Hubble Nursery Pal Link Premium User manual

USER’S GUIDE
Nursery Pal Link Premium, Nursery Pal Link
Premium Twin
The features described in this user’s guide are subject to modifications without prior notice.
5" Smart Baby Monitor

Welcome...
to your new Hubble Smart Video Baby
Monitor!
Thank you for purchasing the Smart Video Baby Monitor. Now you can see
and hear your baby sleeping in another room or you can monitor your older
children in their play room. Our Connected Baby Monitor let you see your
baby from the hand-held viewer, or from your smartphone. Watch over and
communicate with your baby from anywhere in the world.
Please retain your original dated sales receipt for your records. For warranty
service of your Hubble product, you will need to provide a copy of your
dated sales receipt to confirm warranty status. Registration is not required
for warranty coverage.
For product related questions, please contact:
Live Chat: hubbleconnected.com
Email: [email protected]
https://hubbleconnected.com/warranty
https://hubbleconnected.com/apps/product-registration
Visit support.hubbleconnected.com to download the User Guide with
instructions, answers to frequently asked questions, and more to help you
get the most from your product.
Inside the Box
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 2 x Power adaptors (Parent Unit and Baby Unit)
• 1 x Quick Start Quide
In multi-camera packs, you will nd one or more additional Baby Units with
power adaptors.

Overview of the Parent Unit
2 43
8
10
9
5 6
11
12
13
7
16
17
18
15
14
1
1. Display (LCD screen)
2. Charging LED
RED when mains power
connected.
3. Parent Unit ON/OFF LED
(Green)
4. Sound Level indicators (Green,
Amber, Red, Red)
Show the sound level detected
by the Baby Unit - the louder of
sound detected, the more LEDs
light up.
5. Volume -
Press to decrease Volume level.
6. Volume +
Press to increase Volume level.
7. Display ON/OFF button
Press to turn the LCD screen
ON/OFF (Note: audio is
maintained.)
8. Microphone
9. MENU button
Press to open / close the Menu
options.
10. Navigation button + - < >
Move Up/Down/Right/Left menu
options.
11. OK button
12. TALK button T
Press and hold to speak to your
baby.
13. Power button 0
Press and Hold to turn the Parent
Unit ON/OFF.
14. Antenna
15. RESET pin hole (recessed - use
small pin)
16. Speaker
17. Power Socket
18. Stand

Parent Unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Video also changes to Black/White).
Talk Mode On.
Indicates the screen off timer is set.
Volume Level Control (8 Levels).
No Baby Unit detected.
Battery Level Indication (4 Levels).
Zoom Level Control (1X, 2X).
LCD Brightness Level Control (8 Levels).
Audio Playlist (10 lullabies, 8 audiobooks, Audio Recording and
Volume Control).
Alarm Setting (6h, 4h, 2h, OFF)
On status bar, indicates alarm set, and when ashing, that alarm time
has been reached or missed.
Temperature scale select (°C/°F)
Readings display in WHITE, but turn RED if > 29 °C / 84 °F or < 14 °C / 57 °F.
Displays HH °C / °F if >36 °C / 97 °F.
Displays LL °C / °F if < 1 °C / 34 °F.
Camera Control [ - (delete) / + (add) / (view) / (scan) ].
Set Screen Off Timer (Off , 5 mins, 15 mins, 30 mins).
View multiple cameras on screen. Available when you have more than 1
Baby Unit (Camera).
QR code page

Overview of Your Baby Unit
Important guidelines for installing your Digital Video Baby Monitor
• To use your Baby Unit and Parent Unit together, you must be able to establish
a radio link between them, and the range will be affected by environmental
conditions.
• Any large metal object, like a refrigerator, a mirror, a ling cabinet, a metallic
door or reinforced concrete, between the Baby Unit and Parent Unit may block
the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or
by radio or electrical equipment, such as TVs, computers, cordless or mobile
phones, uorescent lights or dimmer switches.
• Other 2.4GHz products, such as wireless networks (Wi-Fi® routers),
Bluetooth™ systems, microwave ovens or other Baby Monitors, may cause
interference with this product, so keep the Baby Monitor at least 5ft (1.5m)
away from these types of product, or switch them off if they appear to be
causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to different
positions in the rooms.
1. Light Sensor
2. Camera Lens
3. Infrared LEDs (x8, for night
vision)
4. Power/Link indicator
5. High Sensitivity Microphone
6. Antenna
7. Speaker
8. PAIR button
9. Power Socket
10. Temperature Sensor
1
2
5
4
3
8
9
10
7
6

6
Table of contents
Table of contents
1. Safety Instructions ............................................................................... 8
2. Getting Started ................................................................................... 11
2.1 Connecting the Power Supply for the Baby Unit.............................11
2.2 Connecting the Power Supply of the Parent Unit ...........................11
2.3 Desktop Stand of the Parent Unit ................................................... 12
2.4 Registration (Pairing)........................................................................ 13
3. Using the Baby Monitor ..................................................................... 14
3.1 Setting Up........................................................................................14
3.2 Night Vision Mode...........................................................................14
3.3 Talk Mode.........................................................................................14
3.4 Video ON/OFF.................................................................................14
3.5 Temperature Display (HH °C / °F or LL °C / °F) ...............................14
4. Parent Unit Menu Options ................................................................ 15
4.1 Volume .............................................................................................15
4.2 Brightness ........................................................................................15
4.3 Zoom................................................................................................15
4.4 Audio Playlist ...................................................................................15
4.4.1 Lullaby/Soothing Sounds Playback ....................................... 15
4.4.2 Audio Book (English only) Playback......................................16
4.4.3 Personal Recording Playback................................................16
4.4.4 Volume Level of Audio Playback...........................................16
4.5 Alarm................................................................................................16
4.6 Temperature.....................................................................................17
4.7 Camera Control................................................................................17

7
English
Table of contents
4.7.1 Add (pair) a camera...............................................................17
4.7.2 View a camera .......................................................................17
4.7.3 Delete a camera....................................................................18
4.7.4 Scan camera .......................................................................... 18
4.8 Power Saving mode ......................................................................... 19
4.9 View multiple cameras on screen ....................................................19
5. Wi-Fi® Internet Viewing ..................................................................... 20
5.1 Minimum System Requirements ......................................................20
5.2 Getting started - Connecting Devices ............................................. 20
5.3 Setup................................................................................................21
5.4 User Account and Camera Setup on Android™ Devices or iPhone®/
iPad® ...............................................................................................21
5.4.1 Power ON and Connect the Camera....................................21
5.4.2 Download HubbleClub by Hubble Connected App............. 21
5.4.3 Sign up with Hubble on your smart device...........................22
5.4.4 Add the Camera to your account ........................................23
6. Disposal of the Device (environment) ............................................ 26
7. Cleaning ................................................................................................. 26
8. Help.......................................................................................................... 27
9. General Information ........................................................................... 34
10.Technical Specifications .................................................................... 38

8Safety Instructions
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED on cords. Keep this cord
out of the reach of children (more than
3ft (1m) away). Never use extension
cords with AC Adaptors. Only use the
AC Adaptors provided.

9
Safety Instructions
English
BABY UNIT SETUP & USE:
• Choose a location for the Baby Unit that will provide the best view of
your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf,
or mount the Baby Unit with Hubble Grip (Not Included).
• NEVER place the Baby Unit or cords within the crib.
Warning:
This Baby Monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as de-scribed in the User’s
Guide, safe to use. Therefore, always read the instructions in this User’s
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User’s Guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor in damp areas or close to water.
• Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or
close to a heat source.

10 Safety Instructions
• Only use the chargers and power adaptors provided. Do not use other
chargers or power adaptors as this may damage the device and battery
pack.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adaptors to easily accessible electrical sockets.
Caution:
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions. Use only the
rechargeable battery pack with rating: 3.8V 2100mAh.

11
Getting Started
English
2. Getting Started
2.1 Connecting the Power Supply for the Baby Unit
• Insert the DC plug of the power
adaptor into the DC socket on the
back of the Baby Unit.
• Connect the other end of the power
adaptor to a suitable electrical outlet.
• The baby unit turns on and the power
indicator lights in green color.
Note:
Only use the supplied power adaptor
(DC5V/1000mA).
2.2 Connecting the Power Supply of the Parent Unit
A rechargeable battery (Lithium ion battery 2100mAh) inside the Parent Unit
allows portability to the parent unit. The battery provides up to 4 hours
operation of the Parent Unit. We recommend charging the for at least 4 hours
before rst use, and when the Parent Unit indicates the battery is low.
• Connect the small plug of the power adaptor to the parent unit and the other
end to the electrical outlet. Only use the included adaptor (5VDC/1000mA).
• Press and hold the 0button to turn the Parent unit on, the Parent unit and
Baby unit are automatically linked and ready to use.

12 Getting Started
Note:
When the Baby and Parent Units are both turned on and within range, the Parent
Unit should show a color image from the Baby Unit camera, but if the room is
dark, the image will be in black and white, with an icon showing the Baby Unit
is in Night Vision mode.
2.3 Desktop Stand of the Parent Unit
• The parent unit comes with a desktop stand attached to the back of the
parent unit.
• To place the parent unit on a desk, simply pull out the stand, as shown.
Note:
Place the parent unit on a at, even surface.

13
Getting Started
English
2.4 Registration (Pairing)
The Baby Unit is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the +UP button or - DOWN button to select + (add), and press
the button to conrm.
4. Camera 1/ 2/ 3/ 4will pop up. Press the +UP button or - DOWN
button to select the desired Camera, and press the button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * beside it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Baby Unit until
the Parent Unit nds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.

14 Using the Baby Monitor
3. Using the Baby Monitor
3.1 Setting Up
Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor. Adjust the angle of the Baby
Unit's camera until you are satised with the image shown on the Parent Unit.
Note:
Do not place the Baby Unit within the baby’s reach! If there is interference
with the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2 Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images
in the dark. When the built-in Light sensor on the top of the Unit detects
a low level of ambient light, the LEDs will automatically activate and the
screen on the Parent Unit will display in black and white. The icon will be
displayed at the top of the screen.
3.3 Talk Mode
Press and hold the TALK button Ton the Parent Unit to talk to your baby
through the Baby Unit’s speaker.
The Ticon will be displayed at the top of the LCD screen.
3.4 Video ON/OFF
Press Display On/Off button to turn the LCD screen on or off. Audio will
remain active.
3.5 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the
Baby Unit will be displayed at the top of the LCD screen. The readings will
turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F.
The reading will change to HH °C / °F if the temperature goes above 36°C /
97°F. The reading will change to LL °C / °F if the temperature goes below 1°C
/ 34°F.

15
Parent Unit Menu Options
English
4. Parent Unit Menu Options
4.1 Volume
Press the + or - button to adjust the volume level.
The icon will pop up and you can select the desired volume from level
0~8. (The default volume level setting is level 4, and level 0 is OFF .)
4.2 Brightness
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted.
3. Press the +UP button or - DOWN button to select the desired
brightness from level 1 ~ 8. (The default brightness is level 4.)
4.3 Zoom
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted
3. Press the +UP button or - DOWN button to select 1X to 2X zoom.
4.4 Audio Playlist
You can playback audio content - Lullabies, Soothing Sounds and Audio
Book (English only) on the Baby Unit. The audio content can be downloaded
and stored in the Baby Unit via Hubble App. You have 10 preloaded
lullabies/soothing sounds and 10 audio books in the Baby Unit.
4.4.1 Lullaby/Soothing Sounds Playback
1. Press the button then Scroll Left/Right to select option at the menu
bar.
2. Scroll + Up or - Down to select , and press the button to conrm.
3. Press +UP button or -DOWN button to view the desired Lullaby/
Soothing Sounds. The song names appear on the screen.
4. Press the button to play the selection.

16 Parent Unit Menu Options
4.4.2 Audio Book (English only) Playback
1. Press the button then Scroll Left/Right to select option at the menu
bar.
2. Scroll + Up or - Down to select , and press the button to conrm.
3. Press +UP button or -DOWN button to view the desired Audio Book.
The book titles appear on the screen.
4. Press the button to play the selection.
4.4.3 Personal Recording Playback
The unit allows playback your personal audio to soothe your baby, before
playback, please record a personal audio via HubbleClub by Hubble
Connected App.
1. Press the button then Scroll Left/Right to select option at the menu
bar.
2. Scroll + Up or - Down to select >, and press the button to conrm.
3. Press +UP button or -DOWN button to view the desired personal
recording.
4. Press the button to play the selection to soothe your baby.
4.4.4 Volume Level of Audio Playback
1. Press the button then Scroll Left/Right to select option at the menu
bar.
2. Scroll + Up or - Down to select , and press the button to conrm.
3. Press +UP button or -DOWN button to select the volume level of
audio playback.
4.5 Alarm
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted.
3. Press the +UP button or -DOWN button to select alarm off after 2
hours, 4 hours or 6 hours.

17
Parent Unit Menu Options
English
4.6 Temperature
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted.
3. Press + UP / - DOWN to select °C or °F.
4.7 Camera Control
4.7.1 Add (pair) a camera
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the +UP button or - DOWN button to select + (add), and press
the button to conrm.
4. Camera 1/ 2/ 3/ 4will pop up. Press the +UP button or - DOWN
button to select the desired Camera, and press the button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * beside it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Baby Unit until
the Parent Unit nds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
4.7.2 View a camera
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the +UP button or - DOWN button to select (view), and
press the button to conrm.
4. Camera 1/ 2/ 3/ 4will pop up, press the +UP button or - DOWN
button to select the desired Camera, and press the button to view the
picture from that camera.

18 Parent Unit Menu Options
Note:
Only camera locations with a * can be selected.
TIP
You can also press the button repeatedly to select the avail-able camera
options from 1/ 2/ 3/ 4, (scan).
4.7.3 Delete a camera
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the +UP button or - DOWN button to select - (delete), and
press the button to conrm.
4. Camera 1/ 2/ 3/ 4will pop up, press the +UP button or - DOWN
button to select the desired Camera, and press the button.
5. Press the +UP button or -DOWN button to select
, then press the
button to delete that camera.
Note:
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.7.4 Scan camera
This function is only available when you have more than 1 Baby Unit
(Camera).
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted, and
the - (delete) / + (add) / (view) / (scan) menu will pop up.
3. Press the +UP button or - DOWN button to select (scan), and
press the button to conrm.
4. The screen will then display images from different registered cameras in
a loop of Camera 1/ 2/ 3/ 4, changing about every 12 seconds.
TIP
You can also press the button repeatedly to select the avail-able camera
options from 1/ 2/ 3/ 4
,
(scan).

19
Parent Unit Menu Options
English
4.8 Power Saving mode
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until Vis highlighted.
3. Press the +UP button or -DOWN button to select auto video off after
5 mins, 15 mins or 30 mins (if operating on batteries only).
Note:
The audio will remain and you can press any key to switch the video back on.
4.9 View multiple cameras on screen
This function is only available when you have more than 1 Baby Unit
(Camera). When the Split Screen function is On, you can view multiple
cameras on the screen.
1. Press the button and the menu bar will pop up.
2. Press the <LEFT button or >RIGHT button until is highlighted.
3. Press+ UP button or - DOWN button to select Split Screen On /
Off .
4. When the Split Screen function is On, you can press the <LEFT button
/ >RIGHT button / +UP button / -DOWN button to switch between
cameras to hear the audio from the selected camera.

20 Wi-Fi® Internet Viewing
5. Wi-Fi® Internet Viewing
5.1 Minimum System Requirements
Android™ System
• Version 8.0 or above
iPhone®/iPad® iOS
• Version 12.0 or above
High Speed (Wi-Fi®) Internet
• At least 0.6 Mbps upload bandwidth per camera (you can test your
internet speed on this site: http://www.speedtest.net)
5.2 Getting started - Connecting Devices
How does it work?
Access your
Camera locally
View your Camera from any
compatible device remotely
Wi-Fi RouterWi-Fi®
Camera
Hubble
Service
When a user tries to access the Camera, our Hubble server authenticates
the user’s identity and permits access to the Camera.