Huawei E366 User manual

1
Thank you for choosing the Mobile Broadband USB Stick.
With your USB Stick, you can access a wireless network at
high speed.
Note:
This manual describes the appearance of the USB St ick, as well as the procedures for
preparation, installat ion, and removal. For operation details about the management
program, see the online help included in the management program.
etting to Know Your USB Stick
The following figure shows the appearance of the USB Stick. It is provided onl for our
reference. The actual product ma be different.

2
11
2
1
3
1
4
1
5
 Rotatable USB Connector
It connects the USB St ick to a PC.

3
 Indicator
It indicates the status of the USB Stick.
 Green, blinking twice ever 3s: The USB St ick is powered on.
 Green, blinking once ever 3s: The USB St ick is registering with a 2G network.
 Blue, blinking once ever 3s: The USB Stick is registering with a 3G/3G+ network.
 Green, solid: The USB Stick is connected to a 2G network.
 Blue, solid: The USB Stick is connected to a 3G network.

4
 C an, solid: The USB Stick is connected to a 3G+ network.
 Off: The USB Stick is removed.
 RF Output Power Port
It connects an RF cable to the USB Stick for RF tests.
 MicroSD Card Slot
It holds a microSD card.
 SIM/USIM Card Slot
It holds a Subscriber Ident it Module (SIM) /Universal Subscriber Identit Module (USIM)
card.
etting Your USB Stick Ready
1. Slide the back cover to remove it from the USB St ick.
2. Insert the SIM/USIM card and the microSD card into the corresponding card slots, as
shown in the following figure.
3. Replace the back cover and slide it into place.

5
Note:
 The microSD card is an optional accessor .
 Ensure that the beveled edge of the SIM/USIM card is properl aligned with that of the
SIM/USIM card slot and the microSD card is inserted according to the direction as
labeled on the microSD card slot.
 Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, the
card as well as our USB St ick ma get damaged and the data stored on the card ma
be corrupted.

6
Installation/Removal uide
The procedure for installing the management program depends on the operating s stem
(OS) installed on our PC. The following sections take Windows XP as an example.
Connecting the USB Stick to a PC
Plug the USB Stick into the USB port of your PC.

7
Installing the USB Stick Management Program
1. Connect the USB Stick with the PC.
2. The OS automaticall detects and recognizes the new hardware and starts the
installation wizard.
Note:
If the auto-run program does not respond, find the AutoRun.exe file in the driver path.
The user must double-click AutoRun.exe to run the program.
3. Follow the on-screen instructions of the installation wizard.
4. After the program is installed, a shortcut icon for the management program appears
on the desktop.
Starting the Management Program
After being installed, the management program starts automaticall . Then ever time
the USB Stick is connected to the PC, the management program starts automat icall .

8
You can also double-click the shortcut icon on the desktop to start the management
program.
Removing the USB Stick
1. Double-click in the notification area. Then the Unplug or Eject Hardware
dialog box appears.
2. Select the corresponding hardware and then click Stop.
3. When the message "It is safe to remove the device" appears, remove the USB St ick.
Uninstalling the Management Program
1. Choose Start > Control Panel > Add or Remove Programs.
2. Find the management program and click Remove to uninstall the management
program.
Note:
Exit the management program before uninstalling it.

9
Version: V100R001_01 Part Number: 3101****