Huato S210 User manual

Operation Manual
forMultifunctionalDataLogger
HUATO ElectronicCo., LTD.

Contents
Contents ..................................................................................................................................2
1.Introduction .................................................................................................................................1
1.1 Features........................................................................................................................1
1.2 StructureforS210 multifunctionaldatalogger........................................................1
1.3 LCD symbolsinstructions...........................................................................................2
1.4 Instructionsforfunction buttons................................................................................2
1.5 Instructionsforconnectionterminals........................................................................3
2. Operation ofToAnalyzer2Software.......................................................................................4
2.1Quick Start........................................................................................................................4
2.2Connectingthe LoggertoPC........................................................................................4
2.3. Settingupthe LoggertoRecordData.........................................................................5
2.4. ChannelsSetup..............................................................................................................8
2.5. Download datafromthe logger....................................................................................9
2.6. Deleteall thelogsfromthe logger.............................................................................10
2.7. DataListingWindow ....................................................................................................10
2.8. ExportingLoggerData.................................................................................................11
2.9. FileList...........................................................................................................................11

Operation ManualforMultifunctionalDataLogger
1
1.Introduction
S210 multifunctionaldataloggerisdesigned forlong-termsignalmeasurementand recording,
supported bybatteryorexternalACadapter.S210can measurevarioussignals,suchasvoltagesignal
0-10V(S210-V2),currentsignal0~25mA(S210-AS);meanwhile,itcan recordthebinarysignals.The log
intervalcan besetfrom2secondsto24 hours;measurementrangecan beopted from-999 to9999 for
operators.Quiteeasyandconvenienttohandleand savedataeven undertheinterruption ofpower
supply. USB interfaceallowsdownloadingall the datafromdataloggerforanalysisanytime.
1.1Features
Variousinputs: 4-20mA/0-5V/0-10Vetc.
Scopeoftestingsignaland testingvalue can bedeployedaccordingtousers different
requirements.
Adopt highsensitiveprobe, fast responsewithhighaccuracy.
4-20mAinputwith2channelscanrecord2-channelcurrent signals(4-20mA).
Patentedstructuretechnology, easytoinstall battery.Wall-mounted, desk-topand portable.
Operation softwaretogetherwithdataloggertoensurethe dada recordingsystemand the
foreverexistence.
1.2StructureforS210 multifunctional datalogger
1
2
3
4
5
6
7
8
LCD display
②Function buttons
③Signalterminals
④Externalpowerport forDC 9V
⑤USB interface
⑥Batteryback coverand holder
⑦Wall-mounted hole
⑧Strongmagnet (optionalaccessory)

Operation ManualforMultifunctionalDataLogger
2
1.3LCD symbolsinstructions
1
2
3
45
6
7
13
14
8 9 10 11
12
①Alarmsymbolforchannel1
②CH1symbolstandsforchannel1
③TIMEsymbolshowsbeingthe dateand timestatus.
④Alarmsymbolforchannel2
⑤CH2symbolstandsforchannel2
⑥USB connectingsymbolshowsbeingthe PCconnection status.
⑦Powersymboldisplayshowsbeingthe externalpowersupport status.
⑧Batteryindication
⑨LOG symboldisplayshowsbeingthe recordingstatus.
⑩MENU symboldisplayshowsbeingthe dataloggersettingstatus.
MAX symboldisplayshowsbeingthe temperaturemaximumvalue checkingstatus.
⑫MINsymboldisplayshowsbeingthe temperatureminimumvalue checkingstatus.
⑬Temperatureand humidityvaluesdisplaysymbol.
⑭Units symbol, self-defined byusers.
1.4Instructionsforfunctionbuttons
Button:Logfunction button,press thisbutton toenterthe recordingstatuswhen data
loggerisunderstand-byandpress forlongenough5secondsback tostand-bystatus.
Button：Switchbutton amongMAX, MINand current values.
Button：LCD on/offbutton when underthenormalworkingstatus,turnoffthe LCD display
and noinfluencetorecording.
Button：On/offbutton, andinvalidundertherecordingstatus.

Operation ManualforMultifunctionalDataLogger
3
1.5Instructionsforconnectionterminals
1.5.1Two-channelsignalinputsand thethirdchannelcan count the binarysignal.
Feet 1iscurrentnegativeoutput forchannel1
Feet 2iscurrent input forchannel1
Feet 3iscurrentnegativeoutput forchannel2
Feet 4iscurrent input forchannel2
Feet 5isbinarynegativesignalforchannel3
Feet 6isbinarypositivesignalforchannel3
Feet 7isforbatteryvoltageoutput
Feet 8isforexternalpowervoltageoutput
Sensor2 Power
4-20mA
Sensor1 Power
TTL2V
4-20mA

OperationManualofToAnalyzer2Version1.00
4
4
2.OperationofToAnalyzer2Software
2.1Quick Start
Followthe procedurebelowtoquicklystart usingyourdatalogger:
1.Connect the dataloggertoafree USB port on thecomputer.
2.Start ToAnalyzer2softwareon thePC.
3.Fromthe toolbarselect Connect.
4.Thenyoucan setupordownload data, deletedatafromthe logger.
5.Unplugthe cablefromthe logger,then the loggerisinStandbymode.Press button
LOG on the logger, then LOGdisplaysonthescreenand the loggerbeginstorecord.
6.Press LOG forabout fiveseconds, theloggerwillchangetoStandbymode.
Note: The loggerhasthreemodes:
1.LOG: Inthe mode, theloggersamplesand recordsdatatimely.
2.Standby:Inthemode,theloggerstopstosampleand record,buttheLCD displayis
on.
3.OFF:Inthemode,the loggerstopstosampleand record,and theLCD displayisoff.
ToAnalyzercannot connecttothe loggeralso.
2.2ConnectingtheLoggertoPC
Toconnect theloggertothe computer,followthesesteps:
1.Connect the USB cabletothe loggerand toafree USB port on thecomputer.
2.Ifyou areconnectingtheloggertothePCforthe firsttime,the loggerwill
automaticallyberecognized andinstalledon the computer.
3.Start ToAnalyzer2analysissoftware.
4.Click the icon fromthe toolbar, then ToAnalyzerconnectstothe logger.
Ifmorethan oneloggerisconnected toyourcomputeratthe sametime,the programwill
ask youtochooseCOMportmanually.
Note: The windowsoperating systemcannothandleUSB devicesbeing unplugged and
pluggedback too fast.When unplugging thelogger,waitforabout5secondsbefore
plugging itinagain.If you unplug andplug back adevicetoo quickly,the computermay
stop recognizinganyUSBdeviceson thatport.If thishappensyouwillhavetorestart the
computer.ThisisawindowsUSB problemandisnotrelated toToAnalyzer.

OperationManualofToAnalyzer2Version1.00
5
5
2.3. SettinguptheLoggertoRecordData
Tosetthe loggertostartrecordingdata,click the button on thetoolbar,orselect
Setupfromthe menu.
Thesetupoptionswindowisshownbelow.

OperationManualofToAnalyzer2Version1.00
6
6
l:Get current setupinformation fromthe logger.Click thisbutton,andthenthe
oldsetupinformation isshownbelow.
l:Synchronizethe newsetupinformation and PCtime tothe logger.After
changingthe configuration, do notforget clickingthisbutton tomakesurethatthe
newconfiguration iswrotetothe logger.
lName: Givesanametothe logger.
lType: Thedevicetype.
lModel:The devicemodel.
lSerialNo: EveryloggerhasaSNwith10 characters.Thelengthmust be10.
lLOG Intervals(s): The intervalofsamplingand recording.
lLogCount: Thecount ofthelogsthat the loggerhasrecorded.
lMemorycapacity:Thetotalcapacityoftheloggermemory.Onereadingincludestime
and three channels data.

OperationManualofToAnalyzer2Version1.00
7
7
lTemperatureUnit: Theselection ofCand F.
Calibratethelogger: The loggerisfactorycalibrated toan accuracygiven inthe device
specifications.However,theremaybetimeswhen youwishtoadjustthecalibration of
yourlogger.ToAnalyzerprovidesyou withthe abilitytoperformasinglepointoffset
calibration.Thiscalibration can beused toincreasethe accuracyofthe loggerfora
restricted datarange.Theoffsetcannotbe modified indefault. Onlytheauthorized
operatorcan modifyit. Pleasecontact withthe agenttoget thepassword.
lCH1offset: Theoffset ofchannelone.
lCH2offset: Theoffset ofchanneltwo.

OperationManualofToAnalyzer2Version1.00
8
8
2.4. ChannelsSetup
Click the menu bar “Logger”--–“ChannelSetup”:
The ChannelsSetupdialogappears.Inthisdialogue,you cansetuptheinputchannels.
The unitsymbolofthe loggercan bedefined manuallyalso.The symbolsmustbeinthe
set {0-9, a-z,A-Z}.