HP XM600 - Kayak - 128 MB RAM User manual

HP Kayak
PC Workstation
Service Handbook
PC Workstations and
Accessories
4th Edition
June 2000
Ka_sh_1.bk Page 1 Thursday, June 15, 2000 7:27 PM

Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-1
5
5
HP Kayak XM600 Minitower
PC Workstations
Models and Accessories
Product
Number1
Cache
Memory
Std.
RAM
Hard
Drive
Video
Controller
Multi-media LAN
HP Kayak XM600 7/xxx PC Workstation
HP Kayak XM600 500 MHz - 100 FSB2(CPL: 01/2000 )
D9533N
and
D9533T
Pentium
III with
512 KB of
L2 cache
memory
128 MB
SDRAM
100 MHz
non-ECC
10 GB
Ultra
ATA/66
5.4 krpm
Matrox
Millennium
G250 8 MB
SGRAM video
memory fitted
48✕IDE
CD-ROM
HP
10/100
BT PCI
D9534N
and
D9534T
9.1 GB
SCSI
7.2 krpm
Elsa Synergy II,
32 MB SGRAM
video memory
fitted
HP Kayak XM600 533 MHz - 133 MHz FSB (CPL: 01/2000 )
D9537N
and
D9537T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
SDRAM
100 MHz
non-ECC
10 GB
Ultra
ATA/66
5.4 krpm
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
48✕IDE
CD-ROM
HP
10/100
BT PCI
Ka_sh_1.bk Page 1 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-2
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
HP Kayak XM600 600 MHz - 133 MHz FSB (CPL:01/2000 )
D9540N
and
D9540T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
SDRAM
100 MHz
non-ECC
9.1 GB
7.2 krpm
SCSI
Elsa Synergy II,
32 MB SGRAM
video memory
fitted
48✕IDE
CD-ROM
HP
10/100
BT PCI
D9544N
and
D9544T
128 MB
RDRAM
non-ECC
10 GB
Ultra
ATA/66
5.4 krpm
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
D9545N
and
D9545T
128 MB
SDRAM
100 MHz
non-ECC
9.1 GB
7.2 krpm
SCSI
3Dlabs Oxygen
GVX1, 32 MB
SGRAM video
memory fitted
D9553N
and
D9553T
10 GB
Ultra
ATA/66
5.4 krpm
Matrox
Millennium
G250 8 MB
SGRAM video
memory fitted
HP Kayak XM600 667 MHz -133 MHz FSB (CPL: 01/2000 )
D9546N
and
D9546T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
RDRAM
non-ECC
9.1 GB
7.2 krpm
SCSI
Elsa Synergy II,
32 MB SGRAM
video memory
fitted
48✕IDE
CD-ROM
HP
10/100
BT PCI
D9556N3
and
D9556T
128 MB
SDRAM
100 MHz
non-ECC
D9564N3
and
D9564T
128 MB
RDRAM
non-ECC
P1642N3
and
P1642T
Dual
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
SDRAM
100 MHz
non-ECC
10 GB
Ultra
ATA/66
5.4 krpm
Matrox
Millennium
G250 8 MB
SGRAM video
memory fitted
P1655N3
and
P1655T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
RDRAM
non-ECC
15 GB
Ultra
ATA/66
7.2 krpm
Product
Number1
Cache
Memory
Std.
RAM
Hard
Drive
Video
Controller
Multi-media LAN
Ka_sh_1.bk Page 2 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-3
5
HP Kayak XM600 733 MHz - 133 FSB (CPL:01/2000 )
D8366N
and
D8366T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
RDRAM
non-ECC
9.1 GB
7.2 krpm
SCSI
3Dlabs Oxygen
GVX1, 32 MB
SGRAM video
memory fitted
48✕IDE
CD-ROM
1HP
10/100
BT PCI
D9539N
and
D9539T
128 MB
SDRAM
100 MHz
non-ECC
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
DVD Drive
D9565N3
and
D9565T
P1643N3
and
D1643T
10 GB
Ultra
ATA/66
5.4 krpm
Matrox
Millennium
G250 8 MB
SGRAM video
memory fitted
48✕IDE
CD-ROM
P1644N3
and
D1644T
9.1 GB
7.2 krpm
SCSI
Elsa Synergy II,
32 MB SGRAM
video memory
fitted
P1657N3
and
D1657T
128 MB
RDRAM
non-ECC
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
P1659N3
and
D1659T
Matrox
Millennium
G250 8 MB
SGRAM video
memory fitted
Product
Number1
Cache
Memory
Std.
RAM
Hard
Drive
Video
Controller
Multi-media LAN
Ka_sh_1.bk Page 3 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-4
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
HP Kayak XM600 800 MHz - 133 FSB (CPL:01/2000 )
D9567N3
and
D9567T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
SDRAM
100 MHz
non-ECC
30 GB
Ultra
ATA/66
7.2 krpm
Elsa Synergy II,
32 MB SGRAM
video memory
fitted
48✕IDE
CD-ROM
1HP
10/100
BT PCI
P1646N3
and
P1646T
256 MB
SDRAM
100 MHz
non-ECC
15 GB
Ultra
ATA/66
7.2 krpm
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
P1649N3
and
P1649T
Elsa Synergy II,
32 MB SGRAM
video memory
fitted
P1651N3
and
P1651T
128 MB
RDRAM
non-ECC
9.1 GB
7.2 krpm
SCSI
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
HP Kayak XM600 866 MHz - 133 FSB (CPL:01/2000 )
P1647N
and
P1647T
Pentium
III with
i256 KB of
L2 cache
memory
128 MB
RDRAM
non-ECC
9.1 GB
7.2 krpm
SCSI
Matrox
Millennium
G400-Dual
16 MB video
memory fitted
48✕IDE
CD-ROM
1HP
10/100
BT PCI
All models are supplied with a 1.44 MB Floppy Disk Drive, an integrated IDE
controller, and an integrated audio chip on the system board.
HP Kayak XM600 7/xxx Exp Base Models (CPL: 01/2000 )
D8500AV V-Exp Base Model IDE
D8809AV V-Exp Base Model SCSI
1. Unless otherwise mentioned, the operating system for the HP Kayak XM600 Desktop PC
Workstations is Windows NT4.0
2. FSB = Front Side Bus
3. HP Kayak XM600 Desktop PC Workstation supplied with a Windows 2000 operating
system.
Product
Number1
Cache
Memory
Std.
RAM
Hard
Drive
Video
Controller
Multi-media LAN
Ka_sh_1.bk Page 4 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-5
5
Supported Accessories
Memory Upgrades
RDRAM 64 MB non-ECC main memory D9500A
RDRAM 128 MB non-ECC main memory D9502A
RDRAM 256 MB non-ECC main memory D9503A
RDRAM 64 MB ECC main memory D9504A
RDRAM 128 MB ECC main memory D9506A
RDRAM 256 MB ECC main memory D9507A
SDRAM164 MB 100 MHz non-ECC main memory D6502A
SDRAM1128 MB 100 MHz non-ECC main memory D6503A
SDRAM1256 MB 100 MHz non-ECC main memory D9525A
SDRAM1512 MB 100 MHz non-ECC main memory D6742B
SDRAM memory modules for the US only:
SDRAM164 MB 100MHz main memory (non-ECC) D6502T
SDRAM1128 MB 100MHz main memory (non-ECC) D6503T
SDRAM1256MB 100MHz main memory (non-ECC) D9525T
SDRAM1512 MB 100 MHz non-ECC main memory D6742A
Dual Processor Kits2
Intel Pentium III Slot 1, 500 MHz, 100 MHz FSB, 512 KB D9448A
Intel Pentium III Slot 1, 533 MHz, 133 MHz FSB, i256 KB D9450A
Intel Pentium III Slot 1, 600 MHz, 133 MHz FSB, i256 KB D9452A
Intel Pentium III Slot 1, 667 MHz, 133 MHz FSB, i256 KB D9453A
Intel Pentium III Slot 1, 733 MHz, 133 MHz FSB, i256 KB D9659A
Intel Pentium III Slot 1, 800MHz, 133 MHz FSB, i256 KB D8854A
Intel Pentium III Slot 1, 866 MHz, 133 MHz FSB, i256 KB P1551A
Mass Storage—Hard Disk Drives
10.0 GB Ultra ATA/66 hard disk, 5.4k rpm D9623A
15.0 GB Ultra ATA/66 hard disk, 7.2k rpm D7517A
30.0 GB Ultra ATA/66 hard disk, 7.2k rpm D9804A
9.1 GB UW-SCSI hard disk, 7.2k rpm D6938B
9.1 GB UW-SCSI hard disk, 10k rpm D8608A
18.1 GB UW-SCSI hard disk, 10k rpm D8609A
Removable Mass Storage
48X max-speed IDE CD-ROM drive (single) D9444A
8x Video IDEO DVD-ROM drive D7521A
4X IDE CD-Writer Plus D9524A
Ka_sh_1.bk Page 5 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-6
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
Input Devices
HP Windows®keyboard C4735A
HP multimedia keyboard C4742A
HP standard 2-button mini-din mouse C3751B
HP mouse with scrolling wheel C4736A
HP cordless scrolling mouse C4740A
Security
HP Master Pass Key System kit D6655B
HP Master Pass Key D6658B
HP Locks x50 for Master Pass Key System D6659A
HP ProtectTools Smart Card Reader kit D8436A
LAN Interfaces
HP 10/100 PCI Ethernet Adapter (single) D7508A
HP 3COM FastEtherlink XL 3C905C-TX PCI NIC3(single) D7522A
HP Intel Pro/100+ Management Adapter (single) D7506A
Adapters
Ultra II SCSI adapter card D9663A
Video Cards
Matrox Millennium G400-Dual video card D9521A
Elsa Synergy II video card D9522A
3Dlabs Oxygen GVX1 video card D9523A
Video Memory
8 MB SGRAM SODIMM for Matrox G200/250 AGP graphics card D9527A
Audio and Multimedia
Labtech amplified speakers (10 WRMS) (single) D4545A
Labtech amplified speakers (4 WRMS) (single) D6861A
Standard headset D8387A
Miscellaneous
USB Hub accessory kit D6804A
1. All models shipped with SDRAM memory should be converted to RDRAM memory.
Consult HP Support for further information.
2. Dual Processor Kits include: processor, voltage regulator module and heatsink.
3. NIC = Network Internet Connector
Ka_sh_1.bk Page 6 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-7
5
System Board Connectors, BIOS, and Memory
System Board Switches,
refer to page 8 for
default settings
Secondary IDE
Primary IDE
AGP PRO
PCI 1
CD_IN
PCI 2
PCI 3
PCI 4
PCI 5
RIMM 1
SDRAM Memory Expansion Card Connector
CPU Fan 2
Main Fan
CPU FAN 1
AUX Power
Power
PCI Fan (MT only)
SPKR
AUX_IN
Wake-On LAN (WOL)
Floppy Disk
Drive
HDD Thermal
Sensor
(MT only)
Status Panel
Battery
SCSI LED
Package Intrusion
Processor 2 Connector
Processor 1 Connector
RIMM 0
Line Out
Line In
MIC
Midi & Audio
Serial Port A
Serial Port B
(Both ports are
stacked with the
Parallel Port)
Two USB
Mouse (upper) &
Keyboard (lower)
Ka_sh_1.bk Page 7 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-8
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
System Board Switches
NOTE: A limited number of early HP Kayak XM600 system
boards have 20 configuration switches. Switches 11-20
are reserved and should be set as follows: 12,13,15 and
16 to ON, others to OFF
BIOS History
For the latest BIOS, the flasher utility program, and the BIOS history refer to the
HP World Wide Web site. The BIOS is in the form IC.xx.yy.zz
yy= BIOS version number
zz = is the selected language to be downloaded
Switch Default Function
1OFF
Reserved 1-5. Do Not Change Default Settings.
2OFF
3OFF
4OFF
5OFF
6Disables keyboard power-on.
ON Enables keyboard power-on.
7 OFF Enables normal mode.
Enables the BIOS recovery mode at next boot.
8 OFF Retains CMOS memory.
Clears CMOS memory at next boot.
9 OFF Enables User and System Administrator passwords.
Clears the passwords at next boot.
10 ON Selects the chassis type. ON = Minitower.
OFF = Desktop.
http://www.hp.com/go/kayaksupport
Ka_sh_1.bk Page 8 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-9
5
Installing a Dual Processor / Replacing a Processor
HP Kayak XM600 Desktop PC Workstations are supplied with a Pentium III
processor and an integrated VRM (Voltage Regulator Module) on the system
board. A separate VRM is not required.
Single processor models can be upgraded to dual processor systems by
installing a second processor accessory in the vacant processor slot.
The second processor must be a processor of the same type, speed and level-2
cache memory capacity as the first. Remove the processor termination card
from the processor connector slot (CPU 2). Carefully push down onto the
processor until you hear two clicks as the retention mechanism pops back,
thereby locking the processor into the processor connector.
After installation of a second processor, use the HP DualExpress! application
when upgrading Windows NT from a single-processor to a multi-processor
system. This application is included with the HP processor accessory kit.
NOTE: The processor type and speed is automatically
recognized by the BIOS. This means that no particular
switch setting changes are required.
Main Memory
The HP Kayak XM600 model suports onboard RIMM™ sockets supporting
RDRAM modules.
Some earlier HP Kayak XM600 models were also shipped with a Memory
Expansion Card supporting SDRAM memory modules. This type of memory
should be replaced with RDRAM memory.
SDRAM Modules
NOTE: All models shipped with SDRAM memory should be
converted to RDRAM memory. Consult HP Support for
further information.
RDRAM Modules
There are two available RIMM sockets (RIMM0 and RIMM1) on the system
board. If RIMM1 socket is unused, it must contain a “RDRAM Continuity
Module”.
Ka_sh_1.bk Page 9 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-10
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
The SDRAM Memory Expansion Card socket always contains a “RDRAM
Terminator Module”.
Memory upgrades are available in 64 MB, 128 MB or 256 MB ECC or non-ECC
RDRAM modules.
When upgrading memory, ensure that:
❒SDRAM Memory Expansion Card socket contains a “RDRAM Terminator
Module”.
❒Modules should be first installed in RIMM0 socket, then RIMM1.
❒If RIMM1 socket is not used, “RDRAM Continuity Module”.
RDRAM
Terminator Module
System board edge
Second RIMM module, or
RDRAM Continuity
Module if unused
Processor 2, or processor
terminator card if unused
Processor 1
First RIMM module
Ka_sh_1.bk Page 10 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-11
5
Mass Storage Device Guide Rails
Attached on the side of the front access cage, additional guide rails are available
for mass storage device installations. Depending on the device to be installed,
dedicated guide rails are required and are easily recognized by their distinct size
and color.
The following table indicates the device, location, and required rails.
Device to be
Installed
Location Required
Rails
Installing the Rails
3.5-inch device
(hard disk drive)
3.5-inch
internal
shelf (two
shelves)
Short blue left
and right rails
Insert the guide rail labeled “L”
on the left-hand side (cable
connectors facing towards you
and positioned at the bottom),
and the guide rail “R” on the
right-hand side of the hard disk
drive.
5.25-inch device
(CD-ROM, etc.)
5.25-inch
front
access
cage shelf
Long green rails There is no specific side to
which these guides must be
installed. However, they must
be inserted in the two holes
located at the bottom of the
drive.
Third 3.5-inch hard disk
drive
Hard disk drive is mounted on
the pre-installed 5.25-inch
hard disk drive tray and
secured to the tray using the
supplied four screws.
3.5-inch device
(zip drive, etc.)
Short green left
and right rails
Carefully break off the metal
plate from the chassis. Insert
the guide rail labeled “L” on
the left-hand side (cable
connectors facing towards you
and positioned at the top), and
the guide rail “R” on the right-
hand side of the hard disk
drive.
Ka_sh_1.bk Page 11 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-12
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
Parts and Part Numbers
1
1b
1c
2a
2b
2d
3
4
7
8
1d
1a
2c
5
6
Ka_sh_1.bk Page 12 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-13
5
Parts List
Item Description Replacement
Part Number
Exchange
Part Number
1 Chassis assembly (including top cover):
a Main fan assembly
b I/O board, fan and speaker assembly
c LCD status panel
d Support kit (only two items are shown
in the graphic), including:
• HP logo XM600
• bumper feet
•coverscrews
• anti-intrusion switch
•HDDthermalsensor
• system board bracket and screw
• upper front bezel (shown in graphic)
• lower front bezel (shown in graphic)
• 5 ¼-inch filler panel, 3½-inch floppy
panel, 3½-inch cover filler, spare I/O
panel
• two pair of 5¼-inch long green guide
rails
• one pair 3½-inch L&R HDD short blue
guide rails
• one pair 3½-inch L&R FDD short green
guide rails
Not shown in graphic.
Cover lock assembly
Qty
1
4
2
1
1
1
1
1
1
2
1
1
5065-0435
5065-0483
5065-0484
5064-9162
5065-0433
5064-2645
—
—
—
—
—
—
2 Cables:
a IDE cable kit (HDD, CD-ROM, FDD)
b SCSI cable
c SCSI LED cable
d CD-ROM audio cable
5064-9764
5184-1501
5183-9401
5182-1857
—
—
—
—
3 System board See system board parts list
4 Power supply unit 0950-3628 —
5 Processor Connector Termination Card 5064-9725 —
6 SDRAM1Memory Expansion Card 5064-0480 —
7 RDRAM Continuity Module D8660-63001 —
8 RDRAM Termination Module 5065-1281 —
Ka_sh_1.bk Page 13 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-14
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
Available Parts that are not shown in the graphic on page 12.
Floppy disk drive (1.44) D2035-60293 —
Ultra 2 SCSI card (Symbios 8952U) 5064-7466 —
Standard hard disk drive2
9.1 GB SCSI 7.2k rpm D6463-63001 D6463-69001
15 GB IDE Ultra ATA/66 7.2k rpm D9803-63003 D9803-69003
10 GB IDE Ultra ATA/66 7.2k rpm D9805-63001 D9805-69001
30 GB IDE Ultra ATA/66 7.2k rpm D9804-63003 D9804-69003
DVD, CD-R and CD-ROM drives:
DVD 8X IDE video drive D4388-63002 D4388-69002
CD-R 48X IDE drive D4389-63001 —
Graphic interfaces:
aElsa Synergy II, AGP
b Matrox Millennium G400-Quad, AGP
c Matrox Millennium G250, AGP
d 3Dlabs Oxygen GVX1, AGP
The following Graphics Interfaces are also
available, but not shown:
aElsa Gloria II, AGP
b Elsa Synergy II, PCI3
c Appian Jeronimo Pro Quad, PCI
Appian Jeronimo Pro cable
d Matrox Quad G200-Quad, PCI
Matrox Quad G200 cable kit (contains two
Y-cables)
5064-9794
5064-9194
5064-9191
5064-9793
5184-3811
5065-0468
5064-9798
5184-3831
5065-2514
5184-3830
D7992-69501
D8924-69501
—
D8366-69501
D9543-69501
—
D9534-69501
—
D9536-69501
—
HP 10/100 BaseT LAN card 5064-9746 —
Input Devices:
a Three-button mouse
b Enhanced mouse with scroll/zoom wheel
C4728-60101
C4736-60101
—
—
European power cord (220 V) 8120-xxxx —
Multimedia keyboard C4742-601xx —
CR2032 battery (3V) 1420-0356 —
1. All models shipped with SDRAM memory should be converted to RDRAM memory. Consult
HP Support for further information.
2. For optional disk drive information, refer to the Accessory Service Handbook.
3. Should only be used in conjunction with an Elsa Synergy II AGP video card for dual
monitor display.
Parts List
Item Description Replacement
Part Number
Exchange
Part Number
Ka_sh_1.bk Page 14 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
HP Kayak XM600 Minitower PC Workstations
5-15
5
System Board
Description Repl.
Part
Number
Exchange
Part
Number
System board:
XM600 7/xxx system board D8350-63002 D8350-69002
Processors:
Intel Pentium III 500 MHz, 100 MHz FSB, 512 KB cache D7947-63001 D7947-69001
Intel Pentium III 533EB MHz, 133 MHz FSB, 256 KB cache D9026-63001 D9026-69001
Intel Pentium III 600EB MHz, 133 MHz FSB, 256KB cache D9452-63001 D9452-69001
Intel Pentium III 667 MHz, 133 MHz FSB, 256 KB cache D9453-63001 D9453-69001
Intel Pentium III 733 MHz, 133 MHz FSB, 256 KB cache D9659-63001 D9659-69001
Intel Pentium III 800 MHz, 133 MHz FSB, 256 KB cache D8854-63001 D8854-69001
Intel Pentium III 866 MHz, 133 MHz FSB, 256 KB cache P1551-63001 P1551-69001
Main memory modules
For RIMM sockets:
1 x 64 MB, PC700 non-ECC RDRAM
1 x 128 MB, PC700 non-ECC RDRAM
1 x 256 MB, PC700 non-ECC RDRAM
For DIMM1sockets:
1 x 64 MB, 100 MHz non-ECC SDRAM
1 x128 MB, 100 MHz non-ECC SDRAM
1. All models shipped with SDRAM memory should be converted to RDRAM memory. Consult
HP Support for further information.
5065-0489
5065-0491
5065-0493
D6502-63001
D6503-63001
—
—
—
—
D6503-69001
Manuals and Documentation
Description Part Number
User’s Guide - English only D8369-90001 Paper document and
electronic file
Troubleshooting Guide electronic file only
Technical Reference Manual electronic file only
Online documentation can be downloaded from:
http://www.hp.com/go/kayaksupport
Software
Image Creation and Recovery CD-ROM for
Windows NT
5011-6693-xx1
1. xx = Language code
—
Ka_sh_1.bk Page 15 Thursday, June 15, 2000 7:27 PM

HP Kayak XM600 Minitower PC Workstations
5-16
HP Kayak XM600 Minitower PC Workstations
Minitower
PC Workstations
5
Notes: _____________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Ka_sh_1.bk Page 16 Thursday, June 15, 2000 7:27 PM

Beep, POST, and Error Codes A-1
A
A
Beep, POST, and Error Codes
Beep Codes
If an error occurs during the POST, which prevents the PC Workstation from
starting, and before the display device has been initialized, a series of beep
codes are issued. Beep codes indicate that a fatal error has occurred and can be
reported one after another if there is more than one detected error. In this case,
the first detected error is the most important.
These codes are useful for identifying the error when the system is unable to
display the error message.
Ka_sh_1.bk Page 1 Thursday, June 15, 2000 7:27 PM

A-2 Beep, POST, and Error Codes
A
Beep Codes for the HP Kayak XU800
Number
of
Beeps
Description Action to Take...
1 The memory refresh
circuitry is faulty.
Check that:
• Memory is installed correctly.
• Correct memory modules are being used.
If the error still occurs, replace the memory.
2 Parity error in the base
memory (the first 64 KB
block) of memory.
3 Memory error.
4 Clock error. • Check that the system board is correctly
cabled (power cables, processor and
terminator).
If the error still occurs, replace the system
board.
5 Processor test error. Check that:
• Processor is correctly installed.
• Termination card installed in processor
slot 2 in a single processor system.
If the error still occurs, replace:
1Processor.
2 system board.
6 Input/Output (I/O) error. • Keyboard is connected.
• PCI card is installed correctly.
• Termination card installed in processor
slot 2 in a single processor system.
7 The processor on the
system board generated
an error.
• There is an installed processor(s).
• Processor(s) is correctly installed in the
processor slot(s).
• Two installed processors have the same
cache size (256 k).
• Termination card is installed in processor
slot 2 in a single processor system.
• VRM is installed in the VRM socket in a
dual processor system.
If the error still occurs, replace the system
board.
8 The system video card is
either missing or faulty.
This is not a fatal error. Check that the video
card is correctly installed and cabled. If
missing, install the video card. If the error
still occurs, replace it with a known working
video card.
Ka_sh_1.bk Page 2 Thursday, June 15, 2000 7:27 PM

Beep, POST, and Error Codes A-3
A
9 The BIOS Checksum
value does not match the
value encoded in the
BIOS.
Perform the following actions in this order:
1PressF2 to enter the Setup program,
then F9 to load the default BIOS settings.
2 Clear the CMOS.
3 Flash the BIOS.
If the error still occurs, replace the system
board.
10 The CMOS RAM has
failed.
Perform the following actions in this order:
1PressF2 to enter the Setup program,
then F9 to load the default BIOS settings.
2 Clear the CMOS.
3 Flash the BIOS.
If the error still occurs, replace the system
board.
11 The cache memory test
failed.
Replace the processor(s).
Number
of
Beeps
Description Action to Take...
Ka_sh_1.bk Page 3 Thursday, June 15, 2000 7:27 PM