HPE FlexNetwork MSR958 User manual

The installation tools are not provided with the router. Prepare them yourself.
Installation tools
Installation accessories Rack-mounting the router
!
!
Part number:5200-1205
HPE FlexNetwork MSR958 Routers Quick Start-6W100
Grounding
cable
Rubber feet
Cage nut
M6 screw M4 screw
Mounting
brackets
Ruler Wire-stripping pliers Marker
Diagonal pliers Flathead screwdriver Phillips screwdriver
ESD wrist strap
The router is not provided with mounting brackets. Purchase a JH317A
Mounting brackets yourself.
Applicable products
HPE MSR958 Routers (JH300A/JH301A).
!
1
2
Install cage nuts.
Attach the mounting brackets to the router.
M6
3.0±0.3 N.M

Workbench-mounting the router
Attach the rubber feet to the holes in the router bottom. Then place the router on
the workbench upside up.
3
4
Connecting a fiber port
Mount the router in the rack.
Installing an SD card
Remove the SD card slot cover, insert the SD card into the slot, and reinstall the
cover.
The device supports only JH318A SD cards. No JH318A SD cards are
provided with the device. Purchase a JH318A SD card as needed.
Reinstall the cover after the installation.
!
1 2
Remove the dust plug from the fiber port, insert the transceiver module into the
fiber port, and connect the optical fibers to the port.
1 2
3

5
6
Connecting an Ethernet cable
Connecting the grounding cable to the router
Correctly connecting the grounding cable is crucial to lightning protection and
EMI protection. Attach the ring terminal provided with the router to the
grounding cable. Make sure the grounding cable is reliably grounded.
!
1 2
Connecting the power adapter
Before connecting the power adapter, make sure the router is reliably
grounded.
To avoid bodily injury, first connect the power adapter to the router and then to
the equipment-room power supply system.
!
Supplying power to a device through PoE
Only the JH301A router supports PoE.
!
To supply power to a device through PoE, use an Ethernet cable to connect the
router to the device.