HULALA HOME SBLS0867 User manual

HULALA
H O M E
01/32
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future
reference.
ITEM NO.SBLS0867

MAINTAINANCE AND WARNING
1.Keep furniture away from heat sources.
2.Do not clean furniture with harsh cleaner or polishes.Do not use
detergents,solvents,abrasives,spray packs or leather cleaner.
Use non-color mild soap with warm water to clean spills(Mix 1:10
soap to water).
3.Do not place furniture under direct sunlight,material will possibly
fade over time.
4.Do not use on site dry cleaning machine.Children should not climb
or jump on the furniture.
5.Do not write on furniture that is not protectedby a padded barrier.
6.Not for commercial use,only for residential use.
Weight Limitation
150 LBS
02/32

EXPLOSIVE VIEW
2PERSONEN
03/32
A
C
D
E
H
H
F
I
I
B
JK
J
K
NN
N
N
L
L
M
M
F
G
G

PARTS LIST
A B CDx1
E F GHx2
I J K L x2
x1
x2
x2
x1
x2
x2
x1
x1
x2
04/32
M N x4x4

HARDWARE LIST
HARDWARE SPARE LIST
#1 x4
M6*10
#2 x4
M6*20
#3 #4 #5 #6
x8 x8 x1 x2
#7 #8 #9 #10 #11 #12
TOOL LIST
#13 #14 #15 #16 #17
#19 #20x1 x1
x8 x20 x14 x16 x14 x10
x2 x2 x14 x8 x8
M8*50
M6
M8
05/32
M3*14
#8 x3
M3*14
#18 x1
#3 x1
M8*50
#4 x1 #5 x1 #9 x1 #10 x1

#11 x1 #12 x1 #15 #16 #17x1 x1 x1
HARDWARE SPARE LIST
06/32

ASSEMBLY INSTRUCTIONS
STEP-1
#9 x10 #10 x6
07/32
#7 x4
#18 x1
A
#18
#9
#10
#7
#18
#7
#7
Prepare for part A. Align the holes in part A, insert wooden dowel
#10 by hand, tighten with screwdriver #18 tighten #9。
Use bolt #7 to attach Magnetic device #7 to top panel (A) ，tighten
bolts with screwdriver #18.
#9
#9
#9
#9
#9
#9
#9
#10
#10
#10
#9
#10
#10

ASSEMBLY INSTRUCTIONS
STEP-2
#15 x6
Ø8x30mm
#11 x6
Ø1/4x1"
#18 x1
08/32
A
D&E&C
AA
D & E&CD&E&C
A
D
EC
#18
#11
#15
Connect the part A with part C&D&E. align the hole in the part
C&D&E ,insert the bolt #9 and wooden dowel #10 in part A into part
C&D&E. insert cam bolt #15 into the corresponding hole of side
panel C&D&E,and tighten the nuts #15 with a screwdriver #18. After
installation, cover the screw holes with #11. Make sure the groove is
in same side as picture show.
#11
#11
#11

ASSEMBLY INSTRUCTIONS
STEP-3
#8 x12
Ø1/4x1"
#18 x1
09/32
#14 x2
A
C
E
D
A
E
#18
#8
#14
#14 #8 #8
Use screw #8 to attach the wine glass holder #14 to top panel
(A)，tighten screws #8 with screwdriver #18.

ASSEMBLY INSTRUCTIONS
STEP-4
#15 x10
Ø8x30mm
#11 x10
Ø1/4x1"
#18 x1
10/32
C
EH
H
D
A
HHH
A
A
A
#18 #11
#15
#15
#11
Connect the part A with part H. align the hole in the part H,insert the
bolt #9 in part A into part H. insert cam bolt #15 into the
corresponding hole of side panel H ,and tighten the nuts #15 with a
screwdriver #18. After installation, cover the screw holes with #11.
Make sure the groove is in same side as picture show.

ASSEMBLY INSTRUCTIONS
#10 x6
11/32
A
D
E
C
H
H
GFF
G
#10
#10
#10
#10
Manually insert #10 wooden dowels (C&D&E), slide in the part F into
the groove in part D,H and H,E and E,H and H,C . make sure they are
also in groove in part A.

ASSEMBLY INSTRUCTIONS
#9 x4
Ø1/4x1"
#18 x1
12/32
STEP-6
#7 x4
B
B
B
#7
#7
#7
#7
#18
#9
#9
#18
#7
#9
#9
#9 #9
Align the holes in part (B) tighten with screwdriver #18 tighten #9.
picture shows.Use bolt #7 to attach Magnetic device
#7 to bottom panel (B) ，tighten bolts with screwdriver #18.

ASSEMBLY INSTRUCTIONS
STEP-7
#12 x6
Ø1/4x1"
#20 x1
13/32
A
D
C
E
GHF
FHG
BB
#12
#12
#12
#12
#12
#12
#20
#12
Connect the part B the pre-assembled unit in step 5.
Then align the holes in part B,Insert screw #12 and push it down so
that it connects to parts C&D&E&H. Next,and tighten the screw #12
with an Allen key #20.
M6

NN
BB
#3
#16
#17
#19
#3
#17 #16
A
D
C
E
GHF
FHG
B
ASSEMBLY INSTRUCTIONS
#16 x8
Ø8x30mm
#17 x8
Ø1/4x1"
#19 x1
14/32
STEP-8
#3 x8
Ø8x30mm
1.Insert gasket #16 and #17 in sequence into screw #3, install leg (N)
on of bottom panel (B), ensure the corresponding holes are aligned
and fix with screw #3, then tighten the screw with an Allen key #19.
M8
N
N
N
N

#15 x4
Ø8x30mm
#18 x1
Ø1/4x1"
#11 x4
15/32
#15
#18
#11
insert cam bolt #15 into the corresponding hole of side panel
H ,and tighten the nuts #15 with a screwdriver #18. After
installation, cover the screw holes with #11. Make sure the
groove is in same side as picture show.
ASSEMBLY INSTRUCTIONS
STEP-9
H
H
H
#15
#15
#11
#11
#15
#15
#11
#11 F
F
H
H

ASSEMBLY INSTRUCTIONS
#5 x1 #18 x1
16/32
STEP-10
#5
#5 #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#18
A
H
H
G
F
F
G
Insert hardware #5 into part (F&G) as shown, screw in screw #5
using screwdriver #18 and tighten fully.
F
F

ASSEMBLY INSTRUCTIONS
17/32
STEP-11
Attention:
After installation, adjust the
adjustable leveler to keep
the cabinet balanced .

ASSEMBLY INSTRUCTIONS
#10 x4
Ø8x30mm
#12 x4
Ø1/4x1"
#18 x1
18/32
STEP-12
#12
#12
#12
#12
#12
#10
#18
#10
#10
#10
#10
M
M
L
L
Align the holes of the part L with the holes of the part M , insert
wooden dowel #10 by hand and insert the screw #12, and tighten
the screw #12 with the allen key #18.

ASSEMBLY INSTRUCTIONS
19/32
STEP-13
1.Place the wine glass holder in the cabinet.
M
L
C
E
D

ASSEMBLY INSTRUCTIONS
#4 x8
20/32
STEP-14
1.Insert shelf holder #4 into the corresponding hole of panel
(C)&(D)&(E) and then attach panel (I) to it.
Shelf holder can be
adjusted up or down
#4x8
#4
#4
#4
#4
#4
#4 I
I
D
E
C