HUB6 alert User manual

Welcome to your safer,
smarter community.
Download the latest version from
www.userguide.hub6.app-alert

Know your
HUB6 alert is a personal panic button. Once triggered,
emergency contacts such as your authorized neighbours
and family members will be notified immediately.
Need to activate a new HUB6
Alert, run a test or reset WiFi?
This button will help.
Service button
Once pressed, your
emergency contacts will
be notified.
Alarm button

To activate your device, download
the HUB6 APP
9 41

Ecobee Thermostat
HUB6 Alert
Virtual Alarm
HUB6 Safe
Devices
9 41
Create your HUB6 account and
add your device.
Register with HUB6, then tap “Set up”. On the next
page, please choose “HUB6 Alert” to continue.
Email or phone number
Password
Forgot password?
Log in
Sign up
No account?
9 41
My Home
Everything about our
NEW home security services.
Safety
Premium
HUB6 Inc.
Is your house
winter ready?
HUB6 Inc.
16 hours ago
Feed +See all
Devices
Set up
No device connected
HUB6 can notify you alarm triggered at your home,
keep you informed about your home status and
more. Connect devices to enable morefunctions.
Neighbourhood More
9 41

Got a stable and secure WiFi?
Ok, let’s activate your now!
Select your home WiFi and enter the password. You HUB6
Alert will then connect to your selected WiFi network.
Add a Device
Jack Ma
Owner's name
safebyhub6
Passphrase
phone number
Phone number
Continue
Registered user will receive notifications
from the guard.
Contact 1
?
Continue
Connect to home WiFi
Make sure your phone is connected toa
secured stable WiFi. Your SAFE Button will
connect to the same WiFi automatically.
9 41
Continue
Connect to home WiFi
Is this the correct WiFi?
If not please go
to Settings to connect the desir
ed
WiFi and the following info will be updated.
Password
QWER1234
Add a Device
9 41

Setting up your device...
We are connecting your SAFE button.
This process could take up to 2 minutes.
Please make sure your phone is connected to
the internet and do not turn off
the screen or leave the app.
9 41
Add a Device
9 41
Continue
Activate your device
Push and hold the service button
(located on the left side) and the panic butt
on
until light blinking in red and blue.
Add a Device
9 41
Activate your and give it a
few minutes to connect.
Activation: push and hold both the service button and
panic button until a light starts blinking red and blue.

Continue
Name this device
Kitchen panic button
Device Name
Give your device a nickname.
Add a Device
9 41
Contacts
Assign your friends and family as your Contacts.
Your Contactswill receive your message once
HUB6 Alert is triggered.
Emergency Contacts
Invite
Save
Add a Device
9 41
Continue
Customize your device
Tell SAFE Button what to do in case of an
emergency.You may change your preference
anytime under “Device”.
By default, yourSAFE Button will beep once and flash
blue light when
your signal is successfully sent. You
can keep this setting or customize it.
Sound
Only beep
Only flash light
Beep and flash light
Write a message
When you press the SAFE button,a message will be
sent
to individuals and/or monitoring stations. You
may customize the content or leave it blank.
I have a heart condition. Please send medical
help
to 1 Joy Ave,TorontoASAP!
0/80
Add a Device
9 41
Tell bout yourself.
Customize your preference.
Customize feedback settings, alert messages,
emergency contact and device name.

Continue
You are all set.
Your SAFE Buttonis all set up and good to go.
Place the sticker on a desired plain and
secure your button.In case of emergency, push the
button to trigger the alarm.
1 2
3
Add a Device
9 41
Use sticker and Velcro to place
your at a desired location.
Place the sticker on a flat surface, and the Velcro will
hold in place.

Great! Your is all set!
Now let’s run a test.
Press the service button to test the connection. A blue
light indicates a good connection. If you see a red light,
please try to activate the device again or call our
customer support at [phone] for assistance.
Continue
Let’s do a testing!
Press the service button located on the side of
the unit. If properly connected,y
our HUB6 Alert
should flash blue light.
Red light indicates errors and you may need to
reinstall your HUB6 Alert.
Good connection
Test failed
You may need toreinstall this device
Add a Device
9 41

My HUB6 Alert
Normal
Preference
Remove This Device
Sound and Message
Access Group
Rename Device
Reset WiFi
History
Status
9 41
Call 911 Neighbour
Response
HUB6
Call
Disarm
Alarm
Front doorbell
Camera doorbell
Study Panic Button
Personal panic button
Alarm
SAFE by Hub6
Home security hub Armed Stay
Devices
Neighbourhood More
HUB6 Alert
My Home
9 41
Safety at the push of a button!
Our digital interactions will make
sure of it.
Edit your preferences with your HUB6 app. Take action
in case of an emergency. It's simple but effective.
Device page Alarm page

FCC Regulatory Compliance
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna
or transmitter.

IC Statements
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.

HUB6 Limited Warranty
Warranty Coverage
HUB6 Inc. (“HUB6”) warrants the enclosed product (“Product”) to
be free of all defects in material and workmanship for a period of
one (1) year from the date of shipment of Product by HUB6
(“Warranty Period”).
During the Warranty Period, HUB6 will repair or replace, at HUB6’s
own discretion, at no charge, the Product or parts of the Product
that prove defective because of improper material or workmanship
under normal use and maintenance.
Any Product that has been repaired or replaced under this Limited
Warranty assumes the remaining warranty of the original unit or
ninety (90) days from the date of shipment by HUB6 of the
repaired or replaced unit, whichever is longer.
Who is Covered
This limited warranty extends to the original buyer and each
successive buyer within the Warranty Period.
This equipment complies with IC RSS‐102 radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux radiations
IC CNR‐102 établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec une distance minimale de 20cm
entre le radiateur et votre corps.

What is Not Covered
This limited warranty does not cover any defects or damage
caused by the owner modifying, attempting to fix, or otherwise
altering the Product.
This limited warranty does not cover any non-HUB6-branded
hardware, specifically
including but not limited to any other hardware that the Product
may be or may have been, connected to.
This limited warranty does not cover any failure or damage caused
by loss or theft,
improper use, careless use or accidental damage to the Product.
This limited warranty does not cover failure or damage caused by
natural disasters or acts of terrorism.
This limited warranty does not cover water or fire damage to the
Product.
How to Obtain Services
To obtain the benefit of this limited warranty, the customer must
fill out a customer
support request form at hub6.io/support and follow the shipping
instructions for the Product given by HUB6 customer support
representatives.

HUB6 will, given the Product is deemed under warranty by HUB6,
repair the Product or replace the Product if HUB6 can’t repair it
within a reasonable amount of time.
In the case where HUB6 cannot repair or replace the Product, HUB6
reserves the right to issue a full refund to the customer for the
original purchase price paid for the Product.
Restrictions
This limited warranty is voided if the Product’s external hardware
case is opened by the customer. The warranty is voided in its
entirety, regardless of whether the customer did anything to the
internal components after opening the hardware case.

www.hub6.io
[phone]
[email protected]
Contact us