HPE ProLiant DL360 Gen10 Installation instructions

MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HPE ProLiant DL360 Gen10
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HPE products to remove components and materials requiring selective treatment,
as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in
product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
7
Batteries
All types including standard alkaline and lithium
coin or button style batteries
2
Mercury-containing components
For example, mercury in lamps, display
backlights, scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with
gas discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
5
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame
Retardants weighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and
toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
NA
Components and waste containing asbestos
0

MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at MF877-01
Item Description
Notes
Quantity
of items
included
in
product
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Screwdriver Bits
(T-10)
Description #2 Screwdriver Bits
(T-15)
Description #3 Screwdriver Bits
(T-30)
Description #4 Screwdriver Bits
Sleeve
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1.

MF877-00 Page 3
Template Revision A
HPE instructions for this template are available at MF877-01
2.
3.
4.
5.
6.

MF877-00 Page 4
Template Revision A
HPE instructions for this template are available at MF877-01
7.
8.
9. Remove Electrolytic Capacitors
Model:HSTNS-PD60
Remove capacitor and battery

MF877-00 Page 5
Template Revision A
HPE instructions for this template are available at MF877-01
Model:HSTNS-PD44-1
Remove capacitor
Model:HSTNS-PL45-1
Remove capacitor
Model: HSTNS-PC40-1
Remove capacitor

MF877-00 Page 6
Template Revision A
HPE instructions for this template are available at MF877-01
Model: HSTNS-PL40-1
Remove capacitor
Model: HSTNS-PD40-1
Remove capacitor
Model: HSTNS-PF46-1
Remove capacitor

MF877-00 Page 7
Template Revision A
HPE instructions for this template are available at MF877-01
Model: HSTNS-PL41-1
Remove capacitor
Model: HSTNS-PC41-1
Remove capacitor
Model: HSTNS-PR62
Remove capacitor

MF877-00 Page 8
Template Revision A
HPE instructions for this template are available at MF877-01
Model: HSTNS-PL62
Remove capacitor
Model: HSTNS-PD41-1
Remove capacitor