HULALA HOME DCHJ0492 User manual

NOTE:
ITEM NO. DCHJ0492
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No to
customerser[email protected]m
For return, please check the return policy with
the retailer or market place you bought from.
Appreciate your purchasing from us.
Pop up your life by our furniture piece!

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
Weight Limitation
220LBS
PARTS
LIST
Front legs Chairback
Metal bar Seat

HARDWARE
LIST
ASSEMBLY
INSTRUCTIONS
SPARE
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
STEP 1:Attach 2*Metal bar C & Front legs A to the
Chairback B, using 8*screws E. Tighten screws with
the Allen key F to 80%.

STEP 2:Place the Chair Back B on clean padded
surface. Attach Seat D to the Chairback B & Front legs
A ,using 2*screws H,2*screws G,4*spring washers
J,4*flat washers I. Tighten screws loosely with the
Allen key K . And then tighten all screws to 100%.
STEP 3:Assembly completed
Attention: Adjust levelers under
leg to keep the chair balanced.