Hunter GPS-DTR 25000 User manual

DOG TRAINING COLLAR WITH GPS TRACKER
MODELS: GPS-DTR 25000-25002-25003 (GPS and Training unction)
GPS 25000-25002-25003 (No Training unction)
PRODUCT INCLUDES:
Collar, USB Charger, USB Cable, Adapter
Remote Control and antenna, long/ hort probe if trainer
PREPARING THE GPS-TRAINING COLLAR OR IRST USE
Charge the collar for 7-8 hour . The battery ha a tandby time of 20 hour when fully charged. Connect the
mall USB adapter to the USB cable, and then the cable to the USB charger. Then connect the charger to the
collar a hown on the picture below. Lift the orange pla tic protective cover and connect the charger. Now
witch on the collar. To witch it on, hold for 1 econd the back ide of the remote control at the USB output
(where the built-in magnet i ), at the point where the collar indicator led i . Then remove the remote control.
The red indicator led of the collar will continuou ly light howing that the device i charging. In order to
complete a full charge you need to witch off the collar with the remote control magnet.
After 7-8 hour of charging, remove the charger. To witch off the collar, hold for 4 econd the remote
control part (where the built-in magnet i ) at the point where the collar indicator led i .

The remote control hould be charged for 4-5 hour . Connect the charger to the remote control USB
connector on the top.
PAIRING AND USE THE GPS-TRAINING COLLAR
The collar you purcha ed i already paired with the remote control. If you want to pair it again, follow the
in truction below. The remote control can control up to 9 collar . The remote control ha a + and a - button
for collar election to end command .
PAIRING: Switch on the remote control from the ON / OFF button, then witch on the collar. When the
collar i witched on the red indicator led of the collar fla he . Pre for 4-5 econd the creen light button
and the peaker icon on the creen will tart fla hing. The remote control i in tuning mode. Now hold for 10
econd the back of the remote control (where the built-in magnet i ) at the point where the collar indicator
led i located. After 10 econd remove the remote control from the collar and if you hear 3 con ecutive beep
ound from the collar, pre the hock command button for 2 econd . You will hear a beep ound,
indicating that the ync wa ucce ful.
Repeat the ame procedure if you want to ync other collar .
When you fini h adju ting the collar , pre the audio command button to return the remote control to
normal operation.
When you pre the remote control hock button, a hock command i ent to the corre ponding collar. Each
time you pre the audio command or the pu h button or the audio + hock button, the creen fla he ,
indicating that the command i being ent to the collar. The level of hock fluctuate u ing the number
button on the remote control from 1 to 8. Level 1 i the lowe t and level 8 i the highe t.
After u e, you can witch off the remote control u ing the ON / OFF witch.
TIPS OR USING THE GPS-TRAINING COLLAR
The device i pecially de igned for hunting dog and work under har h condition (rain, den e vegetation
etc). It i lightweight, durable and i ideal for both mall and large ize dog .
The collar hould be po itioned on the bottom of the dog' neck (facing the ground). The two probe hould
touch the dog' kin o it can feel the timulu . Place it tight on the neck and if the dog ha long fur, trim it
lightly o that the probe make contact with the kin.
You need to find the right power level for your dog. Start from level 1 and if you ee no reaction u e level 2.
Increa e the level until you ee a reaction from the dog. When the dog react you have found the level you
need to u e. If you u e level 8 which i the highe t and you ee no reaction from the dog then the collar ha
not been properly placed on it neck. It hould be tight and if the dog ha long fur, trim it o the probe make
contact with the kin. U e hort or long probe depending on the dog' fur.
Alway be pre ent during the charging proce of the device . It i recommended to charge once per month
during the period you do not u e the device and tore it alway charged in a dry place with temperature
below 40 degree . We advi e to charge the collar and the remote control prior to each u e.

GPS TRACKER
The collar ha a build-in GPS antenna and the remote control a Bluetooth module. The remote control
communicate with the mobile phone or tablet via Bluetooth. The mobile phone or tablet mu t be Android
4.4 or later ver ion and Bluetooth ver ion 4 or 5. To ynchronize the remote with your mobile, follow the e
tep :
1. Download and in tall the app on your mobile.
2. Turn on the remote control from the witch.
3. Start the application.
4. You will ee the picture below (fir t). Select Start Scan and then tap the Bluetooth icon ( econd picture) and
you'll go traight to the map.
5. You can ee on the map a dog' head indicating the dog' po ition (the collar mu t be outdoor facing the ky)
6. By tapping the dog' head on the application you can ee the di tance between the u er and the collar.
The following picture how how to elect the time interval for GPS information, and the button of the
remote control on the application. You can elect 2 = 60 econd , 3 = 30 econd , 4 = 20 econd , 5 = 15
econd , 10 = 2 econd for the GPS info pack.
WARRANTY
We offer 1 year warranty and quick ervice upon expiry. The warranty doe not cover the built-in
rechargeable batterie of the collar and the remote control.