Huion INSPIROY RTP-700 User manual

RTP-700
Contents
Product Overview ...................................................... 2
Tablet Introduction .................................................... 2
Product and Accessories ................................................ 3
Product Connection .................................................... 4
Driver and Setting ..................................................... 6
Install Driver ........................................................ 6
Driver Interface Preview ................................................. 7
Pen Tablet Setting ..................................................... 9
Digital Pen Setting .................................................... 16
Driver Setting ....................................................... 22
Digital Pen Basic Operation .............................................. 26
Specifications ........................................................ 30
Troubleshooting Solutions .............................................. 31
1 / 32

RTP-700
Product Overview
Tablet Introduction
Thanks for choosing HUION INSPIROY RTP-700 creative pen tablet. This is a
new generation of professional battery-free drawing tablet, which can greatly
improve your work efficiency of painting and creation, and full of fun. You can
freely painting and writing, depicting different lines and colors, just as the pen
writes on the paper, which brings you a real shock experience.
To give you a better understanding and using of your tablet, please read this
user manual carefully. The user manual only shows the information under
Windows, unless otherwise specified, this information applies to both
Windows and Mac systems.
Note: The pictures in the User Manual are for reference only.
2 / 32

RTP-700
Product and Accessories
Please see the detailed product introduction.
After unboxing your package, make sure that you have the following items:
Tablet*1
Battery-free Pen*1
Pen Holder*1
Replacement Nibs*10
USB Cable*1
Quick Start Guide*1
3 / 32

RTP-700
Product Connection
1. Wired Connection
Connect the tablet to your computer with USB cable. Please follow the steps below:
1. Take out the USB cable from the package, then connect tablet to your computer.
2. Please download the Pen Driver from our website:Driver-RTP-700.
3. Open the driver interface, the device picture will be displayed on the interface, indicating
that the tablet is successfully connected to the computer.You can start use the tablet.
4 / 32

RTP-700
2. Android connection
Please follow the steps below:
1. Please make sure your phone & pad OS is as following: Android OS 6.0 or
later.
2. For some models, you need to go phone or pad "Settings" then enable
"OTG" function.
3. Choose OTG Adapter from package,then connect pen tablet to your phone
following the illustrations below:
5 / 32

RTP-700
Driver and Setting
Install Driver
Please download the driver from our website: Driver-RTP-700
Note:
1. Before installing driver, please close all graphic software and antivirus program.
2. If you have installed other pen tablet driver, please uninstall it before you install this driver.
3. Please make sure your computer OS are as following: Windows 7 or later, macOS 10.12 or
later,ChromeOS 88 or later.
4. Run the tablet driver program and complete the installation according to the instruction.
After the download is successful, double-click to open the driver, Connect the device to your
computer.
If the connection fails, please reconnect the computer to the device, or restart the driver or
computer.
6 / 32

RTP-700
7 / 32

RTP-700
Driver Interface Preview
1. Pen Tablet
Pen Tablet function setting interface, the users can set the tablet function on this interface.
See Section
2. Digital Pen
The users can set the Pen function on this interface. About Press Key, Mode selection,
Pressure Sensitivity Adjustment and Pressure Test.
See Section
3. Store
Huion Store, where you can get the latest information about the product such as its FAQ or
sales promotion. Additionally, you can also purchase other products or accessories on Huion
8 / 32

RTP-700
Store.
4. Add Programs
You can customize different functions on the current device for different programs.
When select All programs, the setting of the device is valid for every program.
By clicking Add a Program from the drop-down list, you can set the functions for a specific
program and hence have unique settings for different programs. After that, when launching a
specific program, the Driver will automatically recognize it and the setting features will change
to its corresponding one.
5. Setting
The users can set the Driver function on this interface. About Device Information, Backup
Setting, General Setting and Driver Update.
See Section
6. Switch between Devices
Driver can support the connection to two digital drawing devices at the same time. When
these devices are sharing the same Driver with the current device, users can customize the
settings of the devices by switching the Driver interface to the corresponding one.
Pen Tablet Setting
Press Key
You can customize the functions of these buttons according to your own habits, and you can
uncheck "Enable press keys" in the lower left corner to turn off the button function.
Place the cursor on a key to check its default value. Click the key for a pop-up dialog box and
then set the function.
You can enter a name for the keystroke, then select the property of the keystroke and
customize the function.
9 / 32

RTP-700
1. Keyboard Key
Click on the input box above and enter a valid key combination to creat a shortcut. For
example "Ctrl+A", "Ctrl+Z", and so on.
10 / 32