HUBITOOLS HU23100 User manual

HU23100 Inspection Camera
Quick Guide
Product Outlook
Getting Started
Connecting Insert Tube Hold the handgrip to start inspection
785 mm
The creaking sound
is normal while
bending the metal
neck

Specification
Dimension
Caution
Working T emper atur e -10ºC~60ºC
Storage Temper atur e -10ºC~60ºC
Weight 490g
Avoid sharp object, drop, or collision on camera head.
Keep away from the areas with high voltage while using this product.
Make sure inspection object is powered o to avoid short circuit.
This product is designed for industrial use only. Do not use for human or any other biological inspection.
Keep the system away from dangerous environment such as gasoline/fuel tank or alcohol.
Always store the product in a dry, cool and well-ventilated place and avoid direct exposure to sunlight.
To clean this product, use dry, clean cloth to wipe, do not use any organic solvent.
Please keep the probe in dry condition, while in use or stored. In case of getting wet, plesae use dry cloth to wipe out
and don't leave the probe air dry.
DO NOT try to disassemble the product, it might cause electrical shock and damage the unit. We will not provide warranty
service on self-disassemble units.
L: 785mm (w/o cable), 1035mm (with cable), W: 51mm, H : 54mm