Huawei B882 User manual

B882 4G LTE Smart Hub
Getting Started Guide

1
Thank You for Purchasing the B882 4G LTE Smart
Hub!
Before You Begin
What’s in the Box :
1. B882 4G LTE Smart Hub
2. Power adapter
3. 1 Ethernet cable (Yellow)
4. Getting Started Guide
5. Safety Information Guide
6. Warranty Information Guide
If anything is missing or damaged, return the entire p
ackage to your point of
purchas
e.

2
1Getting Started: Setting up your
B882 4G LTE Smart Hub
Follow these simple steps to setup your 4G LTE Smart Hub.
Place the 4G LTE Smart Hub at an indoor open area or close to a window if
possible. Obstructions such as concrete or wooden walls may affect the
transmission of wireless signals.
Keep the 4G LTE Smart Hub away from the household electrical appliances that
produce strong electric or magnetic fields, such as microwaves, refrigerators, or
satellite dish antennas.
Step 1 Insert SIM card into the Smart Hub’s SIM Card Slot.

If your SIM card was not activated and
inserted into your 4G LTE Smart Hub at your
point of purchase, please call TELUS customer Care at 1-866-558-2273 to activate
it now.

Before removing the SIM card, ensure that Smart Hub is powered off and
disconnected from the power outlet.

3
Step 2 Connect the power adapter to the power port and plug into the wall
socket.
The Smart Hub will power on automatically.
The AC power supply included with the Huawei B882 4G LTE Smart Hub is not
compatible with the Huawei B890 4G LTE Smart Hub. Interchanging the AC power
supply will cause damage to the AC power
supply.

4
2Getting Started: Setting up an
Internet Connection
Connecting your devices (computer, laptop, tablet, etc.) to the Internet
You are able to connect to the Internet via a wired or wireless (Wi-Fi) connection.
Follow the instructions below to set up your connection of choice.
Wired connection with an Ethernet Cable
Step 1 Connect the Yellow Ethernet cable provided to one of the 3 LAN ports
and connect the other end to your computer.
Step 2 Wait approximately 30 - 60 seconds for the connection to establish. Check
the indicators on the front panel of your Smart Hub. If they are lit as
outlined you are ready to use the internet with your new Smart Hub!
Do not
connect the Yellow Ethernet cable to the WAN port that is closest to the
right hand side of the device.

5
Power
Solid White: the Smart Hub is powered on.
Wireless Signal
indicator
Solid Blue or Cyan: the Smart Hub is registered
with the wireless network.
If this indicator is red and blinking, power off the
Smart Hub and ensure your SIM card is inserted
correctly.
If this continues after turning the 4G LTE Smart
Hub on again, please contact TELUS at 1-866-
558-2273 to ensure your SIM card is activated.
Wireless Dial-up
indicator
Solid: the Smart Hub is connected to the
wireless network.
If this indicator is blinking continuously, power
off the Smart Hub for 2 minutes and try again.
/ /
LAN indicators
Solid: 1, 2 or 3 will be lit depending on which
LAN port you are connected to.
Blinking: data is transferring.

6
Wireless (Wi-Fi) Connection
Follow these simple steps to connect up to 32 Wi-Fi enabled devices to the Internet
through your 4G LTE Smart Hub:
Step 1 Ensure that on the front panel is solid and Wi-Fi is enabled on your
device (computer, laptop, tablet, etc.).
Step 2 From your device, scan for wireless networks in your area. Connect to the
network name that matches the Wi-Fi Name (SSID) found on the Wireless
Security Sticker.
Step 3 When prompted for your wireless security settings, enter the Wi-Fi Password
listed on the Wireless Security Sticker (Wi-Fi Password is case sensitive).
Step 4 Wait approximately 30 seconds for the connection to establish. Your Wi-Fi
enabled device will notify you when it is connected.
Step 5 You may connect up to 32 Wi-Fi enabled devices. Repeat steps 1 through 4.

The Wi-Fi Name (SSID) and Wi-Fi Password (WIFI KEY) are printed on the
Wireless Security Sticker located on the bottom of your B882 4G LTE Smart Hub.

To protect your wireless network from unauthorized access, change the Wi-Fi
Name (SSID) and Wi-Fi Password (WIFI KEY)
at regular intervals. For details, see
the online help information on the web user interface.
If you are using Windows Vista or later, you can press the WPS button on the top of
your Smart Hub for 6 seconds in lieu of entering the Wi
-Fi Password.

7

8
3Getting Started: Setting up your
Phone
Follow these simple steps to connect a Phone to your 4G LTE Smart Hub.
Step 1 For voice calls, connect a standard telephone to the Telephone Port using
a RJ-11 cable (you will require a voice plan in addition to a data plan
to use this feature).
Step 2 Check the indicators on the front panel of your Smart Hub. At minimum the
indicators must be lit as outlined.
You are ready to make your first phone call on your new Smart Hub! Refer to the
section “Using your 4G LTE Smart Hub’s Phone Features” for more help on using a
phone with your Smart Hub.
If the B8
82 4G
LTE Smart Hub is to be connected to the existing wall outlet telephone
wiring
, the existing wiring MUST first be disconnected from any outside landline
telephone network.
Not disconnecting from any outside landline telephone network
will cause excessive he
at or even damage the Smart Hub.

Radio signals can interfere with the telephone call connection and quality. To
eliminate the risk of possible interference, place the telephone at least 1 meter
away from the B882 4G LTE Smart Hub.

Fax is not support on this 4G LTE Smart Hub.

9
Power
Solid White: the Smart Hub is powered on.
Wireless Signal
indicator
Solid Blue or Cyan: the Smart Hub is registered
with the wireless network.
If this indicator is red and blinking, power off the
4G LTE Smart Hub and ensure your SIM card is
inserted correctly.
If this continues after turning the 4G LTE Smart
Hub on again, please contact TELUS at 1-866-
558-2273 to ensure your SIM card is activated.
Call status
indicator
Not lit
Solid white when you are on a call.
This indicator will blink when you are receiving a
call in addition to your phone ringing.

10
4Using Your 4G LTE Smart Hub’s
Phone Features
The 4G LTE Smart Hub offers the ability to make calls via your wireless service. Please
familiarize yourself with the Smart Hub’s calling features below. (Instructions may vary
depending on the telephone model and for cordless handsets)
Forwarding a Call
Forward All Incoming Calls
All your incoming calls will be forwarded to another number.
To activate:
Step 1 Dial *21* before the area code and number you want to forward your calls
to, e.g. *21*4161234567#.
Step 2 You will hear a tone that indicates call forwarding has been activated.
To deactivate it:
Dial #21#. When you hear a tone hang up, Call Forwarding has been cancelled.
Forwarding Calls when Busy
Only when you are on the phone and the line is busy, your incoming calls will get
forwarded.
To activate:
Step 1 Dial *67* before the area code and number you want to forward your calls
to, e.g. *67*4161234567#.
Step 2 You will hear a tone that indicates call forwarding has been activated.
To deactivate:
Dial #67#. When you hear a tone hang up, Call Forwarding has been cancelled.
Call Forward No Answer
Only if your phone rings and is not answered, your incoming calls will get forwarded.
To activate:
Step 1 Dial *61* before the area code and number you want to forward your calls
to, e.g. *61*4161234567#.
Step 2 You will hear a tone that indicates call forwarding has been activated.
To deactivate it:
Dial #61#. When you hear a tone hang up, Call Forwarding has been cancelled.

11
Making a conference call
You can conference a maximum of three people on the TELUS network. The first call
can be incoming or outgoing, but the second call must be initiated by you.
To make a conference call:
Step 1 During a call, ask the recipient to hold, then press the Flash/Talk key (varies
by telephone model).
Step 2 Dial the next number.
Step 3 When the call is answered, press the Flash/Talk key to connect both calls.
Your conference call is set up.
To disconnect one of the participants:
During the call, press the Flash/Talk key (varies by telephone model). The participant
who was last to join the call is disconnected.
To end the conference call:
Hang up or Press the End key to end the call. Your conference call ends.
Call Waiting
When another call comes in, Call Waiting alerts you with two fast beeps. You either
accept the second incoming call or let it to go straight to voice mail. Either way, you
never miss a call.
Call Waiting works with Call Display, so you can see who is calling before deciding to
interrupt your first call.
You can disable Call Waiting for those calls you don't want interrupted.
To activate Call Waiting:
Dial *43# and hang up after you hear a tone indicating Call Waiting has been
activated.
To Deactivate Call Waiting:
Dial #43# and hang up after you hear a tone indicating Call Waiting has been
deactivated.
To Accept a Call Waiting:
Press the Hang up/Hook down (varies by phone model) during the call.
To Alternate between Calls:
Press the Hang up/Hook down (varies by phone model) during the call.

12
Caller ID
Caller ID shows the phone numbers of your incoming calls so you have the flexibility
to choose whether to answer the call. When used with Call Waiting, you see
incoming phone numbers even if you are on another call.
Using outbound Caller ID, you can choose to block your number as "Restricted".
To Block your caller ID on an outbound call:
Dial #31# and hang up after you hear a tone.
To Unblock your caller ID on an outbound call:
Dial *31# and hang up after you hear a tone.
Checking your voice mail
You can check your voice mail from your telephone or another phone.
From your telephone:
Step 1 Dial your 4G LTE Smart Hub number. A message tells you if you have any
voice mail messages.
Step 2 If you have messages, follow the prompts.
From another phone:
Step 1 Dial your 4G LTE Smart Hub number. Your voice mail greeting plays.
Step 2 During your voice mail greeting, press the * key.
Step 3 Type your password and follow the prompts.

13
5First Time Quick Setup Wizard
The first time you go to the Web user interface site, you will be presented with the
opportunity to quickly setup your Smart Hub credentials via the Quick Setup Wizard.
After completing the Quick Setup Wizard, you can choose Settings > Quick Setup to
access this setup again.
Step 1 Launch a web browser, and enter http://huawei.smarthub or
http://192.168.20.1 in the address bar.
Step 2 Enter the website password, and log in to the web user interface. The
default password is printed on the Wireless Security Sticker located on the
bottom of the 4G LTE Smart Hub. You must choose a new password for the
web user interface to continue. Once your password has been changed, you
will be redirected to the Quick Setup Wizard page shown below.
Step 3 The default profile should have Connection Channel set to Wireless only
and Wireless 4G network selection set to Auto (recommended). Click
Next to continue.
Step 4 The Profile list should be set to TELUS ISP, and the Static APN should be
defaulted to isp.telus.com. Click Next to continue.

14
Step 5 Configure WLAN basic settings in the page.
SSID Name: The SSID is the name of your wireless network. Use a
unique name to identify your wireless network so that you can easily
connect from your wireless clients.
SSID Broadcast: Select Enable to broadcast the SSID of your 4G LTE
Smart Hub, or select Disable to hide. If the SSID Broadcast option is
disabled, other people will not be able scan and detect your 4G LTE
Smart Hub’s SSID.
Click Next to continue.
Step 6 Configure WLAN security settings.
Setting a strong wireless security level (such as WPA2-PSK – AES) can
prevent unauthorized access to your wireless network. Please enter the
Security Key that you wish to use, or leave this field unchanged to use the
default Security Key.
Click Next to continue.
Step 7 Review your settings then click Finish to save configuration.

15
6Changing your 4G LTE Smart Hub
Settings
You can configure and manage the 4G LTE Smart Hub settings using the web user
interface.
Step 1 Launch a web browser, and enter http://huawei.smarthub or
http://192.168.20.1 in the address bar.
Step 2 Enter the password, and log in to the web user interface. The default
password is printed on the Wireless Security Sticker located on the bottom
of the 4G LTE Smart Hub.

To protect your Smart Hub, only one user can log in to the web user interface at a
time.

To protect your account, change the password immediately. For details, see the
online help information on the web user interface.

16
7Getting to Know Your Smart Hub
Appearance
1
Power button
2Power port
3Telephone port
4LAN ports
5
WAN port
6Wi-Fi/WPS button
7Dial-up button
8SIM card slot
1Power indicator
2Network status indicator
3Wi-Fi/WPS indicator
4SMS indicator
5Call status indicator
6Wireless dialing indicator
7LAN indicators
8Ethernet dialing indicator

17
Indicators
The front panel of your B882 4G LTE Smart Hub provides simple and intuitive
indicators so that you can easily learn the B882 Smart Hub’s status by observing the
indicator lights.
Indicator Status
Power indicator
On: Smart Hub powered on.
Off: Smart Hub powered off.
Network status indicator
Fast red blinking: SIM card unavailable (SIM
card not installed or malfunctioning, or PIN
code not verified).
Steady blue: Smart Hub registered with 4G
network.
Steady cyan: Smart Hub registered with LTE
network.
Off: no signal received.
The B882 4G LTE Smart Hub provides Data and Voice
services on the TELUS 4G network and will not
support wireless services outside of TELUS coverage
area.
This indicator does not represent the actual wireless
signal strength of Smart Hub. Login to the Web User
Interface to view actual signal strength.
Wi-Fi/WPS indicator
Steady on: Wi-Fi turned on or data transfer in
progress.
Blinking: WPS connection being set up.
Off: Wi-Fi turned off.
SMS/Voicemail indicator
Steady on: inbox full.
Blinking: new messages.

18
Indicator Status
Telephone indicator
Steady on: call in progress.
Slow blinking: incoming call.
Wireless dialing indicator
Steady on: connected to a 4G/LTE network.
Slow blinking: connecting to a 4G/LTE network.
/ /
LAN indicators
Steady on: network cable connected.
Blinking: data transfer in progress.
Off: network cable not connected.
Ethernet (Wired Internet)
dialing indicator
Steady on: connected to an Ethernet network.
Slow blinking: connecting to an Ethernet
network.

19
8Restoring Factory Defaults
If you are uncertain of which settings you have configured or changed, you can
restore the factory default settings of the B882 4G LTE Smart Hub, and then
reconfigure.
To restore the factory defaults, use a sharp-pointed object to press and hold the
Reset button until the signal indicators on the B882 4G LTE Smart Hub blinks.
After the factory default settings are restored, the B882 4G LTE Smart Hub will restart
automatically.
Restoring factory defaults will delete all the
B882 Smart Hub's user-defined settings
and restore all settings on the web user interface to their defaults.