Huber+suhner 74 z-0-12-18 User manual

Document: DOC-0000736636 / Date of publication: 04.04.2016 / uncontrolled copy page 1/2

nstruction

Quick

Fit plus

reparing

tool 74_Z

for

½” annular cables

Safety Instructions

Insertion / Replacement of Blade Unit

Required Tools

1x screwdriver

Verify change position

Make sure that the preparing tool is in the

START/END position. If not, then keep the grip fix

and rotate the base tool clockwise or counter-

clockwise until the START/END position is

reached.

Separate base tool / grip section

Release the lock-mechanism (latch) at the

preparing tool carefully by using a screw-driver

and remove the base tool part at once.

Document: DOC-0000736636 / Date of publication: 04.04.2016 / uncontrolled copy page 2/2

nstruction

Quick

Fit plus

reparing

tool 74_Z

for

½” annular cables

Access blade unit position

This position provides easy access to the blade

unit section for inspection, maintenance and

replacement purposes.

Remove blade unit

Raise carefully the blade unit by means of a

fitting screw-driver. Remove the blade unit.

Blades are fully accessible.

Insert blade unit

Insert / re-insert / replace the required blade unit

carefully in the correct position.

Blades are fully accessible.

Check position of blade unit

Make sure that the blade unit is properly inserted

again and in the final stop position.

Assemble base tool

Join the base tool part with the grip part in the

correct position. If required, turn the base tool

part a little in radial direction until the axial

position allows the compete joining.

Lock base tool

Make sure that the base tool part reached the

final position and the lock-mechanism (latch) is

locked properly. Check by means of a slight

counter-movement.

For assembly instruction with full product range, please visit –

www.hubersuhner.com/QuickFitPlus

HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS 16949 und IRIS www.hubersuhner.com

Waiver: It is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any

particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only.

Table of contents

Other HUBER+SUHNER Cables And Connectors manuals