Human Touch ThermoStretch HT-7120 User manual

ThermoStretch®HT-7120
Remote Control User Guide
WIDTH — Focus or diffuse massage
pressure by selecting the wide,
standard, or narrow roller setting.
Select the width setting AFTER
selecting a massage technique.
15-MINUTE AUTO PROGRAMS
— Choose from three auto massage
programs, focusing on either the full,
upper, or lower back.
FOOT & CALF — Choose from auto
massage, which alternates speeds,
or select a high or low speed.
SESSION TIMER — Indicates the
number of minutes remaining in the
current 15-minute program.
FRONT
STRETCH —Press the stretch button for
up to 15 seconds to activate (the remote
beeps when ready). The chair performs a
gentle full-body stretch.
RESTORE — Press to bring
the chair back into the upright
starting position.
FIVE MASSAGE TECHNIQUES —
Each massage technique button
toggles among auto (alternates
speeds), high and low speeds.
POWER — Lights to indicate that
master power switch is on.
STOP/PARK — Stops the massage and
parks the massage rollers at the top of
the backrest.
RANGE — Press the range
button to set the vertical
massage range to the short,
medium, or tall setting.
RECLINE — Adjusts the backrest angle

ThermoStretch®HT-7120
Remote Control User Guide
HEAT — Use heat to soothe
the lower lumbar area.
ZONE — Targets your
massage to a six-inch zone.
MASSAGE COMFORT — Press and
hold to increase or decrease massage
intensity and firm up or soften the
backrest cushion.
MASSAGE/COMFORT NUMBER —
Choose from 7 settings of fine-tune
massage intensity and contour.
For more detailed operation instructions,
please see the Use and Care Manual.
SIDE
POSITION (up/down arrows) — Use these
buttons along with any stationary massage
technique to set the massage rollers to the
desired position on the backrest.