User Manual
5
The projector does not turn
on after pressing the power
button for more than 8 seconds.
Ensure the battery is fully charged.
The surface temperature of
the projector is hot .
It is normal for this projector to
generate moderate heat during
operation.
The projected image is blurred. 1. Adjust the focus by using focus
wheel.
2. Check if the projection lens is
dirty, clean it if required.
The projector does not display
when connecting to a
notebook PC.
1.Check if the HDMI cable is
plugged correctly.
2. Make sure the PC has been
switched to projector display.
Troubleshooting
Symptom Check Point
If the projector is running slow,
freezing, crashing or locking up
during the operation, you can
try to insert a slim, pointy object
into the reset hole to trigger a
hardware reset.
If your projector does not seem to be functioning properly, please check the
following before you contact an authorized service center.
Abnormal performance
EN
