HPE 12901E Assembly instructions

MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HPE 12901E Switch Chassis(JH951A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sqcm
5
Batteries
All types including standard alkaline and lithium
coin or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame
Retardantsweighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.

MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at MF877-01
Tool Description
Tool Size (if
applicable)
Screw driver
2#
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Extract all of the part 2.
2. Unscrew the screws on part 3, and then remove part 3.
3. Unscrew the screws on part 7, and then remove part 7.
4. Remove part 3 and part 5 from chassis 1.
5. Remove part 4 and part 6 from chassis 1.
6. Remove part 8 and part 9 from chassis 1.
7. Unscrew the screws on part 10, and then remove part 10.
8. Unscrew the screws on pcb 11, and then remove pcb 11.
9. Unscrew the screws on pcb 12, and then remove pcb 12.
10. Unscrew the screws on part 1-1, and then remove part 1-1.
11. Unscrew the screws on part 1-2, and then remove part 1-2.
12. Unscrew the screws on part 1-3, and then remove part 1-3.
13. Unscrew the screws on part 1-4, and then remove part 1-4.
14. Unscrew the screws on part 1-4-1, and then remove part 1-4-1.
15. Unscrew the screws on part 1-4-2, and then remove part 1-4-2.
16. Unscrew the screws on pcb 15, and then remove pcb 15.
17. Unscrew the screws on part 1-4-3, and then remove part 1-4-3.
18. Unscrew the screws on part 1-4-4, and then remove part 1-4-4.
19. Unscrew the screws on pcb 14, and then remove pcb 14.
20. Unscrew the screws on pcb 13, and then remove pcb 13.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Figure 1 Treatments to the product (rear view)

MF877-00 Page 3
Template Revision A
HPE instructions for this template are available at MF877-01
1
Figure 2 Treatments to the product（front view）
Figure 3 Treatments to the product（front view）

MF877-00 Page 4
Template Revision A
HPE instructions for this template are available at MF877-01
Figure 4 Treatments to the product（front view）
Figure 5 Treatments to part 1-4

MF877-00 Page 5
Template Revision A
HPE instructions for this template are available at MF877-01
Figure 6 Treatments to product