Huion KAMVAS 13 User manual

Kamvas 13
Contents
Product Overview .................................................. 2
Display Introduction ................................................. 2
Product and Accessories .............................................. 2
Product Connection ................................................ 5
Driver and Setting ................................................. 7
Install Driver ....................................................... 7
Driver Interface Preview .............................................. 9
Pen Display Setting ................................................. 11
Driver Setting ..................................................... 19
Digital Pen Setting .................................................. 24
Digital Pen Basic Operation ........................................ 29
Specifications ..................................................... 33
Troubleshooting Solutions ......................................... 35
1 / 38

Kamvas 13
Product Overview
Display Introduction
Thanks for choosing HUION KAMVAS 13 creative pen display. This is a new generation of
professional drawing display, which can greatly improve your work efficiency of painting and
creation, and full of fun. You can freely painting and writing, depicting different lines and colors,
just as the pen writes on the paper, which brings you a real shock experience.
To give you a better understanding and using of your tablet, please read this user manual
carefully. The user manual only shows the information under Windows, unless otherwise
specified, this information applies to both Windows and Mac systems.
Note: The pictures in the User Manual are for reference only.
Product and Accessories
Product Overview
Please see the detailed product introduction.
2 / 38

Kamvas 13
*Function Button: Press K4 & K5 around three seconds to open the OSD menu, meanwhile the
indicator will flash green. The function of K2 K3 K6 K7 will become OSD function.
K2 [AUTO]: Before entering menu, its function is "auto adjustment".
After entering menu, its function is "back to previous menu".
K3 [MENU]: Press to call up the menu, after entering menu, its function is "confirm".
K7 [ - ]: After entering menu, its function is "down/left/decrease".
K6 [ + ]: After entering menu, its function is "up/right/increase".
*Press K4 & K5 again for around three seconds until the OSD menu disappears, the function of
K2 K3 K6 K7 will become shortcuts function again.
3 / 38

Kamvas 13
Accessories
After unboxing your package, make sure that you have the following items:
Pen Display*1
Battery-free Pen*1
Pen Holder*1
Replacement Nibs(Inside the Pen Holder)*8
3-in-1 Cable*1
USB Extension Cable*1
Quick Start Guide*1
Cleaning Cloth*1
Warranty Card*1
*3-in-1 Cable
1. USB(Data) 2. HDMI 3. USB(Power) 4. Type-C
4 / 38

Kamvas 13
*Adjustable Stand(Optional)
We designed this ergonomic adjustable stand specially for your KAMVAS display, you can
adjust the angle of the display according to your usage habit, and make you feel more
comfortable when painting and creating.
Product Connection
5 / 38

Kamvas 13
The display supports the connection of a computer and Android device, please refer to the
following connection method.
Watch the Video
3-in-1 Type-C Cable
Connect the pen display to your computer with 3-in-1 Cable.
Generally the device can be powered on when the black USB-A cable is connected to your
computer. A flashing screen of the device may indicate a low battery, in which case you are
suggested to connect the red colored USB-A cable to another USB interface on your computer or
the power adaptor. The power adaptor is not included in the package and requires extra cost.
Power adaptor of your mobile phone is also compatible.
USB-C to USB-C Cable(Optional)
Connect the display to your computer or Android device with USB-C to USB-C cable:
USB-C to USB-C cable is not included in the package and requires extra cost. You can buy it in
the Store.
6 / 38

Kamvas 13
Kamvas 13 is the first pen display that supports connectivity with Android device via a USB-C to
USB-C cable.
*USB-C on device should at least support USB3.1 GEN1 data transfer protocol and DP 1.2.
*Extra power supply is needed under connection with Android device.
Learn More
Driver and Setting
Install Driver
7 / 38

Kamvas 13
Please download the driver from our website: Driver-Kamvas 13
Note:
1. Before installing driver, please close all graphic software and antivirus program.
2. If you have installed other pen tablet driver, please uninstall it before you install this driver.
3. Please make sure your computer OS are as following: Windows 7 or later, macOS 10.12 or
later.
4. Run the tablet driver program and complete the installation according to the instruction.
After the download is successful, double-click to open the driver.
If the connection fails, please reconnect the computer to the device, or restart the driver or
computer.
8 / 38

Kamvas 13
Driver Interface Preview
9 / 38

Kamvas 13
1. Pen Tablet
Pen Tablet function setting interface, the users can set the device function on this interface, such
as Press Key, Working Area.
See Section
2. Digital Pen
The users can set the Pen function on this interface. About Press Key, Mode selection, Pressure
Sensitivity Adjustment and Pressure Test.
See Section
3. Store
Huion Store, where you can get the latest information about the product such as its FAQ or sales
promotion. Additionally, you can also purchase other products or accessories on Huion Store.
10 / 38

Kamvas 13
4. Add Programs
You can customize different functions on the current device for different programs.
When select All programs, the setting of the device is valid for every program.
By clicking Add a Program from the drop-down list, you can set the functions for a specific
program and hence have unique settings for different programs. After that, when launching a
specific program, the Driver will automatically recognize it and the setting features will change to
its corresponding one.
5. Setting
The users can set the Driver function on this interface. About Device Information, Backup
Setting, General Setting and Driver Update.
See Section
6. Switch between Devices
Driver can support the connection to two digital drawing devices at the same time. When these
devices are sharing the same Driver with the current device, users can customize the settings of
the devices by switching the Driver interface to the corresponding one.
Pen Display Setting
Press Key
You can customize the functions of these buttons according to your own habits, and you can
uncheck "Enable press keys" in the lower left corner to turn off the button function.
Place the cursor on a key to check its default value. Click the key for a pop-up dialog box and
then set the function.
You can enter a name for the keystroke, then select the property of the keystroke and customize
11 / 38

Kamvas 13
the function.
1. Keyboard Key
Click on the input box above and enter a valid key combination to creat a shortcut. For example
"Ctrl+A", "Ctrl+Z", and so on.
12 / 38

Kamvas 13
2. Mouse Key
Select the function of a Mouse or Wheel. Please see the picture below for detailed functions.
Mouse: Left Button, Right Button, Middle Button.
Wheel: Wheel Forward, Wheel Backward.
Double-Left Click.
13 / 38

Kamvas 13
3. Switch
Select Switch Screen or Switch Brush.
Note: Some software does not support the "Switch Brush" function.
4. Run Program
Browse and select a program that you want to launch quickly. After the setting, you can launch
that program with just a single press.
14 / 38

Kamvas 13
5. System Application
The table below are the functions of Windows and Mac Systems that can be customized on the
Keys.
6. Multimedia
15 / 38

Kamvas 13
To realize the functions such as previous song, next song, play/pause, volume up, volume down.
7. None
When select None, the keys will have no function.
Working Area
Select the Working Area tab to define the relationship between pen movement on the device and
cursor movement on the monitor screen.
By default the entire active area of device maps to the entire monitor. If more than one monitor is
in use and you are in extended mode, you need to choose the related monitor on the driver
interface which you are going to map to.
If your monitors are in mirror mode (All monitors display the same content), the device maps to
the entire space on each monitor and the screen cursor is displayed on each monitor
simultaneously.
1. Working Area Setting
Define the device area that will be mapped to the screen area.
[1] Full Area: the entire active area of the device. This is the default setting.
16 / 38

Kamvas 13
[2] Screen Ratio: As a general rule, be 16:9.
[3] Customized Area:
1> Enter coordinate values.
2> Drag the corners of the foreground graphic to select the screen area.
2. Rotate Working Area
By changing the direction of the device to adapt to the left and right hand operation. You can
rotate the tablet by 0°, 90°, 180° or 270°.
17 / 38

Kamvas 13
3. Monitor Calibration
Click "Cursor Calibration" to enter the calibration page and operate according to the prompts.
18 / 38

Kamvas 13
Please use the digital pen to click on the center red dot of the cross in a common pen-holding
posture. You can cancel Calibration and restore default.
19 / 38

Kamvas 13
Driver Setting
1. Device
You can view product information.
*OSD Settings
Scene Mode: You can choose the "Standard Mode", "Motion Mode", "Movie Mode" and
"Gaming Mode".
Brightness: You can djust the brightness of the screen.
Contrast Ratio: You can adjust the contrast of the screen.
Color Temperature: You can choose "6500K", "9500K", and "USER" mode. In the "USER"
mode, you can customize the color temperature by adjusting the RGB value.
20 / 38