Huawei ES3000 V5 User manual

ES3000 V5 SAS SSD
User Guide
Issue 06
Date 2019-03-19
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. i

About This Document
Purpose
This document provides the product information about the Huawei ES3000 V5 SAS SSD
(ES3000 V5 for short) and describes how to install, configure, operate, and maintain the
ES3000 V5.
NOTE
The document does not contain the commands for production, equipment, and return detection. These
commands are commonly used during engineering implementation and fault locating. Incorrect use of
the commands results in device faults or service interruption. To obtain the commands, contact Huawei
technical support.
Intended Audience
This document is intended for:
lServer installation engineers
lServer maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
ES3000 V5 SAS SSD
User Guide About This Document
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. ii

Symbol Description
Calls attention to important information, best practices
and tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Provides a tip that may help you solve a problem or save
time.
Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Issue Date Description
06 2019-03-19 Modified notes on the hot swap function.
05 2019-03-11 Modified the outputs of some commands.
04 2018-12-22 Modified the Information Collection chapter.
03 2018-10-23 Modified information about how to upgrade
controller firmware.
02 2018-08-06 Added operations for querying basic
information of a specified device.
01 2018-07-20 This issue is the first official release.
ES3000 V5 SAS SSD
User Guide About This Document
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. iii

Contents
About This Document.....................................................................................................................ii
1 Safety................................................................................................................................................1
1.1 General Safety Notice.....................................................................................................................................................1
1.2 Labels on Devices...........................................................................................................................................................2
1.3 Electrical Safety..............................................................................................................................................................3
2 Getting to Know the ES3000 V5..................................................................................................6
2.1 Security...........................................................................................................................................................................6
2.2 Overview........................................................................................................................................................................ 7
2.3 Features...........................................................................................................................................................................8
2.4 Specifications..................................................................................................................................................................9
2.4.1 ES3500S V5 Specifications.........................................................................................................................................9
2.4.2 ES3600S V5 Specifications....................................................................................................................................... 11
2.5 System Requirements................................................................................................................................................... 14
3 Installation and Configuration................................................................................................. 15
3.1 Installation and Configuration Process.........................................................................................................................15
3.2 Installing the ES3000 V5 SAS SSD............................................................................................................................. 16
3.3 Verifying the Upgrade Package Integrity..................................................................................................................... 20
3.4 Transferring Files by Using WinSCP........................................................................................................................... 20
3.5 Installing the Tool Package...........................................................................................................................................22
3.5.1 Installing the Tool Package (Linux).......................................................................................................................... 22
3.5.2 Installing the Tool Package (Windows).....................................................................................................................23
3.5.3 Installing the Tool Package (ESXi)........................................................................................................................... 28
4 Hot Swap....................................................................................................................................... 30
4.1 OSs Supporting Hot Swap............................................................................................................................................30
4.2 Surprise Hot Swap........................................................................................................................................................ 30
5 Maintenance and Upgrade.........................................................................................................31
5.1 Uninstalling and Upgrading the Tool Package............................................................................................................. 31
5.1.1 Uninstalling the Tool Package (Linux)......................................................................................................................31
5.1.2 Uninstalling the Tool Package (Windows)................................................................................................................ 32
5.1.3 Uninstalling the Tool (ESXi).....................................................................................................................................33
5.1.4 Upgrading the Tool Package (Linux)........................................................................................................................ 33
ES3000 V5 SAS SSD
User Guide Contents
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. iv

5.1.5 Upgrading the Tool Package (Windows)...................................................................................................................34
5.1.6 Upgrading the Tool (ESXi)........................................................................................................................................34
5.2 Upgrading the Controller Firmware............................................................................................................................. 34
5.2.1 Upgrade Paths............................................................................................................................................................35
5.2.2 Upgrading the SSD Firmware in Linux (SAS SSD)................................................................................................. 35
5.2.2.1 Upgrading the SSD Firmware if a 3108, 3408, or 3508 RAID Card Is Configured.............................................. 36
5.2.2.1.1 No RAID Group Created (JBOD Mode).............................................................................................................36
5.2.2.1.2 RAID Group Created (RAID Mode)................................................................................................................... 37
5.2.2.2 Upgrading the SSD Firmware if a 3008 RAID Card Is Configured...................................................................... 37
5.2.2.2.1 No RAID Group Created (JBOD Mode).............................................................................................................38
5.2.2.2.2 RAID Group Created (RAID Mode)................................................................................................................... 39
5.2.2.3 No RAID Card (Direct-Connection Mode)............................................................................................................ 40
5.2.3 Upgrading the SSD Firmware in Windows (SAS SSD)............................................................................................40
5.2.3.1 Upgrading the SSD Firmware if a 3108, 3408, or 3508 RAID Card Is Configured.............................................. 41
5.2.3.1.1 No RAID Group Created (JBOD Mode).............................................................................................................41
5.2.3.1.2 RAID Group Created (RAID Mode)................................................................................................................... 42
5.2.3.2 Upgrading the SSD Firmware if a 3008 RAID Card Is Configured...................................................................... 43
5.2.3.2.1 No RAID Group Created (JBOD Mode).............................................................................................................43
5.2.3.2.2 RAID Group Created (RAID Mode)................................................................................................................... 44
5.2.3.3 No RAID Card (Direct-Connection Mode)............................................................................................................ 46
5.2.4 Upgrading the SSD Firmware in VMware (SAS SSD).............................................................................................46
5.2.4.1 Upgrading the SSD Firmware if a 3108, 3408, or 3508 RAID Card Is Configured.............................................. 46
5.2.4.1.1 No RAID Group Created (JBOD Mode).............................................................................................................46
5.2.4.1.2 RAID Group Created (RAID Mode)................................................................................................................... 47
5.2.4.2 Upgrading the SSD Firmware if a 3008 RAID Card Is Configured...................................................................... 48
5.2.4.2.1 No RAID Group Created (JBOD Mode).............................................................................................................48
5.2.4.2.2 RAID Group Created (RAID Mode)................................................................................................................... 49
5.2.4.3 No RAID Card (Direct-Connection Mode)............................................................................................................ 51
5.3 Querying Health Status.................................................................................................................................................51
5.4 Information Collection................................................................................................................................................. 51
5.4.1 Collecting SSD Information...................................................................................................................................... 52
5.4.2 Collecting SSD Logs................................................................................................................................................. 53
5.4.3 One-Click Log Collection......................................................................................................................................... 53
5.5 Securely Erasing SSD Data.......................................................................................................................................... 54
5.6 Querying SSD Lifespans.............................................................................................................................................. 55
5.7 Common Faults.............................................................................................................................................................56
5.7.1 Hardware Connection Faults or Other Faults............................................................................................................ 56
5.7.2 Drive Identification Faults or Other Faults................................................................................................................57
5.7.3 Drive Internal Faults or Other Faults.........................................................................................................................57
5.8 Indicator Status Descriptions........................................................................................................................................59
5.8.1 ES3000 SSD Indicator Status.................................................................................................................................... 59
5.9 Removing an ES3000 V5 SAS SSD.............................................................................................................................59
ES3000 V5 SAS SSD
User Guide Contents
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. v

6 Command Description............................................................................................................... 61
6.1 Querying Information................................................................................................................................................... 62
6.1.1 Querying the SSD List...............................................................................................................................................62
6.1.2 Querying Basic Information About an SSD Device List.......................................................................................... 63
6.1.3 Querying Basic Information About a Device............................................................................................................ 64
6.1.4 Querying the SMART Information About a Device..................................................................................................66
6.1.5 Querying Advanced Information of a Device........................................................................................................... 68
6.1.6 Querying Thresholds of a Device..............................................................................................................................71
6.2 Querying, Upgrading, and Activating Firmware..........................................................................................................73
6.2.1 Querying the Firmware Version of an SSD............................................................................................................... 73
6.2.2 Upgrading the Firmware of an SSD.......................................................................................................................... 74
6.2.3 Activating the Firmware of an SSD.......................................................................................................................... 75
6.3 Querying and Setting the Capacity...............................................................................................................................76
6.3.1 Querying the Capacity of an SSD..............................................................................................................................76
6.3.2 Setting the Capacity of an SSD................................................................................................................................. 77
6.4 Formatting.................................................................................................................................................................... 78
6.4.1 Formatting a Logical Drive....................................................................................................................................... 79
6.4.2 Formatting an SSD.................................................................................................................................................... 80
6.5 Safely Erasing User Data of an SSD............................................................................................................................ 83
6.6 Querying and Setting the Power Consumption Level.................................................................................................. 84
6.6.1 Querying the Power Consumption Level of an SSD.................................................................................................84
6.6.2 Setting the Power Consumption Level of an SSD.....................................................................................................85
6.7 Obtaining Logs............................................................................................................................................................. 86
6.7.1 Obtaining Logs of a Device.......................................................................................................................................86
6.7.2 Obtaining All Logs of a Device At a Time................................................................................................................87
6.8 Querying and Setting Temperature Thresholds............................................................................................................ 87
6.8.1 Querying the Temperature Information About a Device...........................................................................................87
6.8.2 Setting the Temperature Thresholds of a Device.......................................................................................................89
6.9 Querying the Diagnosis Result of a Specified SSD..................................................................................................... 90
6.10 Querying the Electronic Label Information About an SSD........................................................................................91
6.11 Setting and Querying Time Synchronization..............................................................................................................92
6.11.1 Querying the Time of a Specified SSD....................................................................................................................92
6.11.2 Synchronizing the Time of a Specified SSD........................................................................................................... 93
6.12 Erasing a Specified SSD.............................................................................................................................................93
6.13 Recovering Data......................................................................................................................................................... 95
6.13.1 Recovering Data for an SSD................................................................................................................................... 95
6.13.2 Querying the SSD Data Common Recovery Progress............................................................................................ 96
A Supported SAS Commands......................................................................................................97
A.1 SCSI Commands..........................................................................................................................................................97
A.2 Task Management Commands...................................................................................................................................100
A.3 ModePage Support.....................................................................................................................................................100
A.4 Log Page Support...................................................................................................................................................... 101
ES3000 V5 SAS SSD
User Guide Contents
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. vi

A.5 SMART Support........................................................................................................................................................ 102
A.6 VPD Commands........................................................................................................................................................ 105
B Introduction to Windows GUI............................................................................................... 107
C Getting Help.............................................................................................................................. 113
C.1 Collecting Fault Information......................................................................................................................................113
C.2 Preparing for Debugging............................................................................................................................................113
C.3 Using Product Documentation................................................................................................................................... 113
C.4 Obtaining Technical Support......................................................................................................................................114
D Acronym or Abbreviation.......................................................................................................115
ES3000 V5 SAS SSD
User Guide Contents
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. vii

1 Safety
About This Chapter
This section describes the safety precautions to be observed when you install and maintain
devices.
1.1 General Safety Notice
1.2 Labels on Devices
1.3 Electrical Safety
1.1 General Safety Notice
This section describes the safety precautions you must take before installing or maintaining
Huawei equipment.
Overview
lTo ensure safety of humans and the equipment, pay attention to the safety symbols on the
equipment and all the safety instructions in this document.
lThe "NOTE", "CAUTION", and "WARNING" marks in other documents do not
represent all the safety instructions. They are only supplements to the safety instructions.
Local Safety Regulations
When operating Huawei equipment, you must follow the local laws and regulations. The
safety instructions in this document are only supplements to the local laws and regulations.
Basic Requirements
lInstallation and maintenance personnel must understand basic safety precautions to avoid
hazards.
lWhen operating Huawei equipment, in addition to following the general precautions in
this document, follow the specific safety instructions given by Huawei.
lOnly trained and qualified personnel are allowed to install, operate, and maintain Huawei
equipment.
ES3000 V5 SAS SSD
User Guide 1 Safety
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 1

Ground
lDo not damage the ground conductor or operate the device in the absence of a properly
installed ground conductor. Conduct the electrical inspection carefully.
lThe device must be connected permanently to the protection ground before an operation.
Human Safety
lDuring lightning strikes, do not operate the device or cables, use fixed terminals, or
touch terminals or antenna connectors. Do remove AC power connectors.
NOTE
This requirement applies to wireless fixed terminals.
lTo prevent electric shocks, do not connect safety extra-low voltage (SELV) circuit
terminals to telecommunication network voltage (TNV) circuit terminals.
lDo not look into the optical port without eye protection.
lBefore operating the device, wear ESD clothes, ESD gloves, and an ESD wrist strap.
Remove conductive objects such as jewelry and watches to avoid electric shocks or
burns.
lIf a fire occurs, evacuate the building or equipment area and press the fire alarm bell or
make a fire call. In any case, it is prohibited to enter the burning building again.
Device Safety
lBefore operating the device, secure the device to the floor or other solid objects, such as
walls or mounting brackets.
lDo not block air vents while the device is operating.
lWhen installing panels, use a tool to tighten screws.
lAfter installation is complete, clear packing materials in the equipment area.
1.2 Labels on Devices
This section describes the warning labels, grounding labels, and electrostatic discharge (ESD)
labels on devices.
Table 1-1 describes the safety labels on devices.
Table 1-1 Safety labels
Label Meaning Description
Warning This label indicates that wrong operations may
cause device damage or human injury.
External grounding This label indicates grounding of external
devices. The terminals of the ground cable are
connected to different devices. This ensures
normal running of the devices and the safety of
the operator.
ES3000 V5 SAS SSD
User Guide 1 Safety
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 2

Label Meaning Description
Internal grounding This label indicates grounding of internal
devices. The terminals of the ground cable are
connected to different components of the same
device. This ensures normal running of the
devices and the safety of the operator.
ESD-Preventive Label This label indicates a static sensitive area. Do not
touch the device with your hands. When
operating the device within this area, take
electrostatic discharge (ESD)-preventive
measures. For example, wear an ESD-preventive
wrist strap.
1.3 Electrical Safety
This section describes safety notice about high voltage, thunderstorm, high electrical leakage,
power cable, fuse, electrostatic discharge.
High Voltage
The high voltage power supply provides power for the device operation. Direct or indirect
contact (through damp objects) with high voltage and AC mains supply may result in serious
injury.
Non-standard and improper high voltage operations may result in fire and electric shock.
Thunderstorm
Do not perform any operation, including high voltage and AC operations, on a steel tower or
mast during a thunderstorm.
High Electrical Leakage
Ground the device before powering it on. Otherwise, personal injury or device damage may
be caused by high leakage current.
ES3000 V5 SAS SSD
User Guide 1 Safety
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 3

If a "high electrical leakage" tag is present on the power terminal of the device, you must
ground the device before powering it on.
Power Cable
Do not install or remove power cables when the device is on. Transient contact between the
core of the power cable and the conductor may generate electric arcs or sparks, which may
cause fire or hurt human eyes.
lBefore installing or removing the power cable, turn off the power switch.
lBefore connecting a power cable, check that the label on the power cable is correct.
Fuse
If a fuse is to be replaced, the new fuse must be of the same type and specifications.
Electrostatic Discharge
The static electricity generated by human bodies may damage the electrostatic-sensitive
components on boards, for example, the large-scale integrated (LSI) circuits.
Human body movement, friction between human bodies and clothes, friction between shoes
and floors, or handling of plastic articles causes static electromagnetic fields on human
bodies. These static electromagnetic fields cannot be eliminated until the static is discharged.
To prevent electrostatic-sensitive components from being damaged by the static on human
bodies, you must wear a well-grounded ESD wrist strap when touching the device or handling
boards or application-specific integrated circuits (ASICs).
Figure 1-1 shows how to wear an ESD wrist strap.
ES3000 V5 SAS SSD
User Guide 1 Safety
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 4

Figure 1-1 Wearing an ESD wrist strap
ES3000 V5 SAS SSD
User Guide 1 Safety
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 5

2 Getting to Know the ES3000 V5
About This Chapter
This document describes the features of ES3000 V5 SAS SSDs V100R001C00, including
ES3500S V5 and ES3600S V5.
2.1 Security
2.2 Overview
2.3 Features
2.4 Specifications
2.5 System Requirements
2.1 Security
This section describes the information security features of the ES3000 V5.
Huawei is committed to ensuring stability and security of customer networks and services.
As a storage device within a server or storage host, the ES3000 V5 provides the following
security features based on the security hardening measures taken according to the minimum
permission security rules:
lRights control: The ES3000 V5 allows only system administrators to use its device
maintenance management tools.
lOperation logs: The tool logs all the set operations on the ES3000 V5.
lSecurity assurance: A complete data clearance tool is provided to destroy data at the
NAND flash memory chip level, preventing data leakage.
lFirmware upgrade: Firmware upgrade through in-band management channels ensures
upgrade reliability and network security. The upgrade tool verifies the integrity of the
ES3000 V5 firmware upgrade file to ensure that the upgrade is successful. Firmware can
be loaded only after it is authenticated by the Hi1812E controller, which ensures
firmware validity and data security.
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 6

2.2 Overview
This section describes the ES3000 V5 appearance and standards.
Huawei ES3000 V5 series SAS SSD is an enterprise-class high-performance storage and
acceleration component. It features high performance, fast response, and high reliability,
greatly improving storage I/O performance. The ES3000 V5 SAS SSD consists of the
ES3500S V5 and ES3600S V5 series.
The ES3000 V5 SAS SSD is a 2.5-inch Serial Attached SCSI (SAS) SSD that uses the
HiSilicon Hi1812E chip and complies with the SFF-8639 standard. It can be installed in
universal servers, such as rack servers.
Figure 2-1 shows the appearance of the ES3000 V5 SAS SSD.
Figure 2-1 ES3000 V5 SAS SSD
Label
The label on an ES3000 V5 SAS SSD provides the World Wide Name (WWN) and serial
number (S/N).
A WWN uniquely identifies an ES3000 V5 SAS SSD and is a string generated from the MAC
address. A WWN is required when you apply for technical support from Huawei.
An example S/N is 031YSW10G3000001. Figure 2-2 describes the S/N format.
Figure 2-2 Example S/N
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 7

No. Description
1 Indicates the material identification code (6 characters).
2 Indicates the vendor code (two characters).
3 Indicates the year and month (two characters).
4 Indicates the serial number (six digits).
2.3 Features
The ES3000 V5 SAS SSD provides the following SAS features:
lTwo 12 GB/s SAS 3.0 ports, backward compatible with 6 GB/s and 3 GB/s networks
lSCSI SAM-5, SPC-4, and SBC-3
The ES3000 V5 SAS SSD provides the following features:
lUses the SAS 3.0 interface, complies with SAS 3.0 electrical specifications, and is
backward compatible with SAS 2.0 and 1.0.
lProvides various single-drive capacities to meet different application requirements.
–ES3500S V5 series single-drive capacities: 960 GB, 1920 GB, 3840 GB, 7680 GB,
and 15360 GB
–ES3600S V5 series single-drive capacities: 800 GB, 1600 GB, 3200 GB, and 6400
GB
lSupports standard storage device operations.
–Block device operations in Linux
–Drive device operations in Windows
–Drive device operations in ESXi
lSupports device diagnosis and detecting, and SMART information reporting.
–Checks the power supply, temperature, voltage, capacitance, and number of bad
blocks.
–Checks whether the flash component is normal.
–Monitors, queries, and warns about the SSD service life.
–Checks the SSD power consumption.
–Performs I/O statistics.
lSupports surprise hot swap (ES3500S V5 and ES3600S V5 series).
lUses multiple technologies to ensure device reliability.
–Enhanced Low-Density Parity-Check (LDPC) algorithm: provides higher error
correction capability than that required by flash chips and ensures device reliability.
–Embedded RAID-like algorithm: implements channel-based error correcting. Data
can be restored if an error occurs in a channel.
–Flexible RAID algorithm: automatically restores data on the flash memory when the
flash memory has failed and continues to perform RAID data protection.
–Intelligent wear leveling algorithm: intelligently levels the flash chip wear pressure
and prolongs the device service life.
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 8

–Advanced flash access technology: combines the read retry and adaptive read
technologies of flash chips and ensures data validity.
–Data inspection technology: periodically inspects data and prevents errors.
–Power-off protection: prevents drive data loss when a power failure occurs on the
server.
lProvides multiple maintenance and management tools with comprehensive functions and
high performance.
–Provides in-band online upgrades to facilitate routine maintenance.
–Provides comprehensive command line management functions for users to perform
routine device management by using various commands.
–Provides the manufacture dates and serial numbers to facilitate asset management.
2.4 Specifications
The ES3000 V5 SAS SSD consists of the ES3500S V5 and ES3600S V5 series.
2.4.1 ES3500S V5 Specifications
Figure 2-3 shows the nameplate for the ES3500S V5 series.
Figure 2-3 ES3500S V5 series nameplate
Table1 lists the power consumption specifications for the ES3500S V5 series.
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 9

Table 2-1 Power consumption specifications for the ES3500S V5 series
Parameter Specifications
Power
consumption
l960 GB: 9.7 W maximum power consumptiona and 4 W standby power
consumption.
l1920 GB: 12 W maximum power consumption and 4 W standby power
consumption.
l3840 GB: 13 W maximum power consumption and 4.5 W standby
power consumption.
l7680 GB: 14.4 W maximum power consumption and 4.7 W standby
power consumption.
l15360 GB: 15 W maximum power consumption and 5 W standby
power consumption.
Form Standard 2.5-inch drive
a: The maximum power consumption is the test result with the maximum sequential write
bandwidth.
Table2 lists the reliability specifications for the ES3500S V5 series.
Table 2-2 Reliability specifications for the ES3500S V5 series
Parameter Specifications
Mean time
between
failures
(MTBF)
2.5 x 106 hours
Annual
failure rate
(AFR)
≤ 0.35%
Bit error rate
(BER)
10-18
Data
protection
≥ 3 months (40°C, powered off)
Table3 lists the environmental specifications for the ES3500S V5 series.
Table 2-3 Environmental specifications for the ES3500S V5 series
Parameter Specifications
Temperature lStorage temperature: –40°C to +70°C (–40°F to +158°F)
lDrive case temperature: 0°C to 70°C (32°F to 158°F)
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 10

Parameter Specifications
Altitude lOperating: –305 m to +5486 m (–1000.64 ft to +17998.47 ft)
lNon-operating: –305 m to 12192 m (–1000.64 ft to 39999.51 ft)
The highest operating temperature decreases by 1°C (1.8°F) for every
increase of 220 m (721.78 ft) in altitude.
Air speed 960 GB
l> 155 LFM at a room temperature of 25°C (77°F)
l> 650 LFM at a room temperature of 35°C (95°F)
1920 GB
l> 155 LFM at a room temperature of 25°C (77°F)
l> 650 LFM at a room temperature of 35°C (95°F)
3840 GB
l> 155 LFM at a room temperature of 25°C (77°F)
l> 650 LFM at a room temperature of 35°C (95°F)
7680 GB
l> 155 LFM at a room temperature of 25°C (77°F)
l> 650 LFM at a room temperature of 35°C (95°F)
15360 GB
l> 155 LFM at a room temperature of 25°C (77°F)
l> 650 LFM at a room temperature of 35°C (95°F)
Humidity lStorage humidity: 5% RH to 95% RH
lOperating humidity: 5% RH to 95% RH
Vibration lOperating vibration: 2.17 GRMS (5 Hz to 700 Hz)
lNon-operating vibration: 3.13 GRMS (5 Hz to 800 Hz)
Shock lOperating shock: 1000 G/0.5 ms
lNon-operating shock: 1000 G/0.5 ms
2.4.2 ES3600S V5 Specifications
Nameplates
Figure 2-4 shows the nameplate for the ES3600S V5 series.
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 11

Figure 2-4 ES3600S V5 series nameplate
Table1 lists the power consumption specifications for the ES3600S V5 series.
Table 2-4 Power consumption specifications for the ES3600S V5 series
Parameter Specifications
Power
consumption
l800 GB: 9.7 W maximum power consumptiona and 4 W standby power
consumption.
l1600 GB: 12 W maximum power consumption and 4 W standby power
consumption.
l3200 GB: 13 W maximum power consumption and 4.5 W standby
power consumption.
l6400 GB: 14.4 W maximum power consumption and 4.7 W standby
power consumption.
Form Standard 2.5-inch drive
a: The maximum power consumption is the test result with the maximum sequential write
bandwidth.
Power consumption specifications in the preceding table are test results based on CentOS 7.0
and the standard storage test tool fio 2.6, with the ES3600S V5 formatted into a 512-byte
LBA block device.
Table2 lists the reliability specifications for the ES3600S V5 series.
Table 2-5 Reliability specifications for the ES3600S V5 series
Parameter Specifications
Mean time between
failures (MTBF)
2.5 x 106 hours
ES3000 V5 SAS SSD
User Guide 2 Getting to Know the ES3000 V5
Issue 06 (2019-03-19) Copyright © Huawei Technologies Co., Ltd. 12