HULALA HOME CHAF0341 User manual

NOTE:
ITEM NO. CHAF0341
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No to
customerser[email protected]om
For return, please check the return policy with
the retailer or market place you bought from.
Appreciate your purchasing from us.
Pop up your life by our furniture piece!

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
Weight Limitation
220LBS
PARTS
LIST

HARDWARE
LIST
ASSEMBLY
INSTRUCTIONS
SPARE
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
STEP 1:Place side frame E on clean padded surface.
Insert wood dowel #2 and fasten bolt #1 into holes
on side frame E, align the dowel hole and insert the
bolt #1 through end of front/back rail F, then use half
moon washer #4, nut #3 and open wrench #5 to
connect front/back rail, make sure side frame
connected properly with rails then fasten all nuts to
secure.

STEP 2:Repeat the first step to install the other side
frame.
STEP 3:Turn the chair frame upright. Place the seat
cushion B on top of the front/back rail F, use bolt
#XX to connect seat cushion and front/back rail,
fasten to secure.

STEP 4:Turn the chair frame upside down, use
mending plate 7 screw 6 and Philips head screwdriver
8 to connect seat cushion B and front/back rail F,
fasten all screws to secure.
STEP 5:Carefully align male and female metal bracket
then insert backrest A in between side frames, push
all the way down to secure.

STEP 6:Place the armrest pad C on top of side frame E,
carefully match the velcro belt on armrest pad and side frame,
press to secure.
STEP 7:Place the back cushion D on front of backrest.

STEP 8:Assembly completed.