HumbleCrew Seine ET8586 User manual

www.humblecrew.com(844) 509-4888
END TABLE
Model: ET8586
Collection: Seine
Made in Malaysia
Product info
Cleaning
Wipe with a damp cloth and mild soap
Dry with soft, lint free cloth

Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
1
2
PART LIST
TOP PANEL MINI FIX
4
SIDE PANEL (L)
6
SIDE PANEL (R)
7
8
QTY
3
5
HARDWARE
A
B
C
D
E
F
G
4 SETS
ALLEN KEY M4 1 PC
BOTTOM PANEL
DRAWER FRONT
BACK PANEL
H
M6 X 5OMM
CSK CAP WOOD SCREW
A1 A2 A3
M8 X 30MM WOOD DOWEL 8 PCS
9
10 CABINET LEG
DRAWER BOTTOM
14" DRAWER SLIDE H1 ( L/R )
H2 ( L/R )
MODEL : DAWN-NIGHT STANDASSEMBLY INSTRUCTIONS PAGE: /5
1
1 SETS
4 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
4 PCS
M3.5 X 16MM C.B SCREW
M4 X 38MM C.B SCREW 8 PCS
32 PCS
DRAWER SIDE
DRAWER BACK
2 PCS
1 PC
1 PC
SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
1
2
3
4
5
6
78
9
7
SUPPORT LEG IRON LF-3039 4 PCS
G
10
10
G
G
10
ET8586
www.humblecrew.com(844) 509-4888
DR8593
ET8586
PAGE: 1
If a part is missing or damaged, call our toll-free customer service number (844-509-4888) for help. We can ship you a replacement part free of charge.
Before you begin assembly place item on a clean, flat surface such as a carpet or rug to prevent scratches.
Before you begin, please make sure all parts are included. Read instructions carefully.
If a part is missing or damaged, call our toll-free customer service number (844-509-4888) for help. We can ship you a replacement part free of charge.
Before you begin assembly place item on a clean, flat surface such as a carpet or rug to prevent scratches.
Before you begin, please make sure all parts are included. Read instructions carefully.
Tools Needed: Tools below are NOT included
SCREWDRIVER HAMMER
Reminder:
Please ensure that all surfaces and edges with colors/laminations are facing forward/outward.

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 2
STEP 1
1
Insert hardware A2 onto panel (1) .
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
A2
x4
ROTATE
STEP 2
- Insert hardware A1 onto panel (3) .
(Repeat 2 times.)
- Insert hardware B onto panel (3).
(Repeat 4 times.)
* Ensure the arrows on hardware A1 point towards mounting
3
x4
PRESS
B
PRESS
A1
x2
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 3
STEP 3
- Insert hardware A1 onto panel (4) .
(Repeat 2 times.)
- Insert hardware B onto panel (4) .
(Repeat 4 times.)
* Ensure the arrows on hardware A1 point towards mounting positions.
4
x4
PRESS
B
PRESS
A1
x2
STEP 4
Fix hardware H1 (L) into panel (3) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
Second hole
from the edge.
x1
ROTATE
E
Big hole at
the center.
x1
ROTATE
E
Second hole
from the edge.
x1
ROTATE
E
3
H1(L)
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 4
STEP 5
Fix hardware H1 (R) into panel (4) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x1
ROTATE
Second hole
from the edge.
E
x1
ROTATE
Big hole at
the center.
E
x1
ROTATE
Second hole
from the edge.
E
4
H1(R)
STEP 6
- Attach panel (1) to panel (3) and (4).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 4 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and Bare pre-inserted.
1
3
4
ROTATE
Section View
x4
A2
A1
x4 PRESS
A3
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 5
STEP 7
Insert the panel (5) along the slot.
(Repeat 1 times.)
1
3
4
5
STEP 8
Connect panel (2) to panel (3) and (4)
by using hardware C and D.
(Repeat 4 times.)
* In this step hardware Bare pre-inserted.
HARDWARE
D
ROTATE
x4
C
D
23
4
5
1
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 6
STEP 9
SCREWDRIVER
REQUIRED
Fix hardware Ginto panel (2) by using hardware E .
(Repeat 5 times for each hardware.)
1
2
3
4
5
x20
G
E
ROTATE
STEP 10
Assemble part 10 into hardware G.
(Repeat 4 times.)
x4
10
GROTATE
1
2
3
4
5
10
10
10
10
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 7
STEP 11
Assemble panel (7) to panel (6) and (8) by using hardware F.
(Repeat 4 times.)
6
7
8
x4
F
ROTATE
STEP 12
Insert the panel (9) along the slot.
(Repeat 1 times.)
6
7
8
9
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 8
STEP 13
Assemble panel (7) to panel (6) and (8) by using hardware F.
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
ROTATE
F
x4
6
7
8
9
7
STEP 14
Assemble hardware H2 (L/R) to panel (7) by using hardware E.
(Repeat 3 times for each hardware.)
*Hardware H2 (L/R) shall be leaning against panel (6) when assembling.
SCREWDRIVER
REQUIRED
Third hole
from the edge.
x2
E
ROTATE
Hole at
the center.
x2
E
ROTATE
Third hole
from the edge.
x2
E
ROTATE
6
7
8
9
H2
(L)
H2
(R)
7
www.humblecrew.com(844) 509-4888

MODEL : ET8586
ASSEMBLY INSTRUCTIONS
PAGE: 9
STEP 15
Put all the drawer in place along the drawer slides.
1
4
6
3
2
10
10
10
10
www.humblecrew.com(844) 509-4888