HPE R8000/3 Assembly instructions

MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HPE R8000/3 R12000/3 RP12000/3 Extended Runtime Module (ERM) / AF434A
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
0
Batteries
All types including standard alkaline and lithium
coin or button style batteries
26
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0

MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at MF877-01
Item Description Notes
Quantity
of items
included
in product
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Phillips Screw driver
#2
Mechanical Pliers
Knife or
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Caution: Avoid wearing jewelry during disassembly that can be exposed for electrical shock.
2. Remove the front panel manually (No tools required).
3. Remove screws from rear panel, cover and disassemble.
4. Cut power cord with a cutting tool.
5. Disassemble batteries (Disable the potential charge from the battery connectors and Disconnect battery terminals.)
6. Disassemble battery unit by removing rear panel and bars on top.
7. Remove bracket on back side of unit
8. Disassemble batteries.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MF877-00 Page 3
Template Revision A
HPE instructions for this template are available at MF877-01
3.2.2 Disassembly battery Module: disconnect harnesses and remove, (marked circles),
with pliers pry battery clips (Marked rectangles). Unscrew and remove bars from the top of
the battery module.

MF877-00 Page 4
Template Revision A
HPE instructions for this template are available at MF877-01
NOTE: The battery should be properly disposed of at a local recycling / reuse
or hazardous waste center.