Huawei LTE CPE B593 User manual

Let’s
connect
you.
The Telkom Easy Guide to set up your
Huawei LTE Router.

First, unpack
your new router.
1
The quick start guide
The safety information
2 external antennae
Your Huawei LTE Router
1 12vDC power supply cord
1 LAN cable
The box it comes in
2
3
4
5 6 7
1
2
3
4
5
6
7

Let’s get
started.
Screw the 2 external antennae into
the back of your router.
Connect the power supply into the
router and into a power socket.
Plug the yellow LAN cable into a port and the
other end into the LAN port on your computer.
3
2
1

Don’t
forget the
SIM card.
Insert your SIM into
the SIM socket
4

Ready
to go.
When the power light is blue you are
ready to install the software.
The mode LED light is either green
for 3G or blue for 4G.
The Wi-Fi light will be blue if Wi-Fi is enabled it
and can flash as data is transferred.
3
2
1

Setting up
the Router.
Open your internet browser
and go to http//192.168.1.1.
Type in admin for both the
username and password.
Change the admin password
of your router to your preferred
password and click Submit.
Choose Quick Setup from the left
navigation menu.
1 2 3

Almost
there...
Start with the Internet tab
and change the network mode
to LTE/4G in the dropdown and
click Next.
In the Wi-Fi tab change the
Wi-Fi SSID to your preferred
Wi-Fi name.
In the last tab, Wi-Fi Security,
change the Wi-Fi key (WPA-PSK)
to your preferred password and
click Next to complete your LTE
Router Setup.
4 5 6

Last few
steps.
Review your information
and click OK to submit. It is important
to log out properly by clicking Logout,
and not just shutting down your
browser window.
You’re connected. Start by viewing
your account details and logging
into My Telkom Services.
7 8

Done.
You’re connected.
If you still need help
call us on 10210.