HULALA HOME NSBSD0370 User manual

NOTE:
ITEM NO. NSBSD0370
This brochure contains IMPORTANT safty info. Please read and keep for
future reference.
1/16

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers
or polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
Weight Limitation
80LBS
2/16

PARTS
LIST
3/16

Explosive View
4/16

HARDWARE
LIST
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
5/16
SPARE

6/16
ASSEMBLY
INSTRUCTIONS
Place top panel #1 upside
down on clean padded
surface ,Insert wood dowel D
and use philips head
screwdriver to fasten,cambolt A
on bottom of the top #1.
Place end panel #3/#4 on clean
padded surface, Use philips
head screwdriver to fasten
cambolt A and use screw E to
attach female drawer slides H
through predrilled pilot holes on
inside of end panel #3/#4.

7/16
Insert cam bolt A end panel #3/#4 through end holes
of rail #5, use philips head screwdriver to fasten cam
nut B in order to secure both end panels #3/#4 with
rail #5.
Insert cam bolt A on top #1
through end holes of end panel
#3/#4, use Philips head
screwdriver to fasten cam nut B
in order to secure both end
panels #3/#4 with top #1, use
sticker N to cover the cam nut.
Then insert wood dowel D to
end holes of end panel #3/#4.

8/16
Insert back panel #6 through
rear groove on end panel #3/
#4 and top panle #1 , make
sure the bake panel set all
the way through to groove
under top.
Use allen key O/ bolt C to
connect bottom panel #2 with
end panel #3/#4, make sure
edge of bottom panel align
with end panels then fasten
all bolts to secue. Use philips
head screwdrver to fasten
cam bolt A to bottom of
bottom panel #2.

9/16
Use philips head screwdriver to
fasten cam bolt A to holes on
edge of front/back rail #7,Insert
cam bolt on front/back rail #7
through end hole of side rails
#8,fasten cam nut B to secure
the bottom frame.
Insert cam bolt on bottom panel #2
through bottom holes of bottom
frame assembly, use philips head
screwdriver to fasten cam nut
B in order to secure the whole
frame on bottom parel. Make sure
edges of bottom frame tree of dust
then past floor pad p on place.

10/16
Insert plastic bracket to
gap between back panel
and the surrouding
grooves then use philips
head screwdriver to fasten
screw E tosecure the back
panel in place.
Use philips head screwdriver to fasten cam bolt A on
backside of drawer front #9 then use philips head
screw driver to attach handle on front side of drawer
front #9.