HP TFT5110R User manual

HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
HP TFT5110R
User Guide
December 2002 (Second Edition)
Part Number 292491-002

HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided “as is” without warranty of
any kind and is subject to change without notice. The warranties for HP products are set forth
in the express limited warranty statements accompanying such products. Nothing herein
should be construed as constituting an additional warranty.
HP TFT5110R User Guide
December 2002 (Second Edition)
Part Number 292491-002

HP TFT5110R User Guide iii
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
Contents
About This Guide
Important Safety Information ........................................................................................... vii
Symbols on Equipment..................................................................................................... vii
Rack Stability..................................................................................................................... ix
Symbols in Text.................................................................................................................ix
Getting Help........................................................................................................................ x
Technical Support ........................................................................................................ x
HP Website.................................................................................................................. xi
Authorized Reseller..................................................................................................... xi
Reader’s Comments........................................................................................................... xi
Chapter 1
Overview
Features............................................................................................................................1-2
Options............................................................................................................................. 1-2
Front Panel Components..................................................................................................1-3
Chapter 2
Installation
Kit Contents.....................................................................................................................2-1
Required Tools.................................................................................................................2-1
Installing the TFT5110R..................................................................................................2-2
Accessing the TFT5110R ................................................................................................2-8
Removing the TFT5110R ................................................................................................2-8

Contents
iv HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
Chapter 3
Operation
Main Menu...................................................................................................................... 3-2
Mode Setting............................................................................................................. 3-2
Global Setting ........................................................................................................... 3-3
OSD Default Menu ......................................................................................................... 3-3
Auto Setup ................................................................................................................ 3-3
Brightness ................................................................................................................. 3-4
Contrast..................................................................................................................... 3-4
Image Adjust............................................................................................................. 3-5
Languages............................................................................................................... 3-12
OSD Settings .......................................................................................................... 3-13
Settings Restored on a Global Basis....................................................................... 3-16
Settings Restored on a Mode Basis ........................................................................ 3-16
Information ............................................................................................................. 3-17
Status Bar ......................................................................................................................3-17
Chapter 4
Care and Maintenace
Maintenance and Shipping Guidelines............................................................................ 4-1
Cleaning the Display................................................................................................. 4-2
Shipping the TFT5110R.................................................................................................. 4-2
Moving the TFT5110R Installed in a Rack..................................................................... 4-3
Appendix A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers.............................................................A-1
Federal Communications Commission Notice................................................................A-1
Class A Equipment ...................................................................................................A-2
Class B Equipment ...................................................................................................A-2
Modifications............................................................................................................A-3
Cables .......................................................................................................................A-3
Declaration of Conformity for Products Marked with the FCC Logo,
United States Only....................................................................................................A-3
Canadian Notice (Avis Canadien)...................................................................................A-4
Class A Equipment ...................................................................................................A-4
Class B Equipment ...................................................................................................A-4

Contents
HP TFT5110R User Guide v
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
Mouse Compliance Statement ........................................................................................ A-4
European Union Notice .................................................................................................. A-5
Japanese Notice .............................................................................................................. A-6
Taiwanese Notice............................................................................................................ A-6
Appendix B
Electrostatic Discharge
Grounding Methods ........................................................................................................ B-2
Appendix C
Power Cord Requirements
General Requirements..................................................................................................... C-1
Country-Specific Requirements...................................................................................... C-2
Appendix D
Specifications

HP TFT5110R User Guide vii
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
About This Guide
This guide provides step-by-step instructions for installation and reference
information for operation for the HP TFT5110R.
Important Safety Information
Before installing this product, read the Important Safety Information document
included with the server.
Symbols on Equipment
The following symbols may be placed on equipment to indicate the presence of
potentially hazardous conditions:
WARNING: This symbol, in conjunction with any of the following symbols,
indicates the presence of a potential hazard. The potential for injury exists if
warnings are not observed. Consult your documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric
shock hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not
open this enclosure. Refer all maintenance, upgrades, and servicing to
qualified personnel.

About This Guide
viii HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
This symbol indicates the presence of electric shock hazards. The area
contains no user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not
open this enclosure
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into this
receptacle.
This symbol indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
These symbols, on power supplies or systems, indicate that the
equipment is supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock,
remove all power cords to completely disconnect power from the
system.
Weight in kg
Weight in lb
This symbol indicates that the component exceeds the recommended
weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manual material handling.

About This Guide
HP TFT5110R User Guide ix
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents essential information to explain a concept
or complete a task.
NOTE: Text set off in this manner presents additional information to emphasize or supplement
important points of the main text.

About This Guide
x HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
Getting Help
If you have a problem and have exhausted the information in this guide, you can get
further information and other help in the following locations.
Technical Support
In North America, call the HP Technical Support Phone Center at 1-800-652-6672.
This service is available 24 hours a day, 7 days a week. For continuous quality
improvement, calls may be recorded or monitored. Outside North America, call the
nearest HP Technical Support Phone Center. Telephone numbers for worldwide
Technical Support Centers are listed on the HP website, www.hp.com.
Be sure to have the following information available before you call HP:
• Technical support registration number (if applicable)
• Product serial number
• Product model name and number
• Applicable error messages
• Add-on boards or hardware
• Third-party hardware or software
• Operating system type and revision level

About This Guide
HP TFT5110R User Guide xi
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: a-frnt
Codename: Pug Part Number: 292491-002 Last Saved On: 10/31/02 1:59 PM
HP Website
The HP website has information on this product as well as the latest drivers and flash
ROM images. You can access the HP website at www.hp.com.
Authorized Reseller
For the name of your nearest authorized reseller:
• In the United States, call 1-800-345-1518.
• In Canada, call 1-800-263-5868.
• Elsewhere, see the HP website for locations and telephone numbers.
Reader’s Comments
HP welcomes your comments on this guide. Please send your comments and
suggestions by e-mail to [email protected].

HP TFT5110R User Guide 1-1
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: b-ch1 Overview
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:17 AM
1
Overview
The HP TFT5110R is a rack-mountable 1U flat panel monitor with space available to
add a switch behind the unit. The TFT5110R uses a 15-inch (38.1-cm) color active
matrix Thin Film Transistor (TFT) Liquid Crystal Display (LCD).
Figure 1-1: TFT5110R

Overview
1-2 HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: b-ch1 Overview
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:17 AM
Features
The TFT5110R has the following features:
• Display—15-inch (38.1-cm) viewable area display, viewable with rack doors
closed (in most cases)
• Resolution—1024 x 768 resolution at 60 Hz, plus full-screen support for
lower resolutions
• VGA connector—Plugs into a standard VGA connector; does not require a
special graphics adapter card
• Plug and Play—Plug and Play capability if supported by the system
• On-screen Display (OSD)—Available in ten languages
• Power supply—12V DC/40 W
• Power on/off switch—Powers the display on and off
• OSD scroll up button—Used to scroll up in the OSD menu and adjust the
function
• OSD scroll down button—Used to scroll down in the OSD menu and adjust the
function
• OSD activation button—Launches, selects, and exits OSD menus
Options
• 1U Telco Rack Option Rails (PN:257934-B21)—Allows the user to install the
TFT5110R in third-party racks
• Adjustable Rack Rails (PN:257935-B21)—Allows the user to install the
TFT5110R in third-party racks

Overview
HP TFT5110R User Guide 1-3
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: b-ch1 Overview
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:17 AM
Front Panel Components
1
2
3
4
Figure 1-2: TFT5110R front panel components
Item Description
1 Power on/off switch
2 OSD scroll up button
3 OSD scroll down button
4 OSD activation button

HP TFT5110R User Guide 2-1
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
2
Installation
This chapter discusses the installation and setup procedures for installing the
TFT5110R into a rack.
Kit Contents
Below are the items and quantities required for assembly:
• M-6 cage nuts (4)
• M-6 screws (8)
• 6-32 screws (12)
• Mounting rails with slides (2)
• Cable management arm assembly (1)
• TFT5110R (1)
• Lock plates (2)
This kit may contain extra pieces of hardware for your convenience.
Required Tools
You need the following:
• Phillips screwdriver
• T-15 Torx screwdriver

Installation
2-2 HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
Installing the TFT5110R
To install the TFT5110R:
1. Determine the appropriate rack position for the TFT5110R.
2. Measuring from the top of the component below the desired position, use the
template on the front and rear of the rack frame to mark the attachment points for
the mounting rails and rear cage nuts.
NOTE: When using the template on the rear of the rack, mark the rack at the top of the
rack template to help align the next component.
1
Figure 2-1: Measuring with the 1U template

Installation
HP TFT5110R User Guide 2-3
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
3. Install the cage nuts and mounting rails to the rack.
a. Insert one cage nut into the hole marked with the rack template on the rear of
the rack (1).
b. Hook the rail-mounting bracket tabs into the appropriate holes on the rear of
the rack, and insert one M-6 screw (2).
c. Align the front mounting rail holes to the rack, and insert two M-6
screws (3).
d. Repeat the steps above to install the other mounting rail.
2
13
Figure 2-2: Installing the cage nuts and mounting rails

Installation
2-4 HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
4. Attach the cable management arm assembly to each mounting rail, being sure
that the cable access hole faces the right side of the rack.
NOTE: The cable access hole must be positioned on the right side of the rack to allow
appropriate routing of the cables.
a. Extend the mounting rail to allow the cable management arm assembly to be
inserted.
b. Align the screw holes on the cable management arm assembly with the screw
holes on the mounting rails (1).
c. Insert one 6-32 screw on each side (2).
d. Tighten the screws (3).
1
3
2
Figure 2-3: Attaching the cable management arm
assembly

Installation
HP TFT5110R User Guide 2-5
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
5. Install the TFT5110R on the mounting rails:
a. Fully extend the slides until they lock into place.
b. Press the release mechanism and remove the inner slide brackets (1).
c. Attach the inner slide brackets to the metal tray using two screws on
each side (2).
d. Align the inner slide brackets (attached to the TFT5110R) with the slides.
e. Push the TFT5110R into the rack until the inner slide brackets and slides
lock into place (3).
2
3
2
1
Figure 2-4: Installing the TFT5110R

Installation
2-6 HP TFT5110R User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
6. Attach the cable management arm assembly to the rear of the TFT5110R with
two 6-32 screws.
Figure 2-5: Attaching the cable management arm
7. Route the power and video cables through the cable management arm assembly
and mounting rail opening.
Figure 2-6: Routing the cables

Installation
HP TFT5110R User Guide 2-7
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installation
Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 10:16 AM
8. Insert the TFT5110R into the rack frame.
a. Slide the locking mechanism to unlock the slides (1).
CAUTION: If the TFT5110R is not properly aligned with other rack-mounted
devices when installed, cosmetic damage to the top pf the unit can occur due to
interference. Leave the protective sheet on the unit while making the appropriate
adjustments to the M-6 screw on the mounting rails.
b. Carefully push the TFT5110R into the rack (2).
1
1
2
2
Figure 2-7: Sliding the TFT5110R into the rack