply 1 phase 220-240V 50Hz 1 phase 220-240V 50Hz 1 phase 220-240V 50Hz
Electric Consumption 355W 270W 270W
Ice Production per 24h 110kg
(ambient 10°C, water 10°C)
85kg
(ambient 10°C, water 10°C)
75kg
(ambient 10°C, water 10°C)
Dimensions 940mm(W) x 600mm(D) x
800(798-833)mm(H)
640mm(W) x 600mm(D) x
800(798-833)mm(H)
640mm(W) x 600mm(D) x
800(798-833)mm(H)
Refrigerant R290, 100g R290, 63g R290, 63g
Insulation Foam Blowing
Agent
HFC-free HFC-free HFC-free
Weight Net: 76kg (Gross: 88kg) Net: 65kg (Gross: 75kg) Net: 65kg (Gross: 75kg)
Ambient Temp 5 - 40°C 5 - 40°C 5 - 40°C
Water Supply Temp 5 - 35°C 5 - 35°C 5 - 35°C
Water Supply Pressure 0.05 - 0.8 MPa (0.5 - 8 bar) 0.05 - 0.8 MPa (0.5 - 8 bar) 0.05 - 0.8 MPa (0.5 - 8 bar)
Voltage Range Rated voltage ± 6% Rated voltage ± 6% Rated voltage ± 6%
Model FM-60KE-HC CM-50KE-HC
Type Air-cooled, ake ice Air-cooled, cubelet ice
Power Supply 1 phase 220-240V 50Hz 1 phase 220-240V 50Hz
Electric Consumption 310W 310W
Ice Production per 24h 65kg
(ambient 10°C, water 10°C)
55kg
(ambient 10°C, water 10°C)
Dimensions 498mm(W) x 570mm(D) x
697mm(H)
498mm(W) x 570mm(D) x
697mm(H)
Refrigerant R290, 50g R290, 50g
Insulation Foam Blowing
Agent
HFC-free HFC-free
Weight Net: 60kg (Gross: 70kg) Net: 60kg (Gross: 70kg)
Ambient Temp 5 - 40°C 5 - 40°C
Water Supply Temp 5 - 35°C 5 - 35°C
Water Supply Pressure 0.05 - 0.8 MPa (0.5 - 8 bar) 0.05 - 0.8 MPa (0.5 - 8 bar)
Voltage Range Rated voltage ± 6% Rated voltage ± 6%