Hunter X-CORE Operating instructions

XCORE

EN Residential Irrigation Controller
Owner’s Manual and Programming Instructions
DE Bewässerungssteuerung
Bedienungs- und Montageanleitung
ES Programador de riego residencial
Manual del usuario e instrucciones de instalación
FR Programmateurs X-Core pour Arrosage
Manuel de l’utilisateur et instructions de programmation
du programmateur
IT Programmatorie X-Core
Manuale dell’utente ed istruzioni per la programmazione
PT Programador para Instalações de Rega Residencial
Manual do Utilizador e Instruções de Programação
TR Konutsal Sulama Kontrol Ünitesi
Kurulum, Programlama ve Kullanım Kılavuzu
SEASONAL ADJUSTMENT WATER DAYS
START TIMES
SYSTEM OFF CURRENT TIME/DAY
RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
MANUAL-ONE STATION

2
EN
SEASONAL ADJUSTMENT
WATER DAYS
START TIMES
SYSTEM OFF
CURRENT TIME/DAY
RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
MANUAL SINGLE STATION

3
EN
XCORE COMPONENTS ...................................................................4
MOUNTING THE CONTROLLER TO WALL........................................8
CONNECTING VALVES AND TRANSFORMER ..................................9
ACTIVATING THE BATTERY........................................................... 10
REPLACING THE BATTERY............................................................ 10
CONNECTING A MASTER VALVE .................................................... 11
CONNECTING A PUMP START RELAY.............................................12
CONNECTING A HUNTER “CLIK” WEATHER SENSOR ....................13
Testing the Weather Sensor ........................................................13
Manually Bypassing the Weather Sensor ....................................13
CONNECTING A HUNTER SOLAR SYNC ET SENSOR.................. 14
Installing Solar Sync Sensor ....................................................... 14
Installing the Wireless Solar Sync............................................. 14
Solar Sync Settings .................................................................... 14
Region

..................................................................................15
Water Adjustment

.................................................................16
Uninstalling a Solar Sync Sensor ................................................ 14
Calibration/Setup .......................................................................17
Solar Sync Delay Feature.............................................................18
CONNECTING A HUNTER REMOTE.................................................19
Connecting to a Hunter Remote (not included)...........................19
To install the SmartPort connector..............................................19
POWER FAILURES ......................................................................19
PROGRAMMING THE CONTROLLER.............................................20
Setting the Date and Time .....................................................21
Setting the Program Start Time(s) .........................................21
Eliminating a Program Start Time ...............................................21
Setting Station Run Times ......................................................21
Setting Days To Water ...........................................................21
Selecting Specic Days of the Week to Water .............................21
Selecting Odd or Even Days to Water .........................................22
Selecting Interval Watering .................................................22
Setting Event Day(s) O.............................................................22
Automatic Watering ...............................................................22
System O ...........................................................................22
Programmable Rain O..............................................................23
Seasonal Adjustment ............................................................23
Manually Run a Single Station 1.............................................23
One-Touch Manual Start and Advance .......................................24
ADVANCED FEATURES .............................................................. 25
Programmable Sensor Override................................................. 25
Test Program of All Stations.......................................................25
Hunter Quick Check Diagnostics...............................................25
Easy Retrieve™ Program Memory..............................................26
Programmable Delay Between Stations.....................................26
Resetting Controller / Clearing Controllers Memory ..................26
Clik Delay Instructions................................................................ 27
Program Customization .............................................................28
Cycle and Soak ...........................................................................29
TROUBLESHOOTING GUIDE ..........................................................30
SPECIFICATIONS ........................................................................... 33
Operating Specications ............................................................33
Electrical Specications.............................................................. 33
Explanation of Symbols..............................................................33
CERTIFICATE OF CONFORMITY TO EUROPEAN DIRECTIVES ...34
TABLE OF CONTENTS

EN
XCORE COMPONENTS
4
LCD Display
1Run Times Allows user to set each valve station run time from 1 minute to 4 hours
2Start Times Allows 1 to 4 start times to be set in each program
3 Station Number Indicates currently selected station number
4 Program Designator Identies program (A, B, or C) in use
5 Day of the Week Identies day of the week
6 Interval Watering Identies month when programming current date
7 Odd/Even Watering Identies if Odd or Even watering has been selected
8 Flashing Sprinkler Indicates that watering is taking place
9System O Allows user to discontinue all programs and watering. Also allows the user to set the programmable
“rain o,” which stops watering for a period from 1 to 7 days.
10 Umbrella Indicates that the rain sensor is active
11 Seasonal Adjustment
Allows the user to make run time changes according to the seasons without reprogramming the controller.
Bars on the le allow quick visual reference to the seasonal adjustment percentage. When using Solar Sync
ET Sensor, will display seasonal adjust updated daily by sensor.
12 Rain Drop Indicates watering will occur on the selected day
13 Crossed Rain Drop Indicates the watering will NOT occur on the selected day
14 Calendar Indicates interval watering schedule has been programmed. Icon also appears when programming the
current day

EN
XCORE COMPONENTS
Terminal
block for -E
(International
models only)
Note: Plug may
look dierent from
illustration
Indoor Model
Outdoor Model
(Internal Transformer
Included)
5

EN
XCORE COMPONENTS
6
Wiring Compartment
15 Lithium Battery
The replaceable lithium battery (included) allows the controller to be programmed in the absence
of AC power. In addition, the battery will provide power for backup timekeeping in the event of a
power outage.
16 Internal Junction Box Junction box in outdoor models for making AC power connections
17 Terminal Strip Use to attach transformer, sensor, and valve wires from their source to the controller
18 Reset Button Use to reset the controller (located on right side of controller)
19 REM Allows for connection of Hunter SmartPort®and Hunter Remote Controls
20 Sensor Bypass Switch Ignores “Clik” weather sensor input when in Bypass position
Control Buttons
Button Increases the selected item ashing in the display
Button Decreases the selected item ashing in the display
Button Returns selected ashing display to previous item
Button Advances the selected ashing display to the next item
Button Selects program A, B, or C for dierent watering zone requirements

EN
XCORE COMPONENTS
Dial Settings
Run Normal dial position for all controller automatic and manual operation
Current Time/Day Allows current day and clock time to be set
Start Times Allows 1 to 4 start times to be set in each program
Run Times Allows user to set each valve station run time from 1 minute to 4 hours
Water Days Allows the user to select interval days to water
Seasonal Adjustment Allows user to make run time changes according to the seasons without reprogramming the controller.
Bars on the le allow quick visual reference to the seasonal adjustment percentage.
1Manual-One Station Allows user to activate a one-time watering of a single valve
System O Allows user to discontinue all programs and watering. Also allows the user to set the programmable
“rain o,” which stops watering for a period from 1 to 7 days
SOLAR SYNCSettings Allows user to program settings when using Solar Sync ET Sensor
External Transformer (Indoor Model Only)
A plug in transformer is provided to supply AC power to the controller
7

EN
MOUNTING THE CONTROLLER TO WALL
8
NOTE:The indoor version of the X-Core is not water-
proof or weather-resistant, and must be installed indoors
or in a protected area.
1. Secure one screw into the wall. Install screw anchors if attaching
to drywall or masonry wall.
2. Slide the keyhole on top of the controller over the screw.
3. Secure the controller in place by installing screws in the holes
below the terminal strip.
NOTE:Do not plug transformer into power source until
controller is mounted and all valve wiring has
been connected.
NOTE: For XC - x01 - A: If the supply cord is damaged, it
must be replaced by the manufacturer or service agent,
or a similarly qualied person in order to
avoid hazard.
C
A
B
NOTE: The door on outdoor units must remain closed
for maximum water resistance.

EN
Installation of the X-Core should only be done by trained personnel.
1. Route valve wires between the control valve location and controller.
2. At valves, attach a common wire to either solenoid wire on all
valves. This is most commonly a white colored wire. Attach a
separate control wire to the remaining wire of each valve. All
wire connections should be done using waterproof connectors.
3. Route the valve wires through the conduit. Attach the conduit
through the bottom right side of the controller.
4. Secure the white valve common wire to the C (Common) screw
on the terminal strip. Attach each of the individual valve control
wires to the appropriate station terminals and tighten their
screws.
5. Indoor Models: route the transformer cable through the hole on
the le side of the controller and connect the wires to the two
screws marked 24 VAC.
Outdoor Models: transformer wires are already connected to the
AC terminals so all that is required is to connect primary power
to the junction box (see below).
NOTE: X-Core outdoor models are water and
weather-resistant throughout document. Connecting
the outdoor X-Core to primary AC power should only be
done by a licensed electrician following all local codes.
Improper installation could result in shock or re hazard.
High Voltage Wiring (Outdoor Model only)
1. Route AC power cable and conduit through the ½" (13 mm)
conduit opening on the le side bottom of the cabinet.
2. Connect one wire to each of the two wires inside the junction
box. The ground wire should be connected to the green wire.
Wire nuts are provided to make these connections.
Note: For –E models only: Connect the wires to the AC
terminal block inside the junction box. AC supply wires must
be 14 AWG (1.85 mm) or larger with appropriate circuit breaker
for the wire size. A switch or circuit-breaker shall be included in
the building installation (in close proximity to the controller, wi-
thin easy reach of the operator) and marked as the disconnec-
ting device for the equipment.
3. Replace the junction box cover.
Valve Common Wire
CONNECTING VALVES AND TRANSFORMER
BAT
Connect the two transformer
wires to the two AC Terminals
Valve 4
Valve 3
Valve 2
Valve 1
Valve
Wires
NOTE: The indoor transformer cable should not be cut.
If the cable is cut, the red and white wires in the cable
must be joined together, or the controller will not work.
9

EN
ACTIVATING THE BATTERY
REPLACING THE BATTERY
A high-energy lithium battery is included with your X-Core
controller. The battery allows the user to remotely program the
controller without connecting AC power. It is also used to keep
the current time and day during power outage conditions.
To replace the battery:
1. Remove the screw from the battery holder.
2. Slide the battery holder down to access the battery.
3. Remove and replace the new battery into the battery holder
and reinstall the battery holder.
NOTE: This positive(+) side of the battery should face
the inside of the battery holder. Battery type: CR2032 3V
SEN C P 1 2 3 4 5 6 7 8
24VA C
BAT
Battery Compartment
Lithium Battery
Battery
Holder
(--) (+)
Aer installing your X-Core, make sure to remove the battery
contact insulator to allow the X-Core to keep time in the event of
a power outage.
10
CAUTION:
Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the
instructions.

EN
CONNECTING A MASTER VALVE
NOTE: Complete this section only if you have a
master valve installed in your irrigation system. A
master valve is a “normally closed” valve installed at the
supply point of the main line that opens only when the
controller initiates a watering program.
1. At the Master Valve, attach the common wire to either solenoid
wire of the valve. Attach a separate control wire to the remaining
solenoid wire.
2. The common wire should be attached to the Cterminal inside the
controller. The other wire coming from the master valve should
be attached to the Pterminal inside the controller. Tighten each
terminal screw.
SENCP12345678
24VA C
BAT
Master Valve
Valve 2
Valve 1
Valve 3
Valve 4
Master
Valve Wire
Valve Common Wire
Valve Wires
11

EN
PSR Series
Pump Start Relay
15 ft Minimum (4.5 m)
To Pump
START TIMES
SEASONAL ADJUSTMENT WATER DAYS
ALL
MANUAL-ALL STATIONS START TIMES
SYSTEM OFF CURRENT TIME/DAY
RUN TIMES
ACTIVE
SENSOR BYPASS
RUN
NOTE: Complete this section only if you have a
pump start relay installed. A pump start relay is
a device that uses a signal from the controller to
actuate a separate electrical circuit to energize a pump
to provide water to your system.
CONNECTING A PUMP START RELAY
The controller should be mounted at least a 15  (4.5 m) away from
both the pump start relay and pump to minimize any potential
electrical interference.
1. Route a pair of wires from the pump relay into the controller.
2. Connect a common wire to the C(common - typically a white
wire) terminal inside the controller and connect the remaining
wire from the pump start relay to the P(Pump) terminal.
Relay holding current draw must not exceed 0.3 A. Do not connect
the controller directly to the pump or damage to the controller
will result.
http://www.hunterindustries.com/support/controllers/
pump-start-relay
12

EN
CONNECTING A HUNTER “CLIK” WEATHER SENSOR
A Hunter weather sensor or other micro-switch type weather
sensors can be connected to the X-Core. The purpose of this sensor
is to stop automatic watering when weather conditions dictate.
1. Remove the metal jumper plate that is attached across the two
SEN terminals inside the controller.
2. Connect one wire to one SEN terminal and the other wire to the
other SEN terminal.
When the weather sensor has
deactivated automatic watering, the
OFF, and icon will appear on the
display.
Testing the Weather Sensor
The X-Core provides simplied testing of a rain sensor when the
sensor is wired into the sensor circuit. You can manually test proper
operation of the rain sensor by running an AUTO CYCLE or by
activating the system using the One Touch AUTO CYCLE (See page
22). During the Manual cycle, pressing the top spindle on the Hunter
sensor will interrupt watering.
Manually Bypassing the Weather Sensor
If the rain sensor is interrupting irrigation,
you can bypass it by using the bypass switch
on the front of the controller. Slide the
switch to the SENSOR BYPASS position to
disable the rain sensor from the system to
allow for controller operation. When using
the MANUAL – ONE STATION function, the
controller will automatically bypass sensor inputs for the selected
time. Once complete, the controller will default to selected settings.
SENCP12345678
REM
24VA C
BAT
/DAY
ACTIVE
BYPASS
NOTE: Enabling the Sensor Bypass switch has no
eect on the seasonal adjust updates from the Solar
Sync sensor. It will, however, bypass the Rain Clik
and Freeze - Clik functionality of the sensor.
13

EN
CONNECTING A HUNTER SOLAR SYNC ET SENSOR
The X-Core is compatible with the Solar Sync and Wireless Solar
Sync systems. Solar Sync is a sensor system that will automatically
adjust the X-Core controller’s watering schedule (based on changes
in local climate condition) by using the Seasonal Adjust function.
The Solar Sync uses a solar and temperature sensor to determine
evapotranspiration (ET), or the rate at which plants and turf use
water, and also includes Hunter Rain Clik and Freeze Clik technology
that will shut down irrigation when it rains and/or during freezing
conditions.
NOTE: Solar Sync will apply a default seasonal adjust
value of 100% until the rst full day (24 - hour period)
of weather measurements have been received from the
sensor.
NOTE: Enabling the Sensor Bypass switch has no eect
on the seasonal adjust updates from the Solar Sync
sensor. It will, however, bypass the Rain Clik and Freeze
Clik functionality of the sensor.
Installing Solar Sync Sensor
Connect the Green and Black wire from the Solar Sync Sensor to the
“SEN” wiring terminals on the X-Core
controller, similar to picture on page 11.
It does not matter which wire connects
to which terminal. Turn the dial to the
“Solar Sync Settings” position. The
display will initially show dashed lines
and then will show the default Region setting (3) on the le and
the default Water Adjustment setting (5) on the right. Adjust the
Region as needed by using the and buttons (refer to page 13
for explanation of Solar Sync Region setting). Use the button to
advance to the right to adjust the Water Adjust setting as needed
(see page 14 for explanation of Water Adjust setting).
Installing the Wireless Solar Sync
Connect the Green and Black wire from the Wireless Solar Sync
Receiver to the “SEN” wiring terminals on the X-Core controller. It
does not matter which wire connects to which terminal. Turn the
dial to the “Solar Sync Settings” position. The display will initially
show dashed lines and then will show the default Region setting
(3) on the le and the default Water
Adjustment setting (5) on the right.
Adjust the region as needed by using
the and buttons (refer to page
13 for explanation of Solar Sync Region
setting). Use the button to advance
to the right to adjust the Water Adjust setting as needed (see page
14 for explanation of Water Adjust setting).
Solar Sync Settings
Once the Solar Sync sensor is connected to the X-Core controller,
two numbers will appear in the display when the dial is turned to the
Solar Sync Settings position. The number on the le of the screen is
the Region setting, and the number on the right on the screen is the
Water Adjustment setting (as shown above).
NOTE: The Solar Sync module is not required for
installation using the X-core Controller.
14

EN
CONNECTING A HUNTER SOLAR SYNC ET SENSOR
Region

For accurate Solar Sync measurements, the controller needs to
be programmed for the average peak season ET for your region. Use
the table below to determine your region.
The table will assist you in identifying the type of region you live
in. There are four basic ET regions, each with descriptions of the
region, along with typical ET and temperature characteristics. It is
recommended that, if possible, the region be chosen based upon
average July ET or peak summer ET (inches/mm per day).
Use the following table for choosing your region (reference below).
You can use methods A, Bor Cto help you choose which region is
best for your area:
A: Based upon the ET of your region using the average July ET
or peak summer ET (inches/mm per day). This is the preferred
option when selecting your region.
B: Based upon the temperature for your region using the average
July or the driest month high temperature (not the highest
temperature for July).
C: Based upon the general description of your region.
• U.S. Northern States
• Coastal Regions
If the average July ET is
< 0.17" (4.3 mm) per day
If the average temperature for July is
65°– 75°
(18°C – 24°C)
If the average temperature for July is
75° – 85°
(24°C – 29°C)
• Mountains
• U.S. Northern Inland States
If the average July ET is 0.18" – 0.23"
(4.6 mm – 5.8 mm) per day
• U.S. Southern States
• Inland/High Desert
If the average July ET is 0.24" – 0.29"
(6.1 mm – 7.4 mm) per day
If the average temperature for July is
85° – 95°
(29°C – 35°C)
• Deserts
If the average July ET is > 0.30"
(7.6 mm) per day
If the average temperature for July is
95° – 105°
(35°C – 41°C)
* For Southern hemisphere locations, use the month of January.
Region
1
Region2
Region3
Region4
IF ANY OF THE CHOICES IN THE ROWS APPLY TO YOUR SITUATION, THEN THAT IS YOUR REGION SETTING CHOICE.
A B C
15

EN
CONNECTING A HUNTER SOLAR SYNC ET SENSOR
Water Adjustment

The Water Adjustment is a 1 to 10 scale that allows for easy
adjustment of the Seasonal Adjust value from the Solar Sync
ET Sensor. Upon installation of the Solar Sync ET Sensor, it is
recommended that the Water Adjustment setting stay at the default
value of 5. However, aer installation, if you nd that the seasonal
adjust value is lower or higher than expected, the Water Adjustment
value can be modied to modify the Seasonal Adjust output value.
See Calibration/Setup on page 15 for explanation of how to use
Water Adjustment scale to ne - tune seasonal adjust output value.
NOTE: If an individual zone is “wetter” or “drier” than
the rest of the system, simply increase or
decrease the amount of run time on the controller.
Uninstalling a Solar Sync Sensor
If a Solar Sync sensor has been installed on the X-Core controller,
then the seasonal adjust value used by the controller will be
calculated from the weather data supplied by the Solar Sync sensor.
If it is decided that the Solar Sync sensor will no longer be used
with the X-Core controller, it must be uninstalled. If the Solar Sync
sensor is not uninstalled, the controller will not allow the seasonal
adjust value to be manually changed. For example, if the seasonal
adjust value shown on the controller was 50% when the Solar Sync
sensor was removed, it will remain 50% until the Solar Sync sensor is
uninstalled.
To uninstall the Solar Sync sensor, simply disconnect the green and
black wires from the controller terminal and then turn the dial to
the “Solar Sync Settings” position. The display should show dashes,
indicating that the controller no longer recognizes the Solar Sync
sensor for calculation of seasonal adjustment. Now the seasonal
adjust value can be changed manually by turning the knob to the
“Seasonal Adjust” position and using the or button to adjust
the value.
16

EN
CONNECTING A HUNTER SOLAR SYNC ET SENSOR
Calibration/Setup
Aer Solar Sync has been installed and programmed, it is recommended to allow the system to run for a few days at the initial setting.
Because of the variety in site conditions (including sensor location, amount of direct sunlight available to the sensor, reective heat from
surrounding structures, etc), the initial setting may require adjustment in order to arrive at the desired performance. The calibration
of the Solar Sync to a particular site can easily be accomplished by adjusting the Region and/or Water Adjustment settings. The instructions
below outline this process:
1. Install Solar Sync sensor
2. Program Region and allow system to operate at initial setting for a minimum of 3 days (see page 13 for instructions on how to determine
proper Region setting).
3. Observe the Seasonal Adjust on the controller. If the Seasonal Adjust amount appears to be lower or higher than expected for that time of
year, the Solar Sync settings need to be adjusted.
a. Seasonal Adjust too low: Turn the dial to the Solar Sync settings position. Increase the value on the Water Adjustment scale (10 is max). Once
the setting is changed, the controller will immediately be updated with the new Seasonal Adjust %. Increase the Water Adjustment setting
until the desired Seasonal Adjust % is shown. If you max out the Water Adjustment scale at 10 and still require more Seasonal Adjust, move
down to the next lower Region (from Region 4 to 3, for example).
b. Seasonal Adjust too high: Turn the dial to the Solar Sync settings position. Decrease the value on the Water Adjustment scale (default setting
is 5). Once the setting is changed, the controller will immediately be updated with the new Seasonal Adjust %. Decrease the Water Adjustment
setting until the desired Seasonal Adjust % is shown. If you minimize the Water Adjustment scale down to 1 and still require a reduction in
Seasonal Adjust, move up to the next Region (from Region 2 to 3, for example).
Station Run Times: It is important to understand that Solar Sync provides a global seasonal adjustment to the controller. This means that
all station run times will be modied by the seasonal adjust percentage shown. When programming the controller, the run times should be
entered that represent peak season watering schedules. If the Solar Sync is adjusting to the appropriate seasonal adjust value but the run time
for a particular station appears to be too long/short, adjust the station run time in the controller program.
17

EN
Solar Sync Delay for X-CORE
The delay feature is accessible only aer the installation
of the Solar Sync. The Solar Sync Delay feature allows the user to
postpone seasonal adjustment changes from being made
by Solar Sync for up to 99 days.
While the Solar Sync Delay is active, the Solar Sync will continue to
collect and store data.
Operation:
To access the Solar Sync Delay setting:
1. Place the dial in the RUN position; press and hold the button,
rotate the dial to the Solar Sync position then release the
button. The following screen will be presented: d:XX (where d
indicates days and XX indicates the number of days
to be delayed).
2. Press the or button to increase/decrease the number
of days the delay should run. Once the desired number of days
is displayed, move the dial back to the RUN position to activate
the delay.
To change the existing Delay days setting:
1. Open the Solar Sync Delay menu by pressing the button and
rotating the dial to Solar Sync Settings and release the
button.
2. Use the + or - keys to modify the number of days until desired
numbers of delay days is displayed. (Setting the days to 00 turns
Solar Sync Delay to OFF.)
3. Return the dial to the RUN position for the changes to
take eect.
While Solar Sync Delay is active, the Solar Sync will continue
to gather weather information and calculate the Seasonal
Adjust Value. The updated seasonal adjust will be applied once the
Solar Sync Delay days reach 00.
NOTE: The number of days remaining will not be
displayed on the RUN screen. To check if the Delay
feature is active, open the Solar Sync Delay menu
and check the days displayed. If 1 or more days are
displayed, then Solar Sync Delay is active, if 00 is
displayed, then Solar Sync Delay is not active.
SOLAR SYNC DELAY FEATURE
18

EN
CONNECTING A HUNTER REMOTE
Connecting to a Hunter Remote (not included)
The X-Core Controller is compatible with Hunter Remote Controls
(not included). The SmartPort®wiring harness (included with all
Hunter Remotes) allows for fast and easy use of the Hunter controls.
The Hunter remotes make it possible for you to operate the system
without having to walk back and forth to the controller.
To install the SmartPort connector
1. Install a ⁄" Female threaded “Tee” in
the eld wiring conduit (not included)
approximately 12 inches below the
X-Core.
2. Feed the red, white, and blue wires
of the harness through the base of
the “Tee” and into the wiring
compartment as shown.
3. Screw the SmartPort harness
housing into the “Tee” as shown.
4. Attach the red, white, and blue SmartPort wires to the
controller terminal as shown below:
• Red wire to le side “24 VAC” terminal
• White wire to right side “24 VAC” terminal
• Blue wire to “REM” terminal
1/2" Thread
To Controller
Pre-assembled Assembled
POWER FAILURES
Due to the possibility of power failures, the controller has non-volatile memory. Programmed information will never be lost due to a power
outage. The lithium battery will keep the correct time without AC power. Normal watering will resume when AC power is restored.
SEN C P 1 2 3 4 5 6 7 8
24VA C
red
white
blue
NOTE: P/N 258200 can be used as
an alternate method to mount the
SmartPort connector.
19

EN
NOTE: A basic programming rule is that whatever
symbol or character is ashing will be the item
programmed. For instance, if the hour is ashing
when setting the time, the hour can be changed or
programmed. For illustration purposes in this manual,
ashing characters are in GRAY type.
The X-Core display shows the time and day when the controller is
idle. The display changes when the dial is rotated to indicate the
specic programming information to enter. When programming, the
ashing portion of the display can be changed by pressing the
or
buttons. To change something that is not ashing, press the
or buttons until the desired eld is ashing.
Three programs A, B, and C, each with the ability to have four daily
start times, permit plants with dierent watering requirements to be
separated on dierent day schedules.
PROGRAMMING THE CONTROLLER
Setting the Date and Time
1. Turn the dial to the CURRENT TIME/DAY position.
2. The current year will be ashing. Use the or buttons to
change the year. Aer setting the year, press the button to
proceed to setting the month.
3. The month and day will be in the display. The month will be
ashing and the icon will be displayed. Use the or
buttons to change the month. Press the button to proceed
to setting the day.
4. The day will be ashing and the icon will be displayed. Use
the or buttons to change the day. Press the button to
proceed to setting the time.
5. The time will be displayed. Use the and buttons to select
AM, PM, or 24 hour. Press the button to move to hours. Hours
will be ashing. Use the and buttons to change the hour
shown on the display. Press the button to move to minute.
Minutes will be ashing. Use the and buttons to change
the minutes shown on the display. The date, day, and time have
now been set.
CURRENT TIME/DAY
12
31
20