Huawei FusionModule5000 Technical specifications

FusionModule5000 Smart Modular Data Center
V100R001
Product Description
Issue
01-(20170227)
Date
2017-02-27
HUAWEI TECHNOLOGIES CO., LTD.

Issue Draft A (2017-01-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
[e-mail]

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
ii
About This Document
Purpose
This document describes the smart modular data center (smart module for short) as well as its
application scenarios and system architecture, providing the systemic information about the
smart module.
Intended Audience
This document is intended for:
⚫Sales engineers
⚫Technical support engineers
⚫System engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
iii
Symbol
Description
Calls attention to important information, best practices
and tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
iv
Contents
About This Document ............................................................................................................... ii
1 Overview ................................................................................................................................... 1
1.1 Product Model....................................................................................................................................................... 1
1.2 Positioning............................................................................................................................................................ 1
1.3 Features................................................................................................................................................................. 1
2 Typical Configurations............................................................................................................ 4
2.1 Typical Application Scenarios................................................................................................................................ 4
2.2 Typical Configurations........................................................................................................................................... 4
2.2.1 Configurations for the Single-Row 1200 mm Wide Aisle Containment ................................................................ 5
2.2.2 Configurations for the Dual-Row 1200 mm Wide Aisle Containment................................................................... 7
3 System Architecture................................................................................................................. 9
3.1 System Architecture............................................................................................................................................... 9
3.1.1 Components of the Single-Row 1200 mm Wide Aisle Containment ..................................................................... 9
3.1.2 Components of the Dual-Row 1200 mm Wide Aisle Containment ......................................................................10
3.1.3 IT Cabinet .........................................................................................................................................................12
3.1.4 Network Cabinet................................................................................................................................................14
3.1.5 Skylight.............................................................................................................................................................15
3.1.6 End Doors for Aisles..........................................................................................................................................18
3.1.7 Cable Trough.....................................................................................................................................................19
3.1.8 (Optional) Adaptive Frame.................................................................................................................................20
3.1.9 (Optional) Base .................................................................................................................................................21
3.2 Power Supply and Distribution System .................................................................................................................22
3.2.1 Power Supply and Distribution System of Smart Module A................................................................................23
3.2.2 Power Supply and Distribution System of Smart Module B................................................................................25
3.2.3 Integrated UPS Cabinet......................................................................................................................................27
3.2.4 Precision PDC...................................................................................................................................................30
3.2.5 New Main Way..................................................................................................................................................34
3.2.6 Battery Cabinet..................................................................................................................................................36
3.2.7 PDU2000 ..........................................................................................................................................................39
3.2.8 Intelligent Battery Monitoring System................................................................................................................40
3.2.8.1 CIM................................................................................................................................................................41
3.2.8.2 BIM................................................................................................................................................................51

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
v
3.3 Cooling System....................................................................................................................................................52
3.3.1 System Description............................................................................................................................................53
3.3.2 NetCol5000-C 30 kW........................................................................................................................................53
3.3.2.1 Components....................................................................................................................................................54
3.3.2.1.1 Cooling Components....................................................................................................................................54
3.3.2.1.2 Controller ....................................................................................................................................................55
3.3.2.1.3 Monitoring System.......................................................................................................................................56
3.3.2.2 Working Conditions........................................................................................................................................56
3.3.2.3 Technical Specifications..................................................................................................................................58
3.3.2.4 Performance Curves........................................................................................................................................61
3.4 Management System.............................................................................................................................................63
3.4.1 System Description............................................................................................................................................64
3.4.2 Server................................................................................................................................................................65
3.4.3 ECC800.............................................................................................................................................................66
3.4.4 LAN Switch ......................................................................................................................................................72
3.4.5 Video System.....................................................................................................................................................73
3.4.5.1 IP Camera.......................................................................................................................................................73
3.4.5.2 VCN500.........................................................................................................................................................75
3.4.6 Skylight Control System....................................................................................................................................76
3.4.6.1 Skylight Actuator............................................................................................................................................76
3.4.7 Access Control System ......................................................................................................................................79
3.4.7.1 Access Actuator ..............................................................................................................................................79
3.4.7.2 Aisle Access Control.......................................................................................................................................83
3.4.7.3 (Optional) Cabinet Access Control System ......................................................................................................87
3.4.8 (Optional) Water Sensor.....................................................................................................................................88
3.4.9 (Optional) Smoke Detector ................................................................................................................................89
3.4.10 (Optional) Temperature Sensor.........................................................................................................................90
3.4.11 Multi-Functional Sensor...................................................................................................................................91
3.4.12 Rack Environment Unit ...................................................................................................................................93
3.4.13 Smart ETH Gateway........................................................................................................................................95
3.4.14 WiFi Converter................................................................................................................................................97
3.4.15 Alarm Beacon..................................................................................................................................................99
3.4.16 PAD ..............................................................................................................................................................100
3.5 Cable Management.............................................................................................................................................101
3.6 Lighting System .................................................................................................................................................103
3.6.1 AC Actuator.....................................................................................................................................................103
3.6.2 Aisle Lights.....................................................................................................................................................106
3.7 Surge Protection and Grounding System .............................................................................................................107
3.7.1 Surge Protection Solution.................................................................................................................................107
3.7.2 Grounding Solution .........................................................................................................................................107
3.8 Integrated Cabling System..................................................................................................................................109
3.8.1 Cable Trough...................................................................................................................................................109

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
vi
3.8.2 Cable Routes for the Dual-RowAisle Containment Scenario (New Main Way).................................................111
3.8.3 Cables.............................................................................................................................................................113
A Acronyms and Abbreviations............................................................................................ 114

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
1
1 Overview
1.1 Product Model
Table 1-1 shows the model of the smart module. Table 1-2 describes the model naming
conventions.
Table 1-1 Smart module model
Fusion
Module
5000
1
2
Table 1-2 Model naming conventions
No.
Category
Definition
1
Product name
Smart modular data center
2
Scenario
5000: using chilled water air conditioners
1.2 Positioning
The smart modular data center solution is designed for a medium- and large-sized data center
that covers an area of 300 m2or more and uses chilled water for cooling. The solution applies
to data centers for telecom, finance, government, energy, power, and traffic sectors, Internet
service providers (ISPs), and large-sized enterprises.
1.3 Features
The smart modular data center features high integration, outstanding security and reliability,
space saving, high energy efficiency, quick installation, optimal compatibility, fast and

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
2
flexible deployment, and excellent monitoring. It is a new-generation smart modular data
center solution.
Integration
⚫The smart module integrates a cabinet system, power supply and distribution system,
cooling system, facility management system, surge protection and grounding system, fire
extinguishing system, and integrated cabling system. It provides an overall solution.
⚫The integrated power supply and distribution system has an automatic transfer switch
(ATS), and distributes power to uninterruptible power systems (UPSs), air conditioners,
and IT equipment.
You are advised to deploy batteries independently when the input power is 380 Vand more than four
battery cabinets are configured or when the input power is 480 V.
Security and Reliability
⚫The smart module supports optional aisle and cabinet access control, which prevents
unauthorized personnel from entering the smart module and improves security.
⚫The auxiliary fire extinguishing system improves the equipment room security. It
consists of the rotating skylight which starts automatically when fire occurs, and the
emergency button which helps open the door in emergencies.
⚫The smart module supports two power inputs.
⚫Each UPS is equipped with a manual maintenance bypass switch. When the smart
module is working properly, the switch is locked to prevent misoperations.
⚫Modular UPSs work in N+1 redundancy mode to improve the reliability of the smart
module.
⚫Strong current and weak current cables, optical fibers, and network cables are routed
separately to minimize electromagnetic interference.
⚫The positive temperature coefficient (PTC) electric heater of the air conditioner provides
dual protection functions: automatic reset and auto-recovery disabling.
Space Saving and Energy Efficiency
⚫The smart module can be placed in a room of an office building.
⚫The smart module can be directly installed on a concrete floor in a building, which
simplifies engineering.
⚫Equipment room area ≥ 300 m2.
⚫Aisle lighting is available, saving electric energy.
⚫The smart module is delivered within a few days and can be quickly installed onsite,
which reduces cost.
Quick Installation
⚫The design minimizes the workload of engineering.
⚫The standardized installation procedures reduce the installation time and workload.
Optimal Compatibility
Modular power distribution allows for flexible expansion.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
3
Fast and Flexible Deployment
⚫The integrated design supports relocation of communications equipment with offices.
⚫Single-row cabinets or dual-row cabinets are deployed based on the equipment room size,
power consumption of a single cabinet, and expansion requirements.
⚫IT cabinets are flexibly equipped with servers as well as storage and network equipment
to meet enterprise requirements for web application and internal services.
Excellent Monitoring
⚫Various sensors monitor modules in the data center in real time.
⚫The web-based monitoring system enables remote management of modules.
Stable Cooling
The NetCol5000-C features efficient cooling, effective energy saving, high reliability, wide
working conditions, wide power range, high compatibility, intelligent monitoring, and easy
maintenance.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
4
2 Typical Configurations
2.1 Typical Application Scenarios
Based on the product layout, there are three types of architecture: smart module A (with the
battery cabinet in the aisle containment), smart module A (without the battery cabinet in the
aisle containment) and smart module B.
⚫For smart module A (with the battery cabinet in the aisle containment), the UPS, air
conditioners, and batteries are installed inside the module.
⚫For smart moduleA (without the battery cabinet in the aisle containment), the batteries
are installed outside the module while the UPS and air conditioners are installed inside
the module.
⚫For smart module B, the UPS and batteries are installed outside the module while the
precision power distribution cabinet (PDC) or new main way is inside the module.
This document uses the smart module A as an example.
2.2 Typical Configurations
The Smart Module is typically configured with the single-row or dual-row 1200 mm wide
aisle containment.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
5
2.2.1 Configurations for the Single-Row 1200 mm Wide Aisle
Containment
Figure 2-1 Single-row aisle containment (power supply and distribution cabinet)
Figure 2-2 Single-row aisle containment(new main way)

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
6
Figure 2-3 Floor plan of the single-row 1200 mm wide aisle containment (power supply and
distribution cabinet)
The PDC refers to the precision PDC or integrated UPS cabinet.
Table 2-1 lists the key technical specifications of the single-row 1200 mm wide aisle
containment.
Table 2-1 Key technical specifications
Item
Technical Specifications
Number of IT
cabinets
6 to 24 cabinets
Equipment room
space
⚫In the scenario where the new main way is deployed, the minimum
floor height is 3.0 m when 2.0 m high IT cabinets are deployed and
is 3.2 m high when 2.2 m high IT cabinets are deployed.
⚫In the scenario where the new main way is not deployed, the
minimum floor height is 2.6 m when 2.0 m high IT cabinets are
deployed and is 2.8 m high when 2.2 m high IT cabinets are
deployed.
Cooling
NetCol5000-C 30 kW chilled water in-row precision air conditioner
Power
distribution
⚫Smart module A: integrated UPS cabinet
⚫Smart module B: precision PDC or new main way
Aisle
1200 mm wide single-row cold or hot aisle containment

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
7
2.2.2 Configurations for the Dual-Row 1200 mm Wide Aisle
Containment
Figure 2-4 Dual-row aisle containment(power supply and distribution cabinet)
Figure 2-5 Dual-row aisle containment (new main way)

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
8
Figure 2-6 Floor plan of the dual-row 1200 mmwide aisle containment (power supply and
distribution cabinet)
The PDC refers to the precision PDC or integrated UPS cabinet.
Table 2-2 lists the key technical specifications of the dual-row 1200 mm wide aisle
containment.
Table 2-2 Key technical specifications
Item
Technical Specifications
Number of IT
cabinets
6 to 48 cabinets (max. 24 cabinets in the N+1 system; max. 48 cabinets
in the 2N system; max. module length: 15 m)
Equipment room
space
⚫In the scenario where the new main way is deployed, the minimum
floor height is 3.0 m when 2.0 m high IT cabinets are deployed and
is 3.2 m high when 2.2 m high IT cabinets are deployed.
⚫In the scenario where the new main way is not deployed, the
minimum floor height is 2.6 m when 2.0 m high IT cabinets are
deployed and is 2.8 m high when 2.2 m high IT cabinets are
deployed.
Cooling
NetCol5000-C 30 kW chilled water in-row precision air conditioner
Power
distribution
⚫Smart module A: integrated UPS cabinet
⚫Smart module B: precision PDC or new main way
Aisle
1200 mm wide dual-row cold or hot aisle containment

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
9
3 System Architecture
3.1 System Architecture
3.1.1 Components of the Single-Row 1200 mm Wide Aisle
Containment
Overview
The single-row 1200 mm wide aisle containment can be a cold or hot aisle containment that
involves the following components: IT cabinet, network cabinet, PDC (refer to the precision
PDC or integrated UPS cabinet), air conditioner, battery cabinet, skylight, end door, and cable
trough. Figure 3-1 shows the components of a cold aisle containment.
Figure 3-1 Components of the single-row 1200 mm wide cold aisle containment (power supply
and distribution cabinet)
(1) End door
(2) Flat or rotating skylight
(3) Control skylight

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
10
(4) Cable trough
(5) Smart ETH gateway
(6) Cabinet
(7) Alarm beacon
(8) Pad
(9) Access control device
Figure 3-2 Components of the single-row 1200 mm wide cold aisle containment (new main way)
(1) General input unit
(2) Control skylight
(3) Alarm beacon
(4) Power distribution unit
(5) Busbar trunking unit
(6) Flat or rotating skylight
(7) Cable trough
(8) Cabinet
(9) Pad
(10) Access control device
(11) End door
3.1.2 Components of the Dual-Row 1200 mm Wide Aisle
Containment
Overview
The dual-row 1200 mm wide aisle containment can be a cold or hot aisle containment that
involves the following components: IT cabinet, network cabinet, PDC (refer to the precision
PDC or integrated UPS cabinet), air conditioner, battery cabinet, skylight, end door, and cable
trough. Figure 3-3 shows the components of a cold aisle containment.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
11
Figure 3-3 Components of the dual-row 1200 mm wide cold aisle containment(power supply and
distribution cabinet)
(1) End door
(2) Flat or rotating skylight
(3) Control skylight
(4) Cable trough
(5) Smart ETH gateway
(6) Cabinet
(7) Alarm beacon
(8) Pad
(9) Access control device
Figure 3-4 Components of the dual-row 1200 mm wide cold aisle containment (new main way)
(1) General input unit
(2) Control skylight
(3) Alarm beacon

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
12
(4) Power distribution unit
(5) Busbar trunking unit
(6) Flat or rotating skylight
(7) Cable trough
(8) Cabinet
(9) Pad
(10) Access control device
(11) End door
3.1.3 IT Cabinet
IT cabinets of the Smart Module comply with the International Electrotechnical Commission
(IEC) 60297-1 standard, provide stable installation space for servers in the Smart Module, and
ensure secure server running.
The cabinets have the uniform dimensions and provide front and rear ventilation channels.
Figure 3-5shows the cabinet exterior. Table 3-1 lists the technical specifications.
Figure 3-5 IT cabinet appearance
An IT cabinet has the following features:
⚫The ventilation rate of the front and rear doors is greater than or equal to 70%.
⚫Two power distribution units (PDU2000s) can be vertically installed at the rear inside the
cabinet.
⚫The position of each U is marked on the vertical mounting bars.
⚫The front and rear doors of the cabinet can be locked, and can be unlocked only by using
dedicated keys.
⚫The cabinet has a door status sensor or electronic access control.

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
13
⚫Static load: 1500 kg
Table 3-1 Cabinet technical specifications
Item
Specifications
Dimensions (H x W
x D)
⚫2000 mm x 600 mm x 1100 mm
⚫2000 mm x 600 mm x 1200 mm
⚫2000 mm x 800 mm x 1100 mm
⚫2000 mm x 800 mm x 1200 mm
⚫2200 mm x 600 mm x 1200 mm
⚫2200 mm x 800 mm x 1200 mm
Color
Black
Materials
High-intensity class A carbon cold rolled steel sheet and zinc-coated
steel sheet
Ventilation channel
Front and rear ventilation channels
Installation space
⚫A 2000 mm high cabinet provides 42 U installation space.
⚫A 2200 mm high cabinet provides 47 U installation space.
⚫The distance between the front and rear mounting bars can be
adjusted for every 25 mm.
−For a 1200 mm deep cabinet: The maximum depth for
installing devices inside the cabinet is 750 mm and by
adjusting the mounting bars the maximum depth is 850 mm.
−For a 1100 mm deep cabinet: The maximum depth for
installing devices inside the cabinet is 700 mm and by
adjusting the mounting bars the maximum depth is 750 mm.
⚫Positions for vertically installing two PDU2000s are provided at
the rear of the cabinet.
Installation mode
ESD floor, base, or concrete floor
Door opening mode
The front door is a single door, and the rear door is a double one.
Weight of an empty
cabinet
⚫The weight of a 2000 mm x 600 mm x 1200 mm cabinet is 128
kg.
⚫The weight of a 2000 mm x 800 mm x 1200 mm cabinet is 153
kg.
⚫The weight of a 2200 mm x 600 mm x 1200 mm cabinet is 137
kg.
⚫The weight of a 2200 mm x 800 mm x 1200 mm cabinet is 164
kg.
⚫The weight of a 2000 mm x 600 mm x 1100 mm cabinet is 110
kg.
⚫The weight of a 2000 mm x 800 mm x 1100 mm cabinet is 135
kg.
(The weight of an empty cabinet includes the weight of the front and
rear doors.)