Huawei WiFi AX3 User manual

HUAWEI WiFi AX3
Quick Start Guide
Quick Start Guide
Guide de démarrage rapide
Schnellstartanleitung
Guida rapida
Snelstartgids
Guia de Início Rápido
Guía de inicio rápido
Instrukcja obsługi
Snabbstartsguide
Hurtigstartveiledning
Hurtigstartguide
Pika-aloitusopas
Короткий посібник користувача
Ghid de pornire rapidă
Stručná úvodní příručka
WiFi Yönlendirici Hızlı Kullanım Kılavuzu
Kratko uputstvo
Īsa pamācība
Sparčiosios paleisties vadovas
Kiirtutvustus
Краткое руководство пользователя
Упатство за брз почеток
Ръководство за бърз старт
Stručná úvodná príručka
Gyors útmutató
Vodič za brzi početak rada
Vodnik za hiter začetek
Οδηγός γρήγορης έναρξης

Contents
Quick Start Guide .......................................................... 1
Quick Start Guide ................................................... 13
Guide de démarrage rapide ................................... 25
Schnellstartanleitung ............................................ 38
Guida rapida ....................................................... 51
Snelstartgids ....................................................... 64
Guia de início rápido ............................................. 77
Guía de inicio rápido ............................................. 90
Instrukcja obsługi ................................................. 103
Snabbstartsguide ....................................................... 117
Hurtigstartveiledning .................................................. 129
Hurtigstartguide .......................................................... 141
Pika-aloitusopas ......................................................... 153
Короткий посібник користувача ............................... 165
Ghid de pornire rapidă ............................................... 178
Stručná úvodní příručka ............................................ 190
WiFi Yönlendirici Hızlı Kullanım Kılavuzu ................... 202

Kratko uputstvo .......................................................... 219
Īsa pamācība ............................................................. 231
Sparčiosios paleisties vadovas .................................. 243
Kiirtutvustus ............................................................... 255
Краткое руководство пользователя ........................ 267
Упатство за брз почеток .......................................... 284
Ръководство за бърз старт ...................................... 297
Stručná úvodná príručka ............................................ 310
Gyors útmutató .......................................................... 322
Vodič za brzi početak rada ......................................... 336
Vodnik za hiter začetek .............................................. 348
Οδηγός γρήγορης έναρξης ........................................ 360

1
RESET button
WAN/LAN auto-adaptation port: Connects to the Internet (such as optical modem,
broadband modems, etc.) and wired network device such as a computer.
Power portH button Indicator
2 3
4
5
1
Quick Start Guide
1
32 4 5

2
POWER
LAN
PON
RESET
Step 1: Connecting the cables
• Erect the all antennas upright to ensure optimized Wi-Fi®signal.
•If the indicator stays red, this indicates that the router is not connected to the Internet.
Please refer to "Step 2: Conguring the network settings".
•For routers that support WAN/LAN auto-adaptation, the network ports are WAN/
LAN combo ports. You can also specify a xed WAN port on the router's web-based
management page.
WAN
LAN Internet
Optical/Broadband/cable modem
(from your broadband provider)

3
1Connect your mobile phone or computer
to the router's Wi-Fi network (no password
required).
Check for the Wi-Fi name on the bottom of
the new router.
Wi-Fi
Wi-Fi
Connected
2Open the browser, you will be
automatically redirected.
(If the page is not displayed
automatically, enter 192.168.3.1) .
GET STARTED
Step 2: Conguring the network settings
XXXXXX Wi-Fi Name: XXXXXX
Touch GET STARTED and chose
Create a Wi-Fi network.

4
3Enter your broadband account and password.
If your Internet connection does not require an account and password, please skip to the
next step.
Internet access wizard
Broadband account
Broadband password
VLAN
•If you have forgotten your broadband account
and password, contact your broadband carrier
to obtain a broadband account and password.
• If you need to congure VLAN on your
network, contact your broadband carrier to
conrm the VLAN parameters, and enable the
VLAN switch on the screen.
Next

5
4Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.
Internet access wizard
Prioritize 5 GHz
Wi-Fi network name
Wi-Fi network password
Login password
Internet access wizard
Conguration complete.
Enable Prioritize 5 GHz: Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal
strength is equal to increase connection speeds.
Conrm password
Next

6
Indicator
Steady green
Steady red
Flashing
Connected to the network
Not connected to the network
•Loose cable or connect error. Check the cable.
•Broadband network error. Contact your broadband carrier.
The router has detected a pairable device.
When other HUAWEI devices (support HarmonyOS Connect) , the indicator
on the HUAWEI WiFi AX3 will ash. When this happens, press the HUAWEI
WiFi AX3's H button. The indicator should flash quickly, indicating that the
pairable device is connecting to the HUAWEI WiFi AX3. The connection
process is complete when the indicator stops ashing.
Manage the router with our mobile app
Scan the QR code to download and install the HUAWEI AI Life App on
your mobile phone or tablet. You can use the app to manage your router.
•If you touched the H button by accident, wait for 2 minutes till the
indicator returns to normal.
•The H button also features WPS functionality.

7
Frequently Asked Questions (FAQ)
Q1: What can I do if I encounter any of the following issues when conguring the router?
• If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a
moment (till the router is started) and try to search again on your device.
• If you cannot visit the router's conguration page on your device: Ensure that your device is
connected to the router's Wi-Fi network, and then enter 192.168.3.1 in the browser to visit this page
on your device.
• If the page displays "Cable disconnected": Ensure that the router's WAN port is connected to
the modem's LAN port, and the modem has Internet access. Check that all joints are securely
connected and in good contact, and the network cables are in good condition.
If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the cables
and congure the router.
Q2: How do I restore the router to its factory settings?
Connect the router to the power supply and wait until the router completes the startup process.
Use a needle or pin to press the RESET button on the router for more than two seconds until the
indicator light goes out. Wait for the router to complete the restart process. When the indicator turns
red, this indicates that the router has been restored to its factory settings.
If the router has been factory reset, you need to congure it again.

8
Q5: What should I do if I forget my login password for the app or the router's web-based
management page?
Try using the router's Wi-Fi password to login. If the issue persists, restore the router to the factory
settings.
Q3: How do I connect an add-on HUAWEI router to my HUAWEI WiFi AX3's network?
You can connect the router in either of the following ways:
•Wired connection. Connect the WAN port of the add-on router (new or restored to factory settings)
to the LAN port of the congured HUAWEI WiFi AX3 using an Ethernet cable.
•Wireless connection. Step 1: Place the add-on router (new or restored to factory settings) within
one meter of the congured HUAWEI WiFi AX3 and connect it to the power supply. Step 2: When
the indicator on the HUAWEI WiFi AX3 starts to ash, press the H button on it. Wait until the
indicator on the add-on router shows it is connected to the network.
"HUAWEI router" refers to routers that support HarmonyOS Mesh+. Please check if your device
supports such feature.
Q4: How do I connect a Wi-Fi device to my router using WPS?
When your router is powered on, press its H button, and then press the WPS button on the Wi-Fi
device (such as a phone) within two minutes, to initiate standard WPS negotiation and connect the
Wi-Fi device to the router's Wi-Fi network.

9
You can connect your router in either of the following ways:
• Wired connection
Place your router in a room with weak or no signal strength, then connect the WAN port of your router
to the LAN port of the HUAWEI CPE using an Ethernet cable.
• Wireless connection (using the H button)
Step 1: Place the router within one meter of the HUAWEI CPE and connect the power supply.
Step 2: When the indicator on the HUAWEI CPE starts to ash, press the H button on it. Wait until the
indicator on the router shows that the router is connected to the network.
Step 3: Place the router in a room with weak signal strength and connect the power supply.
Q6: How do I connect my router to the HUAWEI CPE to expand the Wi-Fi network?
• The gure is for reference only.
• Ensure that the HUAWEI CPE is connected to the Internet, and the router is new or restored to factory
settings.
• Ensure that the HUAWEI CPE supports the HUAWEI HiLink function and CoAP protocol. Please consult
the distributor for details.
• Ensure that the distance between your router and the HUAWEI CPE is less than 10 meters and there are
no more than two walls in between.
within one meter

10
Safety information
Operation and safety
• Do not use your device if using the device is prohibited. Do not use the device if doing so causes
danger or interference with other electronic devices.
• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a
device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker,
hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
• Avoid dusty, damp, or dirty environments. Avoid magnetic elds. Using the device in these environments
may result in circuit malfunctions.
• Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -40 °C to +70 °C.
Extreme heat or cold may damage your device or accessories.
• Keep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not
enclose or cover your device with towels or other objects. Do not place the device in a container with
poor heat dissipation, such as a box or bag.
• The device should be installed and operated with a minimum distance of 20 cm between the radiator
and your body.
• Using an unapproved or incompatible power adapter, charger, or battery may damage your device,
shorten its lifespan, or cause a re, explosion, or other hazards.
• For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily
accessible.
• Unplug the power adapter from electrical outlets and the device when not in use.
• Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits,
malfunctions, or electric shocks.

11
Disposal and recycling information
The symbol on the product, battery, literature, or packaging means that the products and batteries
should be taken to separate waste collection points designated by local authorities at the end of
the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves
valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste disposal
service or visit the website https://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction of the use
of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation,
RoHS and Batteries (where included) directive. For declarations of conformity about REACH and RoHS,
please visit the website https://consumer.huawei.com/certication.
EU regulatory conformance
Hereby, Huawei Device Co., Ltd. declares that this device WS7100 V2 is in compliance with the following
Directive: RED 2014/53/EU, RoHS 2011/65/EU, ErP 2009/125/EC.
The full text of the EU declaration of conformity, the detailed ErP information and most recent information
about accessories & software are available at the following internet address:
https://consumer.huawei.com/certication.
Restrictions in the 5 GHz band:
The 5150 to 5350 MHz frequency range is restricted to indoor use in: AT, BE, BG, CH, CY, CZ, DE, DK,
EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI).
In accordance with the relevant statutory requirements in the UK, the 5150 to 5350 MHz frequency range
is restricted to indoor use in the United Kingdom.
Frequency Bands and Power
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this

12
radio equipment are as follows: Wi-Fi 2.4GHz: 20 dBm, Wi-Fi 5GHz: 5150-5350 MHz: 23 dBm, 5470-5725
MHz: 30 dBm.
Legal Notice
Copyright © Huawei 2022. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND
OF WARRANTIES.
Trademarks and Permissions
Wi-Fi
®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
Other trademarks, product, service and company names mentioned may be the property of their
respective owners.
Version Update
In order to improve the security of the product and provide you with a better user experience, we will push
version update information to you on a regular basis when an important update is released.
Privacy Policy
To better understand how we use and protect your personal information, please see the privacy policy at
https://consumer.huawei.com/privacy-policy.
End User License Agreement
Please read and agree to the End User License Agreement (HUAWEI EULA) on the product’s
management page before using the product.
For More Help
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email
address in your country or region.

13
Getting Started
RESET button
Power portH button Indicator
2 3
4
5
1
Quick Start Guide
WAN/LAN auto-adaptation port: Connects to the Internet (such as optical modem,
broadband modems, etc.) and wired network device such as a computer.
1
32 4 5

14
POWER
LAN
PON
RESET
Step 1: Connecting the cables
WAN
LAN Internet
Optical/Broadband/cable modem
(from your broadband provider)
•Erect the all antennae upright to ensure optimised Wi-Fi®signal.
•If the indicator stays red, this indicates that the router is not connected to the Internet.
Please refer to "Step 2: Conguring the network settings".
•For routers that support WAN/LAN auto-adaptation, the network ports are WAN/
LAN combo ports. You can also specify a xed WAN port on the router's web-based
management page.

15
XXXXXX Wi-Fi Name: XXXXXX
1Connect your mobile phone or computer
to the router's Wi-Fi network (no password
required).
Check for the Wi-Fi name on the bottom of
the new router.
Wi-Fi
Wi-Fi
Connected
2Open the browser, you will be
automatically redirected.
(If the page is not displayed
automatically, enter 192.168.3.1) .
GET STARTED
Step 2: Conguring the network settings
Touch GET STARTED and chose
Create a Wi-Fi network.

16
3Enter your broadband account and password.
If your Internet connection does not require an account and password, please skip to the
next step.
Internet access wizard
Broadband account
Broadband password
VLAN
Next
•If you have forgotten your broadband account
and password, contact your broadband
network provider to obtain a broadband
account and password.
• If you need to congure VLAN on your
network, contact your broadband network
provider to conrm the VLAN parameters, and
enable the VLAN switch on the screen.

17
4Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.
Internet access wizard
Prioritise 5 GHz
Wi-Fi network name
Wi-Fi network password
Login password
Internet access wizard
Conguration complete.
Enable Prioritise 5 GHz: Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal
strength is equal to increase connection speeds.
Conrm password
Next