Huawei Airbridge cBTS3612 User manual

HUAWEI
Airbridge cBTS3612 CDMA Base Station
Installation Manual
Hardware Installation

HUAWEI
Airbridge cBTS3612 CDMA Base Station
Installation Manual
Software Installation & System
Commissioning

1.5cm
7cm Font: Arial 22pt ,
Product name: Bold
5.3cm
0.7cm
Airbridge cBTS3612 CDMA Base Station
Installation Manual
5cm
HUAWEI
4cm
Ver: T2-030448-
20030125-C-1.21
BOM: 31040648
2.5cm, Font: Arial, 9
pt

Huawei Technologies Co., Ltd.
Administration Building, Huawei Technologies
Co., Ltd., Bantian, Longgang District,
Shenzhen, P. R. China
Postal Code: 518129
Website: http://www.huawei.com
BOM: 31040648

Airbridge cBTS3612 CDMA Base Station Installation Manual Airbridge cBTS3612 CDMA Base Station Installation Manual Airbridge cBTS3612 CDMA Base Station Installation Manual Airbridge cBTS3612 CDMA Base Station Installation Manual
15.7cm
Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd.
10cm

1. 16K Cover for hectograph; Font: Arial 22 pt; Product name: Bold
Airbridge cBTS3612 CDMA
Base Station
Installation Manual

HUAWEI
1. Hardware Installation
2. Software Installation & System
Commissioning
Airbridge cBTS3612 CDMA Base Station
Installation Manual
V100R002

Airbridge cBTS3612 CDMA Base Station
Installation Manual
Manual Version T2-030448-20030125-C-1.21
Product Version V100R002
BOM 31040648
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support
and service. Please feel free to contact our local office, customer care center or company
headquarters.
Huawei Technologies Co., Ltd.
Address: Administration Building, Huawei Technologies Co., Ltd.,
Bantian, Longgang District, Shenzhen, P. R. China
Postal Code: 518129
Website: http://www.huawei.com
Email: suppo[email protected]

©2003 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks
, HUAWEI, C&C08, EAST8000, HONET, , ViewPoint, INtess, ETS, DMC,
TELLIN, InfoLink, Netkey, Quidway, SYNLOCK, Radium, M900/M1800,
TELESIGHT, Quidview, Musa, Airbridge, Tellwin, Inmedia, VRP, DOPRA, iTELLIN,
HUAWEI OptiX, C&C08 iNET, NETENGINE, OptiX, SoftX, iSite, U-SYS, iMUSE,
OpenEye, Lansway, SmartAXare trademarks of Huawei Technologies Co., Ltd.
Notice
The information in this document is subject to change without notice. Every effort
has been made in the preparation of this document to ensure accuracy of the
contents, but all statements, information, and recommendations in this document
don't constitute the warranty of any kind, express or implied.

About This Manual
Version
The product version corresponds to the manual is Airbridge cBTS3612 CDMA Base
Station V100R002.
Contents
The manual introduces the insulation methods and procedure of cBTS3612. It is
divided into two modules:
lModule 1: Hardware Installation
This module describes in detail the installation procedure of the hardware system,
including preparations, equipment room, antenna & feeder, and the inspection after
installation.
lModule 2: Software Installation & System Commissioning
This part introduces the installation procedure of BTS maintenance terminal software
and the BTS system software, as well as the testing and commissioning of the system.
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.
Target Readers
The manual is intended for the following readers:
lInstallation engineers & technicians
lOperation & maintenance personnel
Conventions
This document uses the following conventions:

I. General conventions
Convention Description
Arial Normal paragraphs are in Arial.
Arial Narrow Warnings, cautions, notes and tips are in Arial Narrow.
Terminal Display Terminal Display is in Courier New; message input by the user
via the terminal is in boldface.
II. Command conventions
Convention Description
boldface font Command keywords (which must be input unchanged) are in boldface.
italic font Command arguments for which you supply values are in italics.
[]Elements in square brackets [ ] are optional.
{x|y|...} Alternative keywords are grouped in braces and separated by vertical bars. One is
selected.
[ x | y | ... ] Optional alternative keywords are grouped in square brackets and separated by
vertical bars. One (or none) is selected.
{ x | y | ... } * Alternative keywords are grouped in braces and separated by vertical bars. A
minimum of one and maximum of all can be selected.
[ x | y | ... ] * Optional alternative keywords are grouped in square brackets and separated by
vertical bars. Many (or none) are selected.
!A line starting with an exclamation mark is comments.
III. GUI conventions
Convention Description
< > Message entered via the terminal is within angle brackets.
[ ] MMIs, menu items, data table and field names are inside square brackets [ ].
/Multi-level menus are separated by forward slashes (/). Menu items are in
boldface. For example, [File/Create/Folder].
IV. Keyboard operation
Format Description
<Key> Press the key with key name expressed with a pointed bracket, e.g.
<Enter>, <Tab>, <Backspace>, or<A>.
<Key1+Key2> Pressthekeysconcurrently;e.g. <Ctrl+Alt+A>meansthethreekeys should
be pressed concurrently.

Format Description
<Key1,Key2> Press the keys in turn, e.g. <Alt, A>means the two keys should be pressed
in turn.
[Menu Option] The item with a square bracket indicates the menuoption, e.g. [System]
option on the main menu. The item with a pointed bracket indicates the
functional button option, e.g. <OK> button on some interface.
[Menu1/Menu2/Menu3] Multi-level menu options, e.g. [System/Option/Color setup] on the main
menu indicates [Color Setup] on the menu option of [Option], which is on
the menu option of [System].
V. Mouse operation
Action Description
Click Press the left button or right button quickly (left button by default).
Double Click Press the left button twice continuously and quickly.
Drag Press and hold the left button and drag it to a certain position.
VI. Symbols
Eye-catching symbols are also used in this document to highlight the points worthy of
special attention during the operation. They are defined as follows:
Caution,Warning, Danger: Means reader be extremely careful during the operation.
&Note Comment, Tip,Knowhow,Thought: Means a complementary description.

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Table of Contents
i
Table of Contents
Safety Precautions ............................................................................................................ S-1
1Overview ................................................................................................................... S-1
1.1Symbol Explanation......................................................................................... S-2
2Toxic Articles ............................................................................................................. S-3
2.1Beryllium Oxide ............................................................................................... S-3
2.2 Hydrochloride .................................................................................................. S-4
2.3 Hydrofluoride ................................................................................................... S-4
3Electrical Safety......................................................................................................... S-4
3.1High Voltage.................................................................................................... S-4
3.2Power Cables .................................................................................................. S-5
3.3 Tools................................................................................................................ S-5
3.4 Drilling............................................................................................................. S-6
3.5 Thunderstorms ................................................................................................ S-6
3.6Static Electricity............................................................................................... S-6
3.7Power Labels................................................................................................... S-8
3.8 Leakage Current .............................................................................................. S-8
3.9Flammable Air Environment............................................................................. S-9
4Batteries .................................................................................................................... S-9
4.1 General Operations ......................................................................................... S-9
4.2Short Circuit................................................................................................... S-10
4.3 Harmful Gases............................................................................................... S-10
4.4 High Temperature.......................................................................................... S-10
4.5Acid Liquid..................................................................................................... S-11
4.6Battery Replacement ..................................................................................... S-11
5Microwave and Magnetic Field ................................................................................ S-11
5.1 Introduction.................................................................................................... S-11
5.2Definition of the Environment ........................................................................ S-12
5.3 Operation Codes ........................................................................................... S-12
6Laser ....................................................................................................................... S-12
7High Temperature.................................................................................................... S-13
8Fans ........................................................................................................................ S-13
9Working at High Altitudes ........................................................................................ S-14
9.1 General Operations ....................................................................................... S-14
9.2Safety Codes for Using Ladders .................................................................... S-14
10 Other Items............................................................................................................ S-17
10.1 Hoisting of Heavy Objects ........................................................................... S-17
10.2Handling of Heavy Objects .......................................................................... S-18

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Table of Contents
ii
10.3Sharp Edges ................................................................................................ S-19
10.4Inserting & Drawing Out the Boards ............................................................ S-19
10.5Bundling the Signal Cables.......................................................................... S-20
10.6Maintenance and Commissioning by a Single Person is not Allowed.......... S-20

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Safety Precautions
S-1
Safety Precautions
1 Overview
This section covers part of the safety precautions to be observed during the
installation, maintenance, and the related operation of Huawei-developed
network equipment.
Caution:
Before any operation, please carefully go through the operation instructions and precautions so
as to prevent accidents. The signs such as "Caution, Attention, Warning and Danger" in
manuals are merely the supplements to safety precautions in operations rather than all the
safety precautions to be observed. Therefore, personnel engaged in the installation and
maintenance of Huawei-developed products should have basic knowledge of safe operation,
undergo relevant training and be qualified for related operations.
Please abide by local safety regulations during the operation. The safety
precautions in this manual only serve as supplements to local safety
regulations.
When operating Huawei-developed products and equipment, please strictly
abide by the precaution points and specific safety instructions concerning the
equipment provided by Huawei. The safety warnings listed in this manual only
show the precaution points that Huawei are aware of. Huawei Company does
not bear any consequence resulting from violation against universal regulations
for safety operation, or violation against the safety codes in designing,
production and equipment using.
The personnel responsible for the installation and maintenance of
Huawei-developed products should undergo strict training, command the correct
operation methods and get acquainted with various safety precautions before
performing any operation such as equipment installation, maintenance, etc.

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Safety Precautions
S-2
1.1 Symbol Explanation
The signs shown in Table 1 in this manual, are intended to remind readers of
the safety precautions to be observed during the operations of equipment
installation and maintenance.
Safety prompts are divided into the following levels: Danger, Warning, Attention
and Caution. The format is shown in the following: The text note of the safety
level is indicated to the right of the symbol. And the detailed explanations of the
safety precautions are shown below the symbol.
Danger:
Indicating that casualties or serious accident may occur if this safety instruction is ignored.
Warning:
Indicating that serious or major injuries may occur or equipment may be damaged if this safety
instruction is ignored.
Attention:
Indicating that major injuries may occur or equipment may be damaged if this safety instruction
is ignored.
Caution:
Indicating that injuries may occur or equipment may be damaged if this safety instruction is
ignored.
The types and meanings of safety signs are shown in the following table.

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Safety Precautions
S-3
Table 1 Types and meanings of safety signs
Safety symbol Meaning
Common warning symbol:Indicates general safety precautions.
Anti-static symbol: Indicates that the equipment is sensitive to static
electricity.
Live-line symbol: Indicates dangerous voltage.
Microwave symbol: Indicates powerful electromagnetic field.
Laser symbol: Indicates powerful laser beam.
Scald symbol: Indicates that the equipment surface with high
temperature, which might cause scald or burns on the personnel. Upon
this warning, people should not touch the surface, so as to avoid any
scald or burn.
2 Toxic Articles
2.1 Beryllium Oxide
Warning:
Some equipment components carrying toxic beryllium oxide are chosen unavoidably.
lOnly when the components carrying beryllium oxide are damaged may the
beryllium oxide do harm to human body. The personnel who contact or
handle the components should be aware of the component peculiarity and
take corresponding preventive measures beforehand.
lTo dispose of the component, the personnel should make necessary
chemical treatment or special waste processing for the component carrying
beryllium in accordance with related local regulations. The components
carrying beryllium should not be discarded freely.

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Safety Precautions
S-4
2.2 Hydrochloride
Warning:
Some components of the equipment carrying hydrochloride are used as it is unavoidable. Toxic
gases will be generated by these components when burned.
lToxic gases will be generated when burning these components. Preventive
measures should be taken beforehand so that the components will not get
burned, and even if the burning occurs, the toxic gases will not be inhaled
into human body. The components should not be discarded freely. To
dispose of the component, the personnel should make necessary chemical
treatment or special waste processing for the component carrying
hydrochloride in accordance with related local regulations.
2.3 Hydrofluoride
Warning:
Some equipment components carrying hydrofluoride are chosen unavoidably. Toxic gases will
be generated when burning these components.
lPreventive measures should be taken beforehand so that the components
will not get burned, and even if the burning occurs, the toxic gases will not
be inhaled into human body. The components should not be discarded
freely. To dispose of the component, the personnel should make necessary
chemical treatment or special waste processing for the component carrying
hydrofluoride in accordance with related local regulations.
3 Electrical Safety
3.1 High Voltage
Danger:
High voltage power supply provides electricity for equipment operation. Direct contact or indirect
contact via damp objects and conductors with high-voltage wires or mains supply may be fatal.

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Safety Precautions
S-5
lInstallation of AC power supply equipment must be implemented in
compliance with local safety regulations, and the personnel engaged in AC
power supply must be qualified for high-voltage and AC operations.
lElectrical conductors such as watches, bracelets and rings must be
removed before operation.
lIf the cabinet is found to be wet, please turn off power supply immediately.
lKeep the equipment dry upon operation under humid environment.
Warning:
Improper high-voltage operations may result in fire accidents and electric shocks. Therefore, AC
power cables must be laid in compliance with local codes and regulations. High-voltage
operators should be trained and qualified.
3.2 Power Cables
Caution:
Live installation and removal of power cables are prohibited. Electric sparks or arcs may be
generated when power cables get in touch with conductors, which may cause fire accidents or
eye injuries.
lPower must be switched off before installation and removal of the power
cable.
lBefore connecting a cable, make sure that the cable and cable label to be
used should match actual installation requirements.
3.3 Tools
Warning:
High-voltage and AC operations require special tools instead of general-purpose or makeshift
tools.

Installation Manual
Airbridge cBTS3612 CDMA Base Station Precautions Safety Precautions
S-6
3.4 Drilling
Warning:
Unauthorized drilling on the cabinet is strictly prohibited. Improper drilling may damage the
connections and cables inside the cabinet and the metal filings produced during the drilling may
cause short-circuits of the circuit boards if they fall into the cabinet.
lWear protective insulation gloves and remove the cables inside the cabinet
before drilling holes on the cabinet.
lTake care of your eyes when drilling holes. As the splashing metal burrs
&scraps may hurt your eyes.
lPrevent metal scraps from entering the cabinet inside.
lImproper drilling will damage the electromagnetic shielding performance of
the cabinet.
lClean up the metal scraps after drilling.
3.5 Thunderstorms
Danger:
High-voltage and AC operations and operations on the steel towers and masts are strictly
prohibited in a stormy weather.
lThunderstorms can generate powerful electromagnetic field in the
atmosphere. Therefore, equipment should be grounded properly in order to
prevent the equipment from being thunderstruck.
3.6 Static Electricity
Caution:
Static electricity generated by the human body may damage the electrostatic-sensitive parts on
the circuit boards, such as large-scale integrated circuit (IC).
lThe grating generated between human activities and the components is the
rootage for electrostatic charge accumulation. In dry climate, the