Huawei B932 series User manual

Huawei B932 modem
Step by Step Guide

2
Go-To-Market Process
How do I insert the SIM card ?

3
Go-To-Market Process
What does the LED lights on my modem means ?

4
Go-To-Market Process
Where should I go to change my settings ?
1. Type 192.168.1.1 in your internet browser address bar. Click Go to be directed to this page
2. Enter the following :-
User ID : Admin
Password : admin

5
Go-To-Market Process
Do I have to configure my modem ?
No. Your modem is pre-configured with the default settings. We DO NOT recommend that you
change the settings. If any change of configuration is required, please refer to the modem's
user manual.

6
Go-To-Market Process
How do I set my profile ?
You can setup your profile by using the Quick Setup in the settings page
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click Quick Setup on the left hand bar. Click Next
3. Key in the following information and click Next:
Profile Name : Maxis 3G (default ) Dialup Number : *99#
PPP User Name : maxis PPP Password : wap
APN : Static : maxisbb IP Address : Dynamic
4. Choose the following :-
PPP Connection : On Demand PPP Authentication : CHAP
5. Click Finish
6. Click Continue
7. Click on Connection Status to check on the connection status.
Profile Settings : Maxis 3G
PPP Connection : On Demand
PPP Status : Connected

7
Go-To-Market Process
23
How do I set my profile ?
45

8
Go-To-Market Process
How do I set my profile ?
6 7

9
Go-To-Market Process
How can I check my connection status ?
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click on Connection
3. Your connection will be displayed

10
Go-To-Market Process
How do I change my modem’s password ?
1. Go to your modem’s settings page and login ( refer to Question 3)
2. Click Advanced Settings
3. Click System
4. Click Modify Password
5. Enter Current Password : admin
6. Enter New Password and Confirm Password
7. Click on Modify