HULALA HOME SCTY0594 User manual

HULALA
H O M E
01/21
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future
reference.
ITEM NO.SCTY0594

MAINTAINANCE AND WARNING
1.Keep furniture away from heat sources.
2.Do not clean furniture with harsh cleaner or polishes.Do not use
detergents,solvents,abrasives,spray packs or leather cleaner.
Use non-color mild soa with warm water to clean spills(Mix 1:10
soap to water).
3.Do not place furniture under direct sunlight,material will possibly
fade over time.
4.Do not use on site dry cleaning machine.Children should not climb
or jump on the furniture.
5.Do not write on furniture that is not protectedby a padded barrier.
6.Not for commercial use,only for residential use.
Weight Limitation
120 LBS
02/21

EXPLOSIVE VIEW
2PERSONENS
03/21
A1
A2
A3
A4
A5
A6
A7
A7
A7
A7
A8
A9
A10
A10
A10
A10

PARTS LIST 1
x1
x1 x1x1x1
04/21
x1
x4x1
x1x4
A1 A2 A3 A4
A5 A6 A7 A8
A9 A10

05/21
HARDWARE LIST
TOOL LIST
x20
B1 B2 x26 x16 B5 x16 B6
x4 B10 x4 B11 x4 B12 x4
B9
B14 B15
x1 x1
1/4"
x2
B13
HARDWARE SPARE LIST
1/4"*3/4" 1/4"*16MM
Ø3*15MM
Ø4*20MM Ø4*39MM
x24
B3
Ø3*15MM
x2
B4
x2
B7 x4 B8
x2
B1 B2 x2 x2 B5 x1 B6
1/4"*3/4" 1/4"*16MM
Ø3*15MM
x2
B3
Ø3*15MM

06/21
ASSEMBLY INSTRUCTIONS
STEP-1
A1
B15
x2
B4B2 x4
Ø3*15MM
B15 x1
B4
B2x4
1.Use screw B2 to attach magnetic catch （B4） to the
corresponding hole of panel(A1), tighten screw with screwdriver B15.

ASSEMBLY INSTRUCTIONS
STEP-2
07/21
B14 x1
1/4"
B14
A4
A3
A1
A4
A1
A3
A1
B14
1.Insert part (A4&A3) into part (A1),make sure all holes aligned and
then tighten it with allen key B14 as picture show.

ASSEMBLY INSTRUCTIONS
STEP-3
08/21
A1
A5
B14 B14 x1
1/4"
A1
A5
1.Insert part (A5) into part (A1),make sure all holes aligned and then
tighten it with allen key B14 as picture show.

ASSEMBLY INSTRUCTIONS
STEP-4
09/21
B14 x1
1/4"
A2
A4
A3
A5
B14
A5
A2
A2
A3
B14
A4
A2
B14
1.Insert bottom panel (A2) into the
corresponding hole of preassembled step 3
，make sure all holes aligned and use allen
key B14 to tighten it as picture show.

10/21
ASSEMBLY INSTRUCTIONS
STEP-5
B14 x1
1/4"
x16
B1
1/4"*3/4"
x16
B5
1/4"*16MM
A2
A7
A7
A7
A7
B14
B5x16
B1x16
A2
A7
1.Insert gasket B5 into screw B1. install leg A7 on of bottom panel
A2, then tighten the screw with an Allen key B14.