Huawei EchoLife BM325 User manual

EchoLife BM325 WiMAX USB Modem
Quick Start

Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base Bantian, Longgang
Shenzhen 518129, People's Republic of China
Website: http://www.huawei.com
E-mail: [email protected]
Copyright © Huawei Technologies Co., Ltd. 2009. All rights
reserved.
No part of this document may be reproduced or transmitted in any form or by
any means without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of
Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any
manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract,
reverse engineer, lease, assign, or sublicense the said software, unless such
restrictions are prohibited by applicable laws or such actions are approved by
respective copyright holders under licenses.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Hua-
wei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the
property of their respective owners.

Notice
Some features of the product and its accessories described herein rely on the
software installed, capacities and settings of local network, and may not be
activated or may be limited by local network operators or network service pro-
viders, thus the descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any infor-
mation or specications contained in this manual without prior notice or obliga-
tion.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS RE-
QUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EX-
PRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL
HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regula-
tions and will obtain all necessary governmental permits and licenses in order to
export, re-export or import the product mentioned in this manual including the
software and technical data therein.

Contents
01 Before you begin........................................... 1
02 Getting to Know Your USB Modem ................... 1
03 Requirements on PC Conguration................... 2
04 Connecting the External Antenna (Optional)...... 3
05 Installation Guide.......................................... 3
06 Setting Up a PPP Dial-Up Connection................ 5
07 Connecting and Disconnecting a Network.......... 6
08 Troubleshooting ............................................ 8
09 Specications ..............................................10
10 Warnings and Precautions..............................11

––
01 Before you begin
Check the following items in the product package. If you nd anything missing
or damaged, contact the service provider.
USB Modem
USB Cable
Quick Start
Qualication Card
02 Getting to Know Your USB Modem
The supported functions and actual appearance are subject to your product
purchased. The following pictures are displayed for illustration purpose only.
,QGLFDWRU ([WHUQDO
DQWHQQD
LQWHUIDFH
86%SRUW
•
•
•
•

––
Indicator Status Description
On The USB Modem is powered on.
Blinks once per
second
The USB Modem accesses the network normally. No
data, however, is being transmitted.
Blinks
The USB Modem is transmitting data. The larger the
amount of transmitted data is, the higher the blinking
speed is.
Off The USB Modem is powered off.
03 Requirements on PC Conguration
Your PC must meet the following conguration requirements for using the USB
Modem. Otherwise, the operation performance of the USB Modem may be de-
graded.
Item Conguration
Memory 128 MB random access memory (RAM) or above
Free hard disk
space 50 MB or above
Operating system
(OS)
Windows XP (With Service Pack 2 or a patch of later
version)
Windows Vista
•
•
USB interface Standard USB 2.0
Display resolution 800×600 pixel or above. 1024×768 pixel is recommend-
ed.

––
04 Connecting the External Antenna (Optional)
Do not use the external antenna outdoors.
During lightning storms, stop using the external antenna and disconnect
it from the USB Modem.
•
•
䇈ᯢ
To connect the external antenna to your USB Modem, do as follows:
Power off the USB Modem.
Pull out the plastic plug on the side of the USB Modem and connect the
external antenna to the USB Modem.
It is recommended that you connect the external antenna to the interface
not close to the USB port.
Put the external antenna in an open space without any surrounding obsta-
cles, to ensure good reception of network signals.
05 Installation Guide
The procedure for installing the management program depends on the operat-
ing system installed on your PC. The following section takes Windows XP as an
example.
Connecting the USB Modem to the PC
CAUTION
Ensure that the PC is powered on when connecting the USB Modem to
The PC. Otherwise, the USB Modem may not work properly.
Power on the PC.
Connect the USB Modem to the PC by using the USB cable, as shown in the
following gure.
a.
b.
c.
a.
b.

––
Use the delivery-attached cable. A USB extension cable or an extra-long
USB cable may cause shortage of power supply, thus making the device
unserviceable.
During lightning storms, stop using the USB modem and disconnect it
from the computer.
•
•
䇈ᯢ
Installing the Management Program
Power on the PC.
Connect the USB Modem to the PC by using the USB cable.
The OS displays a message that new hardware is found and prompts you to
install the management program.
Install the management program according to the on-screen instructions.
When you nish installing the management program, the shortcut icon of
the management program appears in the notication area.
Uninstalling the Management Program
You can uninstall the management program by two methods.
Method one:
Exit the management program.
Choose Start > All programs.
Find the management program.
a.
b.
c.
d.
e.
a.
b.
c.

––
Choose Uninstall.
Uninstall the management program according to the on-screen instructions.
Method two:
Exit the management program.
Choose Start > Control Panel > Add/Remove Programs.
Click Change/Remove Programs.
Find the management program.
Click Change/Remove.
Uninstall the management program according to the on-screen instructions.
After the management program is uninstalled, restart the PC to ensure com-
plete removal of the management program from the PC.
䇈ᯢ
Disconnecting the USB Modem
If is not displayed in the notication area, do as follows:
Exit the management program.
Disconnect the USB Modem or the USB cable from the PC.
If is displayed in the notication area, do as follows:
Double-click in the notication area. The OS displays the message that
"Safely remove hardware."
Stop running the corresponding hardware of the USB Modem on the Device
Manager.
Disconnect the USB Modem or the USB cable from the PC after the OS dis-
plays the message that you can remove the hardware safely.
06 Setting Up a PPP Dial-Up Connection
d.
e.
a.
b.
c.
d.
e.
f.
•
a.
b.
•
a.
b.
c.

––
If the USB Modem accesses the Internet through a Point-to-Point Protocol (PPP)
dial-up connection, you need to set up a PPP dial-up connection after installing
the management program.
To set up a PPP dial-up connection on the Windows OS, do as follows:
Choose Start > Control Panel > Network Connection.
Under Network Tasks in the left pane, click Create a new connection.
Click Next in the displayed New Connection Wizard dialog box.
Select Connect to the Internet and then click Next.
Select Set up my connection manually and then click Next.
Select Connect using a broadband connection that requires a user
name and password and then click Next.
Enter the name of the Internet service provider (ISP) as the name of the
new connection.
Select Anyone's use or My use only and then click Next.
Enter the user name and password provided by the ISP and conrm the
password. Then click Next.
Click Finish.
After setting up a PPP dial-up connection, you can run the management pro-
gram and then access the Internet manually.
䇈ᯢ
07 Connecting and Disconnecting a Network
Connecting a Network
To connect the USB Modem to a WiMAX network manually, do as follows:
Start the management program and then click Setting.
Enter the username and password provided by the ISP, and save the user
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
a.
b.

––
account.
Click Connection.
Click Connect Network.
Then the USB Modem tries to connect to the network. When the connection
is established, the icons indicating a successful network connection and the
signal strength are displayed at the bottom of the management program
window.
Disconnecting a Network
When you do not use the Internet, you can disconnect the USB Modem from the
network manually.
After you disconnect the network connection, you need to connect the USB
Modem to the network again before accessing the Internet.
Start the management program and then click Connection.
Click Disconnect Network.
c.
d.
a.
b.

––
08 Troubleshooting
When the USB Modem is connect-
ed to the PC for the rst time, the
system does not prompt you to
install the Management Program.
After the system recognizes the new
hardware, you need to wait a few
minutes for the system to prepare
for the installation of the program.
Ensure that the USB Modem is con-
nected to the PC correctly and
is displayed in the notication area.
Otherwise, disconnect the USB Mo-
dem and then connect it to the PC
again.
Check whether the disk icon is dis-
played in the My Computer win-
dow.
If yes, double-click the icon.
If not, remove the USB Modem
from the PC and restart the PC.
Then connect the USB Modem to
the PC again.
Log in to the Web site specied by
the ISP to download the installa-
tion program, and then install the
program.
Ensure that the auto play function of
the OS is enabled.
•
•
•
i.
ii.
•
•
The Management Program can-
not start automatically after the
installation.
Check whether the shortcut icon
of the management program is
displayed on the desktop or in the
notication area. If yes, double-
click the icon to start the manage-
ment program.
Ensure that the USB Modem is
correctly connected to the PC as
follows:
Uninstall the management pro-
gram.
Disconnect the USB Modem from
the PC, and then connect the
USB Modem to the PC again.
Install the management pro-
gram according to the on-screen
instructions.
Remove the USB Modem safely and
restart the PC. Then connect the
USB Modem to the PC again.
Ensure that the auto play function
of the OS is enabled.
•
•
i.
ii.
iii.
•
•

––
The USB Modem cannot access
the Internet.
Ensure that you are in the service
area.
Ensure that the USB Modem is con-
nected to the PC correctly and the
management program is installed
correctly.
Ensure that you have subscribed
to the Internet access service.
Contact your local ISP for how to
subscribe to the service.
When you power on the PC after
the USB Modem is connected,
the Windows OS hangs.
Check the settings of devices
such as the USB port and network
adapter in the Basic Input/Out-
put System (BIOS) of the PC. It
is recommended that you enable
devices such as the USB port and
the network adapter.
Remove the USB Modem safely and
restart the PC. Then connect the
USB Modem to the PC again.
•
•
•
•
•
The device cannot be identied
or a dead halt suddenly occurs
when the Management Program
is running.
Use the cable delivered with the USB
Modem. The use of a USB extension
cable or an extra-long USB cable may
cause shortage of power supply, thus
making the device unusable.
The system informs you that the
software is damaged.
The USB Modem can repair the
software automatically. When the
software is damaged, the system
prompts you to repair the software.
You can repair the software accord-
ing to the on-screen instructions.
Contact your local ISP if the auto-
matic repair of the software fails.
•
•

–0–
09 Specications
Physical Interface
USB interface USB 2.0
WiMAX parameters
Standard IEEE 802.16e-2005
Frequency 2.496–2.69 GHz
Multiple access method Orthogonal Frequency-Division Multiple Access
(OFDMA)
Duplex mode Time-Division Duplex (TDD)
Modulation scheme QPSK, 16QAM, 64QAM (for downlink only)
Data Rate Up to 15 Mbit/s for downlink and 5 Mbit/s for uplink
Other parameters
Power consumption < 2 W
Operating temperature 0˚C to 40˚C (32˚F to 104˚F )
Operating humidity 5% to 95% (non-condensing)
Dimensions (L×W×H) 89 mm × 43 mm × 15 mm
Weight < 38.5 g

––
10 Warnings and Precautions
To use the device properly and safely, read these warnings and precautions carefully and
strictly observe them during operation.
Basic Requirements
During storage, transportation, and operation of the device, keep it dry and prevent it
from colliding with other objects.
Do not dismantle the device. In case of any fault, contact an authorized service center for
assistance or repair.
Without authorization, no organization or individual can change the mechanical, safety, or
performance design of the device.
When using the device, observe all applicable laws and regulations and respect the legal
rights of other people.
�
�
�
�
Environmental Requirements for Using the Device
Before connecting and disconnecting cables, stop using the device, and then disconnect it
from the power supply. Ensure that your hands are dry during operation.
Keep the device far from sources of heat and re, such as a heater or a candle.
Keep the device far from electronic appliances that generate strong magnetic or electric
elds, such as a microwave oven or a refrigerator.
Place the device on a stable surface.
Place the device in a cool and well-ventilated indoor area. Do not expose the device to
direct sunlight. Use the device in an area with a temperature ranging from 0°C to 40°C.
During thunderstorms, power off the device, and then remove all the cables connected to
it to prevent it from getting damaged due to lightning strikes.
�
�
�
�
�
�
Precautions for Using Wireless Devices
Do not use the device where using wireless devices is prohibited or may cause interfer-
ence or danger.
The radio waves generated by the device may interfere with the operation of electronic
medical devices. If you are using any electrical medical device, contact its manufacturer
for the restrictions on the use of the device.
Do not take the device into operating rooms, intensive care units (ICUs), or coronary
care units (CCUs).
�
�
�
Areas with Inammables and Explosives
Do not use the device where inammables or explosives are stored, for example, in a gas
station, oil depot, or chemical plant. Otherwise, explosions or res may occur. In addi-
tion, follow the instructions indicated in text or symbols.
Do not store or transport the device in the same box as inammable liquids, gases, or
explosives.
�
�

––
Accessory Requirements
Use only the accessories supplied or authorized by the device manufacturer. Otherwise,
the performance of the device may get affected, the warranty for the device or the laws
and regulations related to telecommunications terminals may become null and void, or an
injury may occur.
Safety of Children
Keep the device and its accessories out of the reach of children. Otherwise, they may
damage the device and its accessories by mistake, or they may swallow the small com-
ponents of the device, causing suffocation or other dangerous situations.
Maintenance
If the device is not used for a long time, power it off, and then remove all the cables con-
nected to it.
If any exception occurs, for example, if the device emits any smoke or unusual sound or
smell, stop using the device immediately, power it off, remove all the cables connected to
it, and then contact an authorized service center.
Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunction of the device.
Before cleaning the device, stop using it, power it off, and then remove all the cables
connected to it.
Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent
or spray to clean the device shell.
�
�
�
�
�
Trafc Security
Observe local laws and regulations while using the device. To prevent accidents, do not
use your wireless device while driving.
RF signals may affect electronic systems of motor vehicles. For more information, consult
the vehicle manufacturer.
In a motor vehicle, do not place the device over the air bag or in the air bag deployment
area. Otherwise, the device may hurt you owing to the strong force when the air bag
inates.
�
�
�
Disposal and Recycling Information
This symbol on the device (and any included batteries) indicates that the device (and
any included batteries) should not be disposed of as normal household garbage. Do
not dispose of your device or batteries as unsorted municipal waste. The device (and
any batteries) should be handed over to a certied collection point for recycling or
proper disposal at the end of its life.
For more detailed information about the recycling of the device or batteries, contact your
local city ofce, the household waste disposal service, or the retail store where you pur-
chased this device.
The disposal of this device is subject to the Waste from Electrical and Electronic Equip-
ment (WEEE) Directive of the European Union. The purpose for separating WEEE and bat-
teries from other waste is to minimize any environmental impact and health hazard due
to the presence of hazardous substances.
�
�

––
Reduction of Hazardous Substances
This device is compliant with the EU Registration, Evaluation, Authorisation and Restric-
tion of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European
Parliament and of the Council) and the EU Restriction of Hazardous Substances (RoHS)
Directive (Directive 2002/95/EC of the European Parliament and of the Council). For more
information about the REACH compliance of the device, visit the Web site www.huawei-
device.com/certication. You are recommended to visit the Web site regularly for up-to-
date information.
EU Regulatory Conformance
Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред
съответства на основните изисквания и другите разпоредби на Директива 1999/5/EC.
Česky: Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve shodě se
základními požadavky a dalšími souvisejícími opatřeními směrnice 1999/5/EC.
Dansk: Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i overensstem-
melse med de obligatoriske krav og andre relevante bestemmelser i direktiv 1999/5/EF.
Nederlands: Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in over-
eenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn
1999/5/EC.
English: Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Eesti: Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab Direktiivi
1999/5/EÜ põhinõudmistele ja teistele asjakohastele määrustele.
Suomi: Huawei Technologies Co., Ltd. vakuuttaa täten, että tämä laite on yhdenmukainen
direktiivin 1999/5/EY olennaisten vaatimusten ja direktiivin muiden asiaankuuluvien lau-
sumien kanssa.
Français (Européen) : Le fabricant déclare que ce produit est conforme aux exigences es-
sentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Deutsch: Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses Produkt die erford-
erlichen Bestimmungen und andere relevante Verordnungen der Richtlinie 1999/5/EG
einhält.
Ελληνικά: Δια της παρούσης η Huawei Technologies Co., Ltd. δηλώνει ότι αυτή η συσκευή
συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της οδηγίας
1999/5/Ε.Κ.
Magyar: Jelen nyilatkozaton keresztül a Huawei Technologies Co., Ltd. kijelenti, hogy a
készülék megfelel az EC/5/1999 Irányelv összes lényeges követelményének és vonatkozó
előírásának.
Gaeilge: Fograíonn Huawei Technologies Co., Ltd leis seo go bhfuil an fheiste seo i gcom-
hlíonadh leis na fíor-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE.
Italiano: Col presente documento, Huawei Technologies Co., Ltd. dichiara che questo dis-
positivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva
1999/5/CE.
Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas
1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem.
�
�
�
�
�
�
�
�
�
�
�
�
�
�

––
Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka Direkty-
vos 1999/5/EC pagrindinius reikalavimus ir taikomas sąlygas.
Malti: Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tagħmir hu konformi
mal-ħtiġijiet essenzjali u provvedimenti rilevanti oħrajn ta’ Direttiva 1999/5/KE.
Polski: Wymieniona w tym dokumencie rma Huawei Technologies Co., Ltd. deklaruje,
że niniejsze urządzenie spełnia zasadnicze wymagania w zakresie zgodności oraz inne
odnośne postanowienia Dyrektywy 1999/5/EC.
Português (Europeu) : Deste modo, a Huawei Technologies Co., Ltd. declara que este dis-
positivo está em conformidade com os requisitos essenciais e outras provisões relevantes
da Directiva 1999/5/CE.
Română: Prin prezenta Huawei Technologies Co., Ltd. declară că acest dispozitiv este
conform cu cerinţele esenţiale şi alte prevederi relevante ale directivei 1999/5/CE.
Slovenčina: Huawei Technologies Co., Ltd. týmto vyhlasuje, že zariadenie je v súlade so
základnými požiadavkami a inými relevantnými predpismi Smernice 1999/5/ES.
Slovenščina: Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v skladu z bistveni-
mi zahtevami in drugimi ustreznimi določbami Direktive 1999/5/ES.
Español (Europeo) : Con el presente documento, Huawei Technologies Co., Ltd. declara
que este dispositivo cumple con los requisitos esenciales y con las demás disposiciones
correspondientes de la Directiva 1999/5/CE.
Svenska: Huawei Technologies Co., Ltd. förklarar härmed att denna produkt överens-
stämmer med de grundläggande kraven och andra relevanta föreskrifter i direktiv
1999/5/EG.
For the declaration of conformity, visit the Web site www.huaweidevice.com/certication.
Notice: Observe the national local regulations in the location where the device is to be
used. This device may be restricted for use in some or all countries of European Union.
�
�
�
�
�
�
�
�
�
�
�
Certication Information (SAR)
Your wireless device is a radio transmitter and receiver. It is designed not to exceed the
limits for exposure to radio waves recommended by international guidelines. These guide-
lines are developed by the independent scientic organization International Commission
on Non-Ionizing Radiation Protection (ICNIRP) and include safety margins designed to
assure the protection of all persons, regardless of age and health.
The antenna(s) used for this transmitter must be installed to provide a separation dis-
tance of at least 20cm from all persons.
�
�