HULALA HOME BCYJ0741 User manual

HULALA
H O M E
01/26
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future
reference.
ITEM NO.BCYJ0741

MAINTAINANCE AND WARNING
1.Keep furniture away from heat sources.
2.Do not clean furniture with harsh cleaner or polishes.Do not use
detergents,solvents,abrasives,spray packs or leather cleaner.
Use non-color mild soa with warm water to clean spills(Mix 1:10
soap to water).
3.Do not place furniture under direct sunlight,material will possibly
fade over time.
4.Do not use on site dry cleaning machine.Children should not climb
or jump on the furniture.
5.Do not write on furniture that is not protectedby a padded barrier.
6.Not for commercial use,only for residential use.
Weight Limitation
100 LBS
02/26

EXPLOSIVE VIEW
2PERSONENS
03/26
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A11
A11
A13
A14
A15
A12

PARTS LIST 1
x1
x1
x1
x1
x1x1
x1
x1
x3
04/26
x1
x1x1
x1x1
A1 A2 A3 A4
A5 A6 A7 A8
A9 A10 A11 A12
A14 A15
x1
A13

05/26
HARDWARE LIST
TOOL LIST
x20
B1 x24
Ø3*15MM
B2 x4
B5
x4
Ø4*38MM
B3 B4 x3
x24
B7 x17 B8 x4 B10 x2 B11 x4 B12 x12 B9
B17 B18
x1 x1
M6
x2
B13
HARDWARE SPARE LIST
x4
B6
Ø3*15MM Ø4*39MM
1/4"*15MM
5/32"*16MM
x4
B14 x4 B15 x2 B16
1/4"*32MM
Ø4*20MM
x1
B1 x1
Ø3*15MM
B2
Ø3*15MM
x1
B7 x1 B8
1/4"*15MM 1/4"*32MM

06/26
ASSEMBLY INSTRUCTIONS
STEP-1
A1
A2
A4
B17 x1
M6
B17
A4
A2
B17
A4
A1
1.Insert side panel (A1＆A2) into bottom panel
(A4),make sure all holes aligned and then tighten it with
allen key B17as picture show.

ASSEMBLY INSTRUCTIONS
STEP-2
07/26
A3
B18 x1x4
B1
Ø3*15MM
x2
B13
B18
B13x2
B1x4
1.Use screw B1 to attach magnetic catch B13 to the
corresponding hole of panel(A3), tighten screw with
screwdriver B18.

ASSEMBLY INSTRUCTIONS
STEP-3
08/26
A1
A2
A3
B17 x1
M6
B17
B17
A2
A3
A1
A3
1.Insert panel (A3) into side panel (A1&A2),make sure
all holes aligned and then tighten it with allen key B17 as
picture show.

ASSEMBLY INSTRUCTIONS
STEP-4
09/26
OPEN
A4
A2
A3
A1
A5
A5
A5
B18 x1
x16
B1
Ø3*15MM
B18
B1x16
A5
1.Open the back panel (A5),insert back panel(A5) into the
groove of preassembled step 3,make sure all holes
aligned and use screw B1 to attach them ，tighten screw
#2 with screwdrive B18.

10/26
ASSEMBLY INSTRUCTIONS
STEP-5
A8
A9
A10
A11
A11
A11 B17 x1
M6
x9
B8
1/4"*32MM
B17
B8x9
A8& A9 &A10
install part （A8&A9&A10） on of part A11, ensure the
corresponding holes are aligned and fix with screw B8,
then tighten the screw with an Allen key B17.