Hunter Pro-HC601-A User manual

hunterindustries.com
Quick Start Guide
Hydrawise™Ready

2
Installation 3
Connecting AC Power 5
Connecting Station Wires 7
Connecting Sensors or Flow Meters 8
Connecting to a Wi-Fi Network 9
App Conguration 10

3

4

5
Note: The indoor Pro-HC is not water or weather resistant, and must be installed
indoors or in a protected area. This device is not intended for use by young children.
Never let children play with this device.

6
HOT
(Black)
NEUTRAL
(White)
GROUND
(Green)
Note: To be performed by a licensed electrician only. Always use UL listed ½" (13 mm)
conduit with male adapter when installing AC wiring. Pro-HC controllers are
intended to be supplied AC power with an over-current protected device. Improper
installation could result in shock or re hazard. This device is not intended for use by
young children. Never let children play with this device.

7

8
Wiring for standard Hydrawise 0.75" (20mm) or
1" (25mm) ow meters is as follows:
Flow Meter Wire Label on Controller
Blue SEN-1, SEN-2
White SEN COM
Red Not connected
Wiring for open/closed contact sensors is as follows:
Sensor Wire Label on Controller
Normally Open /
Normally Closed wire SEN-1, SEN-2
Second (common) wire SEN COM

9

10