HULALA HOME SBYL0959 User manual

HULALA
H O M E
01/28
NOTE:
This brochure contains IMPORTANT safty info. Please read and keep for future
reference.
ITEM NO.SBYL0959

MAINTAINANCE AND WARNING
1.Keep furniture away from heat sources.
2.Do not clean furniture with harsh cleaner or polishes.Do not use
detergents,solvents,abrasives,spray packs or leather cleaner.
Use non-color mild soa with warm water to clean spills(Mix 1:10
soap to water).
3.Do not place furniture under direct sunlight,material will possibly
fade over time.
4.Do not use on site dry cleaning machine.Children should not climb
or jump on the furniture.
5.Do not write on furniture that is not protectedby a padded barrier.
6.Not for commercial use,only for residential use.
Weight Limitation
150 LBS
02/28

EXPLOSIVE VIEW
2PERSONENS
03/28
A1
A2
A3
A4
A5
A6
A7
A8
A9
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A21
A22
A22
A23
A23
A24
A24
A25
A25
L
R

PARTS LIST 1
x1
x1
x1
x1x1
x1
x1
x1
04/28
x1
x1x2
x1x1
A1 A2 A3 A4
A5 A6 A7 A8
A9 A10 A11 A12
A14
x1
A13 x1 A15 x1 A16

PARTS LIST 1
x2
x1 x1x1x1
05/28
x2 x2
A17 A18 A19 A20
A21 A22 A23 x2 A24
x2
A25
L&R

06/28
HARDWARE LIST
TOOL LIST
x48
B1 x38
B2 x4
B5
x28
B3 B4 x12
x2
B7 x1 B8 x12 B10 x4 B11 x4 B12 x4 B9
B17 B18
x1 x1
1/4"
x4
B13
HARDWARE SPARE LIST
x4
B6
Ø3*15MM Ø3*15MM Ø4*25MM 5/32"*3/4"
x4
B14 x4 B15 x2 B16
Ø4*20MM Ø4*39MM
x3
B1
Ø3*15MM
x3
B2
Ø3*15MM
x1
B9 x1 B3
Ø4*25MM
B4 x1
5/32"*3/4"

07/28
ASSEMBLY INSTRUCTIONS
STEP-1
A4
A5
A7
A7
B18 x1x2
B7 x1 B8
x6
B2
Ø3*15MM
B18
B8
B2x2
B2x4
B18
B7x2
1.Use screw B2 to attach magnetic catch （B7&B8） to the
corresponding hole of panel(A7), tighten screw with screwdriver B18.
2.Insert part (A7) into part (A4&A5),as picture show.

ASSEMBLY INSTRUCTIONS
STEP-2
08/28
A2
A3
A7
B17 x1
1/4"
B17
B17
A7
A3
A7
A2
1.Insert side panel (A3&A2) into the corresponding hole of
preassembled step 1，make sure all holes aligned and use allen key
B17 to tighten it as picture show.

ASSEMBLY INSTRUCTIONS
STEP-3
09/28
B17 x1
1/4"
A2
A3
A4
A5
A6
B17
B17
A6
A3 &A5
A6
A2 &A4
1.Insert bottom panel (A6) into the corresponding hole of
preassembled step 2，make sure all holes aligned and use allen key
B17 to tighten it as picture show.

ASSEMBLY INSTRUCTIONS
STEP-4
10/28
B17 x1
1/4"
B17
B17
A1
A2
A4
A5
A3
A1
A2 &
A4
A3
& A5
A1
1.Insert top panel(A1) into the corresponding hole of preassembled
step 3.make sure all holes aligned and use allen key#17 to tighten it
as picture show.

11/28
ASSEMBLY INSTRUCTIONS
STEP-5
OPEN
B18 x1x32
B2
Ø3*15MM
A8
A8
A2
A3
B18
B2x32
1.insert back panel(A8) into the groove of preassembled step 4,make
sure all holes aligned and use screw#B2 to attach them ，tighten
screw #B2 with screwdriverB18.

ASSEMBLY INSTRUCTIONS
STEP-6
12/28
Attention:
Before the next step, adjust the
feet of the locker to keep it
level.

ASSEMBLY INSTRUCTIONS
STEP-7
13/28
B18 x1x6
B3
Ø4*25MM
B18
B3x6
A15
A16
A20
A17
A18
A15
A16
A17
1.Connect part (A15&A16&A20) to part A17 using screw B3 and
tighten it with screwdriver B18 .
2.Slide in the part (A18) into the groove in part (A15&A16). make
sure they are also in groove in part A17.

ASSEMBLY INSTRUCTIONS
STEP-8
14/28
B18 x1x6
B3
Ø4*25MM
B10 x2
B4 x2
5/32"*3/4"
B18
B3x6
A19
A15
A16
A20
A19
B18
B4x2
B10x2
1.Connect part (A15&A16&A20) to part A19 using screw B3 and
tighten it with screwdriver B18.
2.Use bolt B4 to attach handle B10 to the corresponding hole of
panel(A19), tighten screw with screwdriver B18.

15/28
ASSEMBLY INSTRUCTIONS
STEP-9
x2
x2
B18 x1x8
B3
Ø4*25MM
B18
B3x4
A22
A23
A21
A22
A23
A21
A24
1.Connect part (A22&A23) to part A21 using screw B3 and tighten it
with screwdriver B18 .
2.Slide in the part (A24) into the groove in part (A22&A23). make sure
they are also in groove in part A21.

16/28
ASSEMBLY INSTRUCTIONS
x2
x2
B18 x1x8
B3
Ø4*25MM
B18
B10 x2
B4 x2
5/32"*3/4"
B3x4
A22
A23
A25
B18
B4
B10
STEP-10
1.Connect part (A22&A23) to part (A25 R&L)using screw B3 and
tighten it with screwdriver B18.
2.Use bolt B4 to attach handle B10 to the corresponding hole of
panel(A25 R&L), tighten screw with screwdriver B18.
L&R
A25
L&R

ASSEMBLY INSTRUCTIONS
STEP-11
17/28
Female slider
Male slider
Schematic diagram of
slide rail disassembly
Attention：When installing the
drawer,slide the steel ball slide rail
of side panel to the most front as
picture show.
A25
L
A25
R

ASSEMBLY INSTRUCTIONS
STEP-12
18/28
Shelf holder can be
adjusted up or down
x12
B9
A9
A9
A10
A2
A4
A5
A3
B9x12
1.Insert shelf holder B9 into the corresponding hole of panel
(A2)&(A4)&(A5)&(A3) and then attach panel (A9&A10) to it.

ASSEMBLY INSTRUCTIONS
STEP-13
19/28
B18 x1x4
B5
x8
B1
Ø3*15MM
B18
B1x8
B5x4
A11
A14
When installing hinge，please
pay attention to distinguish the
category of hinge!!!!!
1.Use screw B1 to attach hingeB5 to the corresponding hole of
panel(A11&A14), tighten screw with screwdriver B18.

ASSEMBLY INSTRUCTIONS
STEP-14
20/28
B18 x1x16
B1
Ø3*15MM
B18 B1x16
A11
A14
A2
A3
B5
1.Move door (A11) to corresponding position of side panel (A2)，make
sure all holes aligned and use screw B1 to attach them,tighten screwB1
with screwdriverB18.
2.Move door (A14) to corresponding position of side panel (A3)，make
sure all holes aligned and use screw B1 to attach them,tighten
screwB1 with screwdriverB18.