Humanscale M/Connect 2 Installation instructions

Initial Disassembly
Step 1
Remove Stem Screw
Step 2
Remove Dock by pulling off from Hub
Step 3
Remove Cable Retainer Screw to detach cable
Tools Required
Safety Glasses Flat Screwdriver Standard Hex Key Set
Phillips Screwdriver
Disassembly InstructionsM/Connect 2
REV-00
Some components may not be recyclable in your area.
1
2
3
Steel
Aluminum
ABS
>ABS<

Hub and Clamp Disassembly
Tools Required
Safety Glasses Flat Screwdriver Standard Hex Key Set
Phillips Screwdriver
Step 1
Remove 4 Screws to detach from Slim Clamp and pull apart and set Hub aside
Step 2
Remove L-Bracket Cover
Step 3
Remove all screws, clips and washers to completely disassemble
Disassembly InstructionsM/Connect 2
REV-00
Some components may not be recyclable in your area.
1
2
3
ABS
>ABS<
Steel
Steel
Steel
Steel

Hub Disassembly Continued
Remove all screws and covers to completely disassemble
Note: Foam pad can be removed from bottom by scraping off.
Tools Required
Safety Glasses Flat Screwdriver Standard Hex Key Set
Phillips Screwdriver
Disassembly InstructionsM/Connect 2
REV-00
Some components may not be recyclable in your area.
Aluminum
FR4
ABS
>ABS<
ABS
>ABS<
Steel
Steel

Dock Disassembly
Tools Required
Safety Glasses Flat Screwdriver Standard Hex Key Set
Phillips Screwdriver
Disassembly InstructionsM/Connect 2
REV-00
Some components may not be recyclable in your area.
Step 1
Remove Sheetmetal Bracket Security Screw and slide out dock
Step 2
Remove all screws to disassemble unit
Step 3
Step 4
Remove PCBA
K-Lock Plate is head staked to bottom cover
1
2
3
4
ABS
>ABS<
Steel
FR4