HP Compaq dc7100 SFF Manual

System Unit
1 Computer cover assy with front bezel and no inserts 378007-001
1 Computer cover assembly with front bezel and no
inserts (not painted, for Blue Angel use only)
367855-001
2 Power supply, PFC 350030-001
3 Chassis assembly not spared
Cables
1SATA hard drive cable, 24” (326965-007) 368388-001
1SATA hard drive cable, 18”, (326965-002) 346142-005
2Power switch/LED cable - use switch holder
(370857-001)
368387-001
3Audio cable (CD to system board) (387527-001) 149806-005
4Front I/O device with cable 368386-001
* Diskette drive cable (168999-006) 370499-001
*UATA data cable, 8.6” (108950-054) 368389-001
*Cable for PCI serial port card (use with 283984-005) 302652-005
*Y-adapter Zip drive cable assembly (use with
333504-005 and 326772-005)
374794-001
*RJ-11 telephone cable (use with 361286-021 and
361287-021)
198220-005
*Not shown
Standard and Optional Boards
1System board with alcohol pad and thermal grease 361682-001
2Riser board (riser board is spared complete with
expansion/riser card holder and computer backwall)
371921-001
Memory Modules
* 128 MB/400 MHz FSB 335697-005
* 256 MB/400 MHz FSB 335698-005
* 512 MB/400 MHz FSB 335699-005
* 1.0 GB/400 MHZ FSB 335700-005
Intel Pentium 4 Processors with alcohol pad and thermal grease
* 2.8 GHz\800 MHz FSB, 1MB cache 367594-001
* 3.0 GHz\800 MHz FSB, 1MB cache 366643-001
* 3.2 GHz\800 MHz FSB, 1MB cache 366644-001
* 3.4 GHz\800 MHz FSB, 1MB cache 367415-001
* 3.6 GHz\800 MHz FSB, 1MB cache 367416-001
* 3.8 GHz\800 MHz FSB, 1MB cache 377483-001
Intel Celeron D Processors with alcohol pad and thermal grease
* 2.66 GHz/533 MHz FSB, 256 KB cache 375361-001
* 2.8 GHz/533 MHz FSB, 256 KB cache 375362-001
Other Cards
* TPM security module 366504-001
* PCI Modem, International, FH bracket 361286-021
* PCI Modem, International, LP bracket 361287-021
* Broadcom Gigabit NIC, FH bracket 321793-005
* Broadcom Gigabit NIC, LP bracket 367853-001
* Intel Gigabit NIC 314901-005
* Intel Pro 10/100/1000 MT NIC, LP bracket 338154-005
* FireWire 1394 card, 2 ext/1 int port, LP bracket 361551-001
* FireWire 1394 card, 2 ext/1 int port, FH bracket 361552-001
* PCI serial port card without internal cable/mtg bkt.
(see cable 302652-005)
283984-005
Wireless LAN adapters (802.11b)
* 14 channel, LP bracket, antenna, Japan only 359721-291
* 14 channel, antenna 377160-001
* 14 channel, LP bracket, PCI, antenna 377161-001
Graphics Solutions
* 4 Layer ADD2 Graphics, LP bracket 361264-001
* ATI RV370 VGA graphics, 64M, LP bracket 364833-001
* ATI RV370 VGA graphics, 128M, LP bracket 364834-001
* Quadro NVS 280, 64M, PCI-E, SFF 377158-001
*Not shown
LP= Low profile mounting bracket
FH = Full height mounting bracket
© 2005 Hewlett-Packard Development Company, L.P.
HP and the HP logo are trademarks of Hewlett-Packard
Development Company, L.P.
All other product names mentioned herein may be
trademarks of their respective companies.
HP shall not be liable for technical or editorial errors or
omissions contained herein. The information in this
document is provided “as is” without warranty of any kind
and is subject to change without notice. The warranties for
HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein
should be construed as constituting an additional
warranty.
First Edition, September 2004
Second Edition, January 2005
Document Number
361291-002
HP Compaq Business Desktop
dc7100 Series Personal Computer
Illustrated Parts Map
Small Form Factor
See next page for keyboard spares
Mass Storage Devices (not illustrated)
40 GB\7200 RPM SATA hard drive 365555-001
80 GB\7200 RPM SATA hard drive 345713-005
120 GB\7200 RPM SATA hard drive 365556-001
160 GB\7200 RPM SATA hard drive 345712-005
Diskette drive with mounting screws 333505-005
48X CD-ROM drive with mounting screws 326773-005
52X CD-ROM drive 333969-005
48X/32X/48X CD-RW drive 346788-005
48X/32X/48X +16X DVD/CD-RW drive 359493-005
8X DVD+R/RW drive 358688-005
16X DVD+R/RW drive 381417-001
16/40X DVD ROM drive 325313-005
Zip 250 drive with mounting bracket 333504-005
Zip 250 drive without mounting bracket 326772-005
MultiBay Components
MultiBay drive adapter 335805-005
Diskette drive, MultiBay 335169-005
24X CD-ROM MultiBay drive 325314-005
24X/24X/24X/8X CD-RW/DVD ROM MultiBay 346789-005
8X/24X DVD-ROM MultiBay drive 325316-005
Miscellaneous Parts
1 Front bezel assembly with no inserts 368086-001
* 5.25” Bay bezel blank (carbonite) 335937-005
2 CD drive bezel with diskette drive slot 370501-001
2 CD drive bezel with diskette drive slot (Blue Angel) 374792-001
3 CD drive bezel without diskette drive 367852-001
4 CD drive bezel with Zip drive slot 370504-001
4 CD drive bezel with Zip drive slot (Blue Angel) 374793-001
5# Speaker with alcohol pad and thermal grease 368084-001
6 Heatsink with thermal grease and alcohol pad 367857-001
7 Chassis fan 366641-001
* Heatsink duct baffle 375514-001
8 Heatsink retention plate with thumbscrew 370709-001
9 Solenoid lock with cable 367854-001
* Hood sensor 267529-005
* Mouse, 2-Button, PS/2 with scroll wheel 323614-005
* Mouse, 2-Button, USB, optical with scroll wheel 323615-005
* Mouse, 2-Button, USB, with scroll wheel 323617-005
* Power switch holder with LED holders (use with
368387-001 switch)
370857-001
* Drive Key, USB flash drive, 16 MB 324780-005
* Drive Key, USB flash drive, 128 MB 349988-005
* Drive Key, USB flash drive, 256 MB 344249-005
* Drive Key II, USB flash drive, 256 MB 372889-001
* Real-time-clock battery 153099-001
* Port control cover 367856-001
* Universal clamp lock without cable 335808-005
* Universal clamp lock with cable 335809-005
* Flying serial port with cable 370500-001
Modem Cable Adapters (not illustrated) (use with 198220-005)
Belgium 316904-181 Israel 316904-BB1
Cameroon 316904-AR1 Italy 316904-065
Czech 234963-225 Netherlands 316920-335
Denmark 316904-085 Norway 234963-095
Germany 316904-045 Poland/Russia 316904-241
Greece 316904-151 Sweden 316904-105
Finland 316904-355 Switzerland 304398-115
France 316904-051 Turkey 316904-141
Hungary 234963-215 U.K. 158593-035
*Not shown
#You must remove the heatsink before removing the speaker. When
reinstalling the heatsink, clean the mating surfaces between the heatsink
and the processor with the alcohol pad provided, and apply fresh thermal
grease.
Miscellaneous Screw Kit (not illustrated)
Miscellaneous screw kit, including: 337237-005
M3 x 5mm, hitop (263585-001) 4 ea
#6-32 x .250, hitop (262508-001) 8 ea
#6-32 x .250, pan head (101517-067) 3 ea
#6-32 x .312, hitop (262508-002) 4 ea
#6-19 x .312, pan head (101346-068) 2 ea
#6-19 x .315, T15 head (331310-001) 2 ea

Keyboards (not illustrated)
PS/2, Basic
USB, Basic
USB, Modular
355630-xxx
355631-xxx
355102-xxx
Arabic -175 German -045 Portuguese -135
Belgian -185 Greek -155 Russian -255
BHCSY -B45 Hebrew -BB5 Slovakian -235
Brazilian Portuguese -205 Hungarian -215 Spanish -075
Czech -225 International** -B35 Swedish*** -105
Danish -085 Italian -065 Swiss -115
Europe* -025 Japanese -295 Taiwanese -AB5
Finnish -355 Korean (Hanguel) -KD5 Thai -285
French -055 LA Spanish -165 Turkish -145
French Arabic -DE5 Norwegian -095 U.S. -005
French Canadian -125 PRC -AA5 U.K. -035
* For 355102 only
**Not for 355102
*** Not for 355630
USB Basic Keyboard (not illustrated)
Europe, gray and carbonite (Blue Angel) 355632-B35
System Board Connectors and Jumpers (position of some untitled components may vary in location)
CR1 5CV Aux power LED P24 USB connector, front panel
E14 Boot block P27 Multi Bay
E49 Password jumper P29 SCSI LED connector
J20 PCI slot 1 P52 Serial port “B”
J21 PCI slot 2 P54 Serial Port “A”
J31 PCI Express x1 P60 Primary Serial ATA (SATA) Port
J41 PCI Express x16 P61 Secondary Serial ATA (SATA) Port
P1 Main power (24 pin) P124 Hood lock
P3 Processor VccP Power 12V (6 pin) P125 Hood sensor
P5 Main power switch/LED SW50 CMOS button
P6 Internal chassis speaker XBT1 Battery
P7 CD audio in XMM1 Memory socket
P8 Primary chassis fan XMM2 Memory socket
P9 Secondary chassis fan XMM3 Memory socket
P10 Diskette drive XMM4 Memory socket
P11 Aux audio in XU1 Microprocessor
P20 IDE XU100 Security
P23 Front audio
Riser Board Connectors
J9020 PCI connector J9021 PCI connector
System Hardware Interrupts
IRQ System Function IRQ System Function
0Timer Interrupt 8 Real-Time Clock
1Keyboard 9 Unused
2Interrupt Controller Cascade 10 Unused, available for PCI
3Serial Port (COM B) 11 Unused, available for PCI
4Serial Port (COM A) 12 Mouse
5Unused, available for PCI 13 Coprocessor
6Diskette Drive 14 Primary ATA (IDE) Controller
7Parallel Port (LPT 1)
Computer Diagnostic LEDs (on front of computer)
LED Color LED/Beep Activity State/Message
Power Green On (S0) Computer on
Power Green 1 blink every 2 seconds (S1) Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Clear Off (S4) Hibernation
Power Clear Off (S5) Computer off
Power Red* 2 blinks 1 second apart CPU thermal shutdown
Power Red* 3 blinks 1 second apart CPU not installed
Power Red* 4 blinks 1 second apart Power supply overload (crow bar)
Power Red* 5 blinks 1 second apart Defective or missing memory
Power Red* 6 blinks 1 second apart Defective or missing graphics
Power Red* 7 blinks 1 second apart System board failure (detected prior to video)
Power Red* 8 blinks 1 second apart Invalid ROM based on checksum
Power Red* 9 blinks 1 second apart System not fetching code
Power Red* 10 blinks 1 second apart System hang while loading an option ROM
Hard Drive Green Blinking Hard drive activity
*Blinking codes are repeated after a 2 second pause. Beeps stop after fifth iteration but LEDs continue until problem is
resolved.
Keyboard Diagnostic LEDs, PS/2 Keyboards Only
LED Color LED Activity State/Message
Num, Caps,
Scroll Lock
Green On (Rising Tone) ROM reflashed successfully
Num Lock Green On ROMPaq diskette not present, is bad, or drive
not ready.*
Caps Lock Green On Enter password.
Num, Caps,
Scroll Lock
Green Blink On in sequence, one at a
time - N, C, SL
Keyboard locked in network mode
* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all
three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off,
then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide.
Clearing CMOS
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS
memory using switch SW50.
To clear and reset the configuration, perform the following procedure:
1. Prepare the computer for disassembly.
ÄCAUTION: You must disconnect the power cord from the power source before pushing the Clear CMOS
Button (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board
2. Remove the access panel.
3. Press the CMOS button located on the system board and keep it depressed for 5 seconds.
4. Replace the access panel.
5. Turn the computer on and run F10 Computer Setup (Setup utility) to reconfigure the system.
Disabling or Clearing the Power-On and Setup Passwords
1. Turn off the computer and any external devices, and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. Locate the header and jumper labeled E49.
4. Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only to avoid losing it.
5. Replace the access panel.
6. Plug in the computer and turn on power. Allow the operating system to start.
NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features.
7. To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2.
8. Repeat steps 5-6, then establish new passwords.
Refer to the Computer Setup (F10 Setup) instructions to establish new passwords.
Computer Setup (F10) Utility Features (features may vary)
File
System Information
About
Set Time and date
Replicated Setup
Default Setup
Apply Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Storage Device Configuration
Storage Options
DPS Self-Test
Boot Order
Security
Setup Password
Power-On Password
Password Options
Smart Cover
Embedded Security
Drivelock Security
Data Execution Prevention
Master Boot Record Security
Save Master Boot Record
Restore Master Boot Record
Device Security
Network Service Boot
System IDs
Power OS Power Management Hardware Power Management Thermal
Advanced
Power-On Options
BIOS Power On
Onboard devices
PCI Devices
Bus Options
Device Options
PCI VGA Configuration