HULALA HOME CHM0354 User manual

WARRANTY
We ctrive to offer high-quality products,and we also try our best to
satisfy each and every customer that orders from us with product or
service as needed.We provide 30 days warranty starting from the time
you receive the item,Each customer must provide a record of their order
such as the order number,or item receipt for any items that are out of
the warranty period you may also still receive replacement parts by
purchasing them with our company if they are available.
HULALA
H O M E
ITEM NO. CHM0354&CHM0355
https://hulalahome.com/
NOTE:
This brochure contains IMPORTANT safty info.Please read and keep for
future reference.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No
[e-mail]
For return, Please check the return policy with
the retailer or MarketPlace you bought from.
Appreciated your purchasing from us.
Pop up your life by our furniture piece!

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or polish.Do
not use detergents,Solvents,abrasives,spray packs or
leather cleaner. Use non-color mild soap with warm
water clean spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,material will
possibly fade over time.
Do not use on site dry Cleaning machine
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to
protect the surface.
To obtain the longest lifespan of your outdoor products
avoid exposure to rain or snow,and direct sunshine for
long time.Whenever possible cover the product and/or
place under patio or awnings.
Not for commercial use,For residential use only.
Weight Limitation
LB
250LBS
5-10 MINUTES
PARTS
LIST
12(Lx1 Rx1)
12
Estimated Duration Of Assembly
RL

HARDWARE
LIST
6
M6*40mm
2
M6*20mm
4
SPARE
1
M6*40mm
1
M6*20mm
Be sure to check all packing material carefully for small
parts, which may have come loose inside the carton
during shipment.
ASSEMBLY
INSTRUCTIONS
(B-R) (B-L)
(D)
(D)
Hx1
1
(F)
(F)
( C)
STEP1:Insert D parts into the connectors of leg frame,
make sure they are pushed to the end and secure.
STEP 2:Align the hole of leg to the screw hole in the C parts.
Screw in with hardware F by Allen key H ,
then fully tighten after check all screws are in

nail (G) and fully tighten.
Zip it up and stick on Velcro
(E)
(A)
(G)
STEP4:
STEP3:Place the chair seat (A) on clean
and no-marring surface,
Align the hole of leg frame to the screw
hole of the chair seat, screw in with hardware E by Allen
key(H) and fully tighten.STEP5:Turn over the chair , check the balance.
adjusting nail to keep balance if worbbing.
Attention:Agjust levelers under
leg to keep the chair balanced..
Find the screw hole on the frame as
Picture Show, screw in the adjusting
please be sure you align the hole first
Attention: Do not fully tighten the bolts until all the bolts align with the holes;